Technical Service Bulletins (TSBs) for the 2014 XV Crosstrek are official communications between Subaru & their dealerships that describe processes for troubleshooting or fixing certain common problems.
All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
SERVICE BULLETIN IF YOU RECEIVE A CUSTOMER CONCERN OF THE EPS WARNING LIGHT COMING ON AND DIAGNOSTICS SHOW A DTC C2532 STORED IN MEMORY, A NEW EPS CONTROL UNIT IS NOW AVAILABLE TO ADDRESS THIS CODE. Read More »
SUBARU: AN ISSUE OF INCREASE STEERING EFFORT, ELECTRIC POWER STEERING (EPS) WARNING LIGHT COMES ON WITH DIAGNOSTIC TROUBLE CODE (DTC) C2532 AND TO ADDRESS CODE A NEW EPS CONTROL UNIT THAT IS AVAILABLE. Read More »
This bulletin announces a design change to the front strut mounts intended to address customer concerns of a popping-type sound which may be heard when making low speed turns. Read More »
(ALL EXCEPT Hybrid Models) REVISED This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. Read More »
THIS BULLETIN INFORMS OF A PARTS CHANGE TO THE BRAKE SYSTEM MASTER CYLINDER AND VACUUM BOOSTER. WHENEVER REPLACEMENT OF EITHER OF THESE COMPONENTS IS REQUIRED, THE IDENTIFICATION PROCEDURE PROVIDED BELOW MUST BE FOLLOWED TO INSURE THE ... Read More »
THIS BULLETIN INFORMS OF A PARTS CHANGE TO THE BRAKE SYSTEM MASTER CYLINDER AND VACUUM BOOSTER. WHENEVER REPLACEMENT OF EITHER OF THESE COMPONENTS IS REQUIRED, THE IDENTIFICATION PROCEDURE PROVIDED BELOW MUST BE FOLLOWED TO INSURE THE ... Read More »
SERVICE BRAKES, AIR:SUPPLY:HOSES, LINES/PIPING, AND FITTINGS
This Service Information bulletin announces availability of a new front brake pad shim kit to specifically address customer concerns of a squeaking or squealing sound on the models listed. Read More »
2013-14MY Legacy and Outback Models with 2.5L FB Engines, 2011-14MY Forester Models with 2.5L FB Engines, 2015 MY Forester (Manual Transmissions Only), with 2.5L FB Engines, 2012-13 MY Impreza and XV Crosstrek Models with 2. Read More »
This Service Information bulletin announces a material change to the engine accessory drive / v-belt made to address customer concerns of a slipping belt (squeal or chirping) sound. Read More »
2013-14MY Legacy and Outback Models with 2.5L FB Engines - 2011-14MY Forester Models with 2.5L FB Engines - 2015 MY Forester (Manual Transmissions Only) with 2.5L FB Engines - 2012-13 MY Impreza and XV Crosstrek Models with 2. Read More »
This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. Read More »
Revised TSB. As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable ... Read More »
Revised TSB. As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable ... Read More »
THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES TO OPTIMIZE THE DRIVE MOTOR CONTROL MODULE (DMCM), PART OF THE HYBRID ELECTRICAL SYSTEM. Read More »
"PROPOSED ENGINE OIL CONSUMPTION CLASS ACTION SETTLEMENT RECENTLY YOU MAY HAVE SEEN VARIOUS ONLINE AND OTHER MEDIA ARTICLES REGARDING SUBARU OF AMERICA, INC. Read More »
REVISED SERVICE BULLETIN: SURFACE TREATMENT CHANGE TO OIL CONTROL PISTON RINGS THIS BULLETIN ANNOUNCES INFORMATION REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND ... Read More »
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH ... Read More »
THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES TO ADDRESS CUSTOMER CONCERNS OF AN EXTENDED CRANKING TIME BEFORE THE ENGINE STARTS. Read More »
THIS BULLETIN ANNOUNCES THE AVAILABILITY OF REPROGRAMMING FILES AND A REVISED OIL LEVEL SWITCH TO OPTIMIZE THE ECM LOGIC FOR ENGINE OIL LEVEL DETECTION IN THE EVENT OF FALSE OR PREMATURE LOW ENGINE OIL LEVEL WARNING LAMP ILLUMINATION. Read More »
HYBRID MODELS ONLY. This Service Information bulletin provides revised diagnostics to follow when troubleshooting a DTC P0C79, ?Drive Motor ?A? Inverter Voltage Too High?. Read More »
HYBRID MODELS ONLY. This bulletin announces the availability of reprogramming files to optimize the ECM and address DTCs P0A78 and P1C2A. When either of these DTCs is stored, the Hybrid/HEV functions are inoperative. Read More »
HYBRID MODELS ONLY. In conjunction with current TSB 16-94-15R, this bulletin provides a new service procedure for repairing the drive motor case assembly. Read More »
This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. Read More »
This Service Information bulletin announces a design change to the internal contact portion of the oil pressure switch to increase durability Read More »
This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Read More »
This Service Information bulletin provides revised procedures for inspection and measurement of the cylinder block assembly to determine whether or not replacement is necessary. Read More »
This Service Information bulletin announces a material change to the engine accessory drive / v-belt made to address customer concerns of a slipping belt (squeal or chirping) sound. Read More »
THIS BULLETIN ANNOUNCES A CHANGE TO THE POWER SUPPLY RELAY USED FOR THE DRIVE MOTOR CONTROL MODULE (DMCM) AND THE COOLING FAN / DRIVE MOTOR INVERTER. Read More »
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)
This Service Information bulletin announces a change to the shape of the rubber cap used on the flange nuts securing the sub-level sending unit to the fuel tank. In addition, two of the caps are now used in production instead of only one. Read More »
HEV MODELS ONLY. This Service Information bulletin informs of a potentially incorrect display when a DTC is stored in either the Hybrid Power Control Module (HPCM) or in the OBD menu, Mode $02 while retrieving freeze-frame data (FFD). Read More »
CVT MODELS ONLY. In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and ... Read More »
CVT MODELS ONLY. In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and ... Read More »
Revised TSB. As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable ... Read More »
Revised TSB. As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable ... Read More »
This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Read More »
THIS BULLETIN PROVIDES A PROCEDURE FOR DIAGNOSING A CUSTOMER CONCERN OF A DELAYED AND / OR HARSH ENGAGEMENT OF THE CVT (MODEL TR580) WHEN SHIFTING INTO REVERSE OR DRIVE FROM NEUTRAL. Read More »
2013-14MY Legacy and Outback Models with 2.5L FB Engines, 2011-14MY Forester Models with 2.5L FB Engines, 2015 MY Forester (Manual Transmissions Only), with 2.5L FB Engines, 2012-13 MY Impreza and XV Crosstrek Models with 2. Read More »
TSB: All Models Equipped with CVT Transmissions. This Service Information bulletin provides a new flow chart and additional diagnostic tools to assist Technicians with troubleshooting DTC P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE. Read More »
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. Read More »
This bulletin has been developed to outline the steps for gathering basic essential information during diagnosis and repair of the Infotainment concerns. (Applicable to all models with Harman or Denso CP1 Infotainment). Read More »
HEV MODELS ONLY. This Service Information bulletin informs of a potentially incorrect display when a DTC is stored in either the Hybrid Power Control Module (HPCM) or in the OBD menu, Mode $02 while retrieving freeze-frame data (FFD). Read More »
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
HYBRID MODELS ONLY. This bulletin announces the availability of reprogramming files to optimize the ECM and address DTCs P0A78 and P1C2A. When either of these DTCs is stored, the Hybrid/HEV functions are inoperative. Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
This bulletin announces availability of new VDC Control Module & Hydraulic Units (VDCCM&H/U) to address isolated customer concerns of the green Hill Holder light blinking and cancel warning alarm sounding during cranking / starting ... Read More »
This bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s (e. g. Read More »
This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Read More »
This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Read More »
THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES TO OPTIMIZE THE DRIVE MOTOR CONTROL MODULE (DMCM), PART OF THE HYBRID ELECTRICAL SYSTEM. Read More »
THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES TO OPTIMIZE THE DRIVE MOTOR CONTROL MODULE (DMCM), PART OF THE HYBRID ELECTRICAL SYSTEM. Read More »
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. Read More »
Effective immediately, the Stop / Start battery used in the 2014 & 2015 Crosstrek Hybrid models should be ordered through the Interstate Battery program under PN SOA821B500. Read More »
PLEASE REVIEW THE NEW HYBRID BATTERY AREA OF THE FIXED OPERATION POLICIES AND PROCEDURES MANUAL. THE MANUAL CAN BE FOUND AT SUBARUNET / FIXED OPS ?] INVENTORY OPS / PARTS POLICIES AND PROCEDURES. Read More »
SERVICE BULLETIN IF YOU RECEIVE A CUSTOMER CONCERN OF THE EPS WARNING LIGHT COMING ON AND DIAGNOSTICS SHOW A DTC C2532 STORED IN MEMORY, A NEW EPS CONTROL UNIT IS NOW AVAILABLE TO ADDRESS THIS CODE. Read More »
All 2012 to 2015 Models Equipped with Fujitsu Ten (F10) Generation 1 (Gen1) Audio / Navigation Systems. This bulletin announces a new procedure for updating the operating software used in F10 Gen1 audio / navigation systems. Read More »
THIS SERVICE INFORMATION BULLETIN CONTAINS A SERIES OF SCREEN SHOTS WITH INSTRUCTIONS WHICH PROVIDE A PROCEDURE FOR PAIRING ANDROID SMARTPHONES TO BLUETOOTH-EQUIPPED CLARION AUDIO UNITS. Read More »
(ALL EXCEPT Hybrid Models) REVISED This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. Read More »
This bulletin provides information regarding design changes to the rear combination lamp assembly to prevent fogging and accumulation of condensation. Read More »
This bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s (e. g. Read More »
EXCLUDES HYBRID MODELS. This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. Read More »
This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. Read More »
SUBARU: ON SOME VEHICLES, TO REDUCE POSSIBILITY OF IMPROPER ILLUMINATION, A CHANGE IN DESIGN FOR STOP LIGHT SWITCH FOR ABS AND/OR VDC WARNING LAMP. MODELS 2012-14 IMPREZA, XV CROSSTREK (EXCEPT HYBRID), 2008-14 WRX, STI, 2014 FORESTER. Read More »
This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Read More »
This bulletin announces a change to the procedure used in production of the rear door glass assembly. The bottom edge of the door glass is pressed into a metal channel lined with rubber. Read More »
This Service Information bulletin announces a design change to the retractable portion of the tonneau cover made to address customer concerns of the cover retracting on its own while driving on rough roads. Read More »
SUBARU: A CHANGE HAS BEEN MADE TO THE MOUNTING BOLTS USED FOR SECURING THE FRONT CROSS MEMBER TO THE VEHICLE BODY. THE THICKNESS OF THE FLANGE AT THE BASE OF THE BOLT'S HEX HAS INCREASED TO 5MM. ALSO INCLUDED SUBARU STI/BRZ MODEL YEAR 2014. Read More »
This bulletin announces availability of a new front door checker mechanism designed to hold the doors more securely when they are in partially open / closed positions. An additional detent position has also been added. Read More »
THIS BULLETIN ANNOUNCES AVAILABILITY OF A REVISED FRONT DOOR CHECKER MECHANISM DESIGNED TO HOLD THE FRONT DOORS MORE SECURELY WHEN THEY ARE IN PARTIALLY OPEN POSITIONS. AN ADDITIONAL DETENT POSITION HAS ALSO BEEN ADDED. Read More »
This bulletin announces availability of a new front door checker mechanism designed to hold the doors more securely when they are in partially open / closed positions. An additional detent position has also been added. Read More »
This bulletin provides a procedure for replacement of the black foam rubber insulating cushions for the roof rails. In rare cases, the cushion(s) may come loose and begin to protrude from under the roof rails where they contact the body. Read More »
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. Read More »
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. Read More »
FRONT CROSS MEMBER MOUNTING BOLT CHANGE - THIS BULLETIN DESCRIBES A DESIGN CHANGE MADE TO THE MOUNTING BOLTS USED FOR SECURING THE FRONT CROSS MEMBER TO THE VEHICLE BODY. Read More »
This bulletin announces a design change to the front seat back upholstery retaining hooks (HOOK FLAT MAT). The change is in response to customer concerns of discomfort coming from the center of the seat back and outside bolsters. Read More »
This bulletin announces a design change to the front seat back upholstery retaining hooks (HOOK FLAT MAT). The change is in response to customer concerns of discomfort coming from the center of the seat back and outside bolsters. Read More »
This bulletin announces a design change made to the front seat outer hinge cover trim panels. In some cases, when exiting the vehicle, the trim panel may inadvertently get kicked and become dislodged from the seat cushion assembly. Read More »
All Models Listed with Seat Lifter Feature. This bulletin provides a procedure to address a customer reported cosmetic condition of surface rust appearing on the inner seat cushion frame of the front seat assemblies. Read More »
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. Read More »
To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool. Read More »
To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool. Read More »
HYBRID MODELS ONLY. This bulletin announces the availability of reprogramming files to optimize the ECM and address DTCs P0A78 and P1C2A. When either of these DTCs is stored, the Hybrid/HEV functions are inoperative. Read More »
This bulletin announces a design change to the A/C Condenser receiver-dryer assembly. The change involves the addition of a rubber end cap and retaining clip onto the bottom of the receiver-dryer tank portion to prevent corrosion ... Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
This bulletin announces a design change to the front seat back upholstery retaining hooks (HOOK FLAT MAT). The change is in response to customer concerns of discomfort coming from the center of the seat back and outside bolsters. Read More »
This bulletin announces a design change to the front seat back upholstery retaining hooks (HOOK FLAT MAT). The change is in response to customer concerns of discomfort coming from the center of the seat back and outside bolsters. Read More »
CVT MODELS ONLY. In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and ... Read More »
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. Read More »
This Service Information bulletin announces a design change to the retractable portion of the tonneau cover made to address customer concerns of the cover retracting on its own while driving on rough roads. Read More »
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. Read More »
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH ... Read More »
THIS BULLETIN INFORMS OF A PARTS CHANGE TO THE BRAKE SYSTEM MASTER CYLINDER AND VACUUM BOOSTER. WHENEVER REPLACEMENT OF EITHER OF THESE COMPONENTS IS REQUIRED, THE IDENTIFICATION PROCEDURE PROVIDED BELOW MUST BE FOLLOWED TO INSURE THE ... Read More »
This bulletin provides information regarding design changes to the rear combination lamp assembly to prevent fogging and accumulation of condensation. Read More »
FRONT CROSS MEMBER MOUNTING BOLT CHANGE - THIS BULLETIN DESCRIBES A DESIGN CHANGE MADE TO THE MOUNTING BOLTS USED FOR SECURING THE FRONT CROSS MEMBER TO THE VEHICLE BODY. Read More »
BY NOW, ALL DEALERSHIPS SHOULD HAVE RECEIVED SPECIAL TOOLS FOR THE XV CROSSTREK HYBRID. INCLUDED IN THIS PACKAGE ARE VARIOUS SIZES OF HIGH VOLTAGE INSULATION GLOVES AND LEATHER PROTECTION GLOVES. Read More »
THE FOLLOWING ARE THE SHIPMENTS OF REQUIRED TOOLS FOR THE UPCOMING SUBARU CROSSTREK HYBRID. THESE TOOLS WILL BE SHIPPED DIRECTLY TO ALL DEALERS DURING NOVEMBER. Read More »
THE FOLLOWING ARE THE SPECIAL TOOLS THAT ARE REQUIRED FOR THE 2014 MY. THESE TOOLS WILL BE SHIPPED DIRECTLY TO ALL DEALERS DURING MARCH. THE CHART DESCRIBES EACH OF THE TOOLS IN THE SHIPMENT. Read More »
This Service Information bulletin provides a new troubleshooting chart to use when diagnosing a DTC B1760 related to the Occupant Detection System (ODS). Read More »
SUBARU: ON SOME VEHICLES, TO REDUCE POSSIBILITY OF IMPROPER ILLUMINATION, A CHANGE IN DESIGN FOR STOP LIGHT SWITCH FOR ABS AND/OR VDC WARNING LAMP. MODELS 2012-14 IMPREZA, XV CROSSTREK (EXCEPT HYBRID), 2008-14 WRX, STI, 2014 FORESTER. Read More »
All 2012 to 2015 Models Equipped with Fujitsu Ten (F10) Generation 1 (Gen1) Audio / Navigation Systems. This bulletin announces a new procedure for updating the operating software used in F10 Gen1 audio / navigation systems. Read More »
FRONT CROSS MEMBER MOUNTING BOLT CHANGE - THIS BULLETIN DESCRIBES A DESIGN CHANGE MADE TO THE MOUNTING BOLTS USED FOR SECURING THE FRONT CROSS MEMBER TO THE VEHICLE BODY. Read More »
CVT MODELS ONLY. In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and ... Read More »
CVT MODELS ONLY. In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the Continuously Variable Transmission (CVT) on the above listed models and ... Read More »
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
Revised TSB. As part of our dedication to customer satisfaction, Subaru of America, Inc. is initiating a program to extend the original New Car Powertrain Limited Warranty coverage for excessive engine oil consumption on applicable ... Read More »
Oil Consumption Class Action Claim Notice Clarification VIN break point clarification Memo. Recently SOA has become aware of some retailer questions regarding the VIN breakpoint information supplied as part of the class action notice. Read More »
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. Read More »
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. Read More »
THIS BULLETIN CONTAINS ILLUSTRATIONS OF EXCHANGE COMPONENTS AND THEIR MANUFACTURER AS WELL AS A DESCRIPTION OF THE PROPER EXCHANGE PROCEDURE. THE EXCHANGE PROGRAM POLICY CAN ALSO BE FOUND IN SECTIONS 8.4.9 AND 11.2. Read More »
THIS BULLETIN CONTAINS ILLUSTRATIONS OF EXCHANGE COMPONENTS AND THEIR MANUFACTURER AS WELL AS A DESCRIPTION OF THE PROPER EXCHANGE PROCEDURE. THE EXCHANGE PROGRAM POLICY CAN ALSO BE FOUND IN SECTIONS 8.4.9 AND 11.2. Read More »
THE RELEASE OF THE 2014 XV CROSSTREK HYBRID BRINGS WITH IT A GREAT DEAL OF NEW TECHNOLOGY AND INNOVATION. CHIEF AMONG THESE ARE START/ STOP AND EV MODE DRIVE OPERATIONS. Read More »
"THE ?ALL-NEW? 2014 XV CROSSTREK HYBRID WILL SOON BE ARRIVING AT YOUR DEALERSHIP. BEGINNING MONDAY DECEMBER 16, 2013 THROUGH MARCH 2014, THERE WILL BE A SPECIAL QUALITY MONITORING TEAM HERE IN THE U.S. FROM FUJI HEAVY INDUSTRIES (FHI). Read More »
SUBARU SERVICE TRAINING IS PLEASED TO ANNOUNCE THE RELEASE OF THE 702 HYBRID VEHICLE TECHNICAL TRAINING COURSE. THIS COURSE FOCUSES ON THE ALL NEW HYBRID DRIVE SYSTEM AVAILABLE IN THE 2014 CROSSTREK. Read More »
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. Read More »
THIS BULLETIN CONTAINS ILLUSTRATIONS OF EXCHANGE COMPONENTS AND THEIR MANUFACTURER AS WELL AS A DESCRIPTION OF THE PROPER EXCHANGE PROCEDURE. THE EXCHANGE PROGRAM POLICY CAN ALSO BE FOUND IN SECTIONS 8.4.9 AND 11.2. Read More »
This bulletin announces a design change to the front seat back upholstery retaining hooks (HOOK FLAT MAT). The change is in response to customer concerns of discomfort coming from the center of the seat back and outside bolsters. Read More »
This bulletin announces a design change to the front seat back upholstery retaining hooks (HOOK FLAT MAT). The change is in response to customer concerns of discomfort coming from the center of the seat back and outside bolsters. Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2. Read More »
This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. Read More »
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. Read More »
This bulletin announces a design change to the A/C Condenser receiver-dryer assembly. The change involves the addition of a rubber end cap and retaining clip onto the bottom of the receiver-dryer tank portion to prevent corrosion ... Read More »
Models with Manual HVAC Systems only. This Service Information bulletin provides precautions to use when removing the HVAC control panel to prevent damaging the blower fan speed switch. Read More »
This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Read More »
