Technical Service Bulletins (TSBs) for the 2018 Crosstrek are official communications between Subaru & their dealerships that describe processes for troubleshooting or fixing certain common problems.
All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
This bulletin announces the design change made to the cowl panel. The change was made to address a small number of cases where the rubber sealing portion becomes separated. Read More »
This bulletin announces availability of a new electric power steering (EPS) rack assembly. The new EPS assembly addresses a limited number of customer concerns involving a rattling-type sound from the steering which may be heard when ... Read More »
Models with Automatic Headlight Beam Leveler System only. This Service Information bulletin announces a revision to the diagnostic procedure used when diagnosing either DTC B2910 or 2911 ?Steering Responsive Headlight Communication? LH ... Read More »
This bulletin announces availability of a new electric power steering (EPS) rack assembly. The new EPS assembly addresses a limited number of customer concerns involving a rattling-type sound from the steering which may be heard when ... Read More »
This bulletin provides a procedure to address customer concerns of surface rust accumulating in the top center retaining nut area of the front strut mounts. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2019 model year Forester and 2018-2019 model year Crosstrek vehicles to inspect and, if necessary, correct the condition of the rear stabilizer bracket bolts. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2019 model year Forester and 2018-2019 model year Crosstrek vehicles to inspect and, if necessary, correct the condition of the rear stabilizer bracket bolts. Read More »
This bulletin provides a service procedure to address a squeaking-type sound from the rear suspension area customers may hear when going over bumps. Read More »
This Service Information Bulletin outlines design changes made to the rear frame section weld nuts and the mounting bolts used to secure the rear stabilizer bar brackets. Read More »
This Service Information Bulletin outlines design changes made to the rear frame section weld nuts and the mounting bolts used to secure the rear stabilizer bar brackets to them. Read More »
This Service Information Bulletin announces a change made to the rear subframe retaining bolts used on the models listed above. The design changes provide the bolt with an increased durability against rust. Read More »
This bulletin provides a procedure to address customer concerns of surface rust accumulating in the top center retaining nut area of the front strut mounts. Read More »
This Service Information Bulletin is intended to clarify the proper ordering procedure to use in the rare case when an individual brake hose component of the WUR-03R Service Campaign kit is needed. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a service program to replace brake hoses that may swell due to fluid which can squeeze in between the hosea??s inner and outer layers. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a service program to replace brake hoses that may swell due to fluid which can squeeze in between the hosea??s inner and outer layers. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a service program to replace brake hoses that may swell due to fluid which can squeeze in between the hosea??s inner and outer layers. Read More »
In the intrest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a service program to replace brake hoses that may swell due to fluid which can squeeze in between the hose's inner and outer layers. Read More »
This bulletin announces a design change made to the rear wheel / brake backing plates. Under certain circumstances, some customers may have a concern regarding a howling-type sound from the rear of the vehicle later diagnosed as a ... Read More »
This Service Information Bulletin announces a design change to the ABS wheel speed sensor assemblies. The change optimizes moisture and corrosion resistance of the sensor harness casing. Read More »
This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. Read More »
This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. Read More »
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER
This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. Read More »
SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:WHEEL SPEED SENSOR
This Service Information Bulletin announces a design change to the ABS wheel speed sensor assemblies. The change optimizes moisture and corrosion resistance of the sensor harness casing. Read More »
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
(Owner Letter) As part of Subaru of Americaa??s dedication to customer satisfaction, this letter is to inform you of an extension to the Basic New Car Limited Warranty for your vehiclea??s CVT Parking Brake Switch. Read More »
This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. Read More »
This bulletin provides a procedure for addressing a limited number of concerns involving a tapping -type sound originating from the area where the engine and CVT are joined. Read More »
This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. Read More »
Subaru of America, Inc. (SOA) is initiating a service program for certain 2017-2019 MY Impreza vehicles, and certain 2018-2019 MY Crosstrek vehicles. This service program involves installation of reprogramming files to optimize the ECM. Read More »
Subaru of America, Inc. (SOA) is initiating a service program for certain 2017-2019 MY Impreza vehicles, and certain 2018-2019 MY Crosstrek vehicles. This service program involves installation of reprogramming files to optimize the ECM. Read More »
This Service Information Bulletin announces diagnostic service procedures to be followed when DTC P0420 (Catalyst System Efficiency Below Threshold Bank 1) is detected by the Engine Control Module (ECM). Read More »
This Service Information Bulletin announces diagnostic service procedures to be followed when DTC P0420 (Catalyst System Efficiency Below Threshold Bank 1) is detected by the Engine Control Module (ECM). Read More »
This bulletin provides updated parts information and a service procedure to follow for removing accumulated carbon deposits from fuel injectors and internal engine components. Read More »
This bulletin provides updated parts information and a service procedure to follow for removing accumulated carbon deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers). Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 model year Crosstrek vehicles to check and, if necessary, update the ECM programming, and to replace all four ignition coils in each vehicle. Read More »
This bulletin provides a new flow chart and additional diagnostic tools to assist technicians with troubleshooting DTC P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE. Read More »
This bulletin provides updated parts information and a service procedure to follow for removing accumulated carbon deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers). Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 model year Crosstrek vehicles to check and, if necessary, update the ECM programming, and to replace all four ignition coils in each vehicle. Read More »
This bulletin announces availability of new starter motors and ECM reprogramming files created to address some reports of excessive noise while cranking the engine. Read More »
This bulletin announces the availability of ECM reprograming files to correct a possible limited power and/or hesitation during acceleration at engine speeds of 1500-3500 rpm. Read More »
This bulletin announces the availability of ECM reprograming files to correct a possible lack of power and/or hesitation during acceleration at engine speeds of 1500-3500 rpm. Read More »
This bulletin provides updated parts information and a service procedure to follow for removing accumulated carbon deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers). Read More »
This bulletin provides updated parts information and a service procedure to follow for removing accumulated carbon deposits from fuel injectors and internal engine components. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 model year Crosstrek vehicles to check and, if necessary, update the ECM programming, and to replace all four ignition coils in each vehicle. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 model year Crosstrek vehicles to check and, if necessary, update the ECM programming, and to replace all four ignition coils in each vehicle. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 model year Crosstrek vehicles to check and/or update the ECM programming, and to replace all four ignition coils in each vehicle. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 model year Crosstrek vehicles to check and/or update the ECM programming, and to replace all four ignition coils in each vehicle. Read More »
This bulletin provides a revised service procedure to follow when repairing minor coolant seepage identified to be coming from the air plug at the top of the radiator. Read More »
This bulletin announces availability of new intake manifold assemblies which include enhanced TGV assemblies to address related DTCs which may set as a result of lubricant contained within the actuator component of the TGV leaking and ... Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-20109 Crosstrek vehicles due to improper Engine Control Module (ECM) programming. Read More »
This Service Information Bulletin announces part number change information for the Positive Crankcase Ventilation (PCV) valves used on the models listed above. Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2017-2018 model year Impreza vehicles and certain 2018 model year Crosstrek vehicles in which the Positive Crankcase Ventilation (PCV) valve may be defective. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 Crosstrek vehicles due to improper Engine Control Module (ECM) programming. A total of 466,205 U.S. vehicles will be affected by this recall. Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2017-2018 model year Impreza vehicles and certain 2018 model year Crosstrek vehicles in which the Positive Crankcase Ventilation (PCV) valve may be defective. Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2017-2018 model year Impreza vehicles and certain 2018 model year Crosstrek vehicles in which the Positive Crankcase Ventilation (PCV) valve may be defective. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 Crosstrek vehicles due to improper Engine Control Module (ECM) programming. A total of 466,205 U.S. vehicles will be affected by this recall. Read More »
Subaru f America, Inc. (Subaru) is initiating a new safety recall for certain 2017-2018 model year Impreza vehicles and certain 2018 model year Crosstrek vehicles in which the Positive Crankcase Ventilation (PCV) valve may be defective. Read More »
This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. Read More »
This bulletin announces a design change to the PCV valve used on the models listed above. Customers may have concerns of white smoke from the exhaust and / or in some cases, excessive engine oil consumption. Read More »
This Service Information bulletin announces a design change to the upper oil pan baffle plate used on the models listed above. The new plate has a relief to allow for use of an oil level sensor which will be used in future production. Read More »
This bulletin announces a design change to the PCV valve used on the models listed above. Customers may have concerns of white smoke from the exhaust and / or in some cases, excessive engine oil consumption. Read More »
This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. Read More »
Effective with all 2015 model year cars and forward, the oil change interval is changing to 6,000 miles or 6 months, whichever comes first. Read More »
ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:SUMP/TANK:DRAIN PLUG
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 model year Crosstrek vehicles to check and, if necessary, update the ECM programming, and to replace all four ignition coils in each vehicle. Read More »
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL
This bulletin announces the availability of reprogramming files to optimize the Engine Control Module (ECM) for hard starting in sub-freezing temperatures, DTC P0400, and surging in high altitudes. Read More »
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2017-2018 model year Impreza vehicles and certain 2018 model year Crosstrek vehicles in which the Positive Crankcase Ventilation (PCV) valve may be defective. Read More »
Subaru f America, Inc. (Subaru) is initiating a new safety recall for certain 2017-2018 model year Impreza vehicles and certain 2018 model year Crosstrek vehicles in which the Positive Crankcase Ventilation (PCV) valve may be defective. Read More »
This Service Information bulletin announces a change to the required thread sealer used when installing the PCV valve into the engine block. Read More »
This bulletin announces a design change to the PCV valve used on the models listed above. Customers may have concerns of white smoke from the exhaust and / or in some cases, excessive engine oil consumption. Read More »
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR
This Service Information Bulletin announces diagnostic service procedures to be followed when DTC P0420 (Catalyst System Efficiency Below Threshold Bank 1) is detected by the Engine Control Module (ECM). Read More »
This bulletin provides updated parts information and a service procedure to follow for removing accumulated carbon deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers). Read More »
This bulletin announces design changes made to the fuel injector assembly in response to misfire DTC P030x, engine knocking, and/or DTCs P219C-D-E-F. Read More »
This bulletin provides updated parts information and a service procedure to follow for removing accumulated carbon deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers). Read More »
This bulletin provides updated parts information and a service procedure to follow for removing accumulated carbon deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers). Read More »
This bulletin provides a service procedure to address a small number of concerns regarding a rattle/ buzz-type sound coming from the fuel tank area. Read More »
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
This Service Information Bulletin provides updated diagnostic procedures to follow and a brief questionnaire to complete when diagnosing an alleged Chain Slip condition on the TR580 and TR690 model CVT transmissions used in the models ... Read More »
This Bulletin provides updated diagnostic procedures to follow and a brief questionnaire to complete when diagnosing an alleged Chain Slip condition on the TR580 and TR690 model CVT transmissions used in the models listed. Read More »
This Service Information Bulletin provides an updated diagnostic flow along with an IMPORTANT caution to follow for certain CVT solenoid related DTCs as listed. Read More »
This Service Information Bulletin provides updated diagnostic procedures to follow and a brief questionnaire to complete when diagnosing an alleged Chain Slip condition on the TR580 and TR690 model CVT transmissions used in the models ... Read More »
This Bulletin provides updated diagnostic procedures to follow and a brief questionnaire to complete when diagnosing an alleged Chain Slip condition on the TR580 and TR690 model CVT transmissions used in the models listed. Read More »
The bulletin announces the design change made the propeller shaft to address the small number of customer concerns regarding a growling-type sound being heard from under the vehicle when driving. Read More »
This Bulletin provides updated diagnostic procedures to follow and a brief questionnaire to complete when diagnosing an alleged Chain Slip condition on the TR580 and TR690 model CVT transmissions used in the models listed. Read More »
This bulletin announces a design change to the CVT select lever mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
This bulletin provides updated diagnostic procedures to follow and a brief questionnaire to complete when diagnosing an alleged Chain Slip condition on the TR580 and TR690 model CVT transmissions. Read More »
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Read More »
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
(Owner Letter) As part of Subaru of Americaa??s dedication to customer satisfaction, this letter is to inform you of an extension to the Basic New Car Limited Warranty for your vehiclea??s CVT Parking Brake Switch. Read More »
Vehicles equipped with manual transmission and push-button start will follow DCM replacement procedure as outlined in TSB 15-279-21: Gen1 Telematics DCM Replacement for 3G Sunset which is applicable to manual transmission vehicles with ... Read More »
This Service Information Bulletin provides updated diagnostic procedures to follow and a brief questionnaire to complete when diagnosing an alleged Chain Slip condition on the TR580 and TR690 model CVT transmissions. Read More »
This bulletin provides updated diagnostic procedures to follow and a brief questionnaire to complete when diagnosing an alleged chain slip condition on the TR580 and TR690 model CVT transmissions. Read More »
This Service Information Bulletin provides updated diagnostic procedures to follow when diagnosing an alleged Chain Slip condition on the TR580 and TR690 model CVT transmissions. Read More »
This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Read More »
This bulletin announces availability of new shift forks and the corresponding sleeve and hub assembly to address isolated customer concerns of a rattling / vibration -type sound from the shift knob. Read More »
This bulletin announces a design change to the leather transmission selector lever grip. The change will address a small number of concerns regarding stickiness and / or roughness felt on a portion (Panel A shown in the illustration ... Read More »
This Service Information Bulletin outlines design changes made to the coolant hoses for the CVT fluid cooler and the spring-type clamps used to secure them. Read More »
This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Read More »
"This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Read More »
This bulletin provides a procedure for addressing a limited number of concerns involving a tapping-type sound originating from the area where the engine and CVT are joined. Read More »
This bulletin provides a procedure for addressing a limited number of concerns involving a tapping -type sound originating from the area where the engine and CVT are joined. Read More »
This bulletin announces reprogramming file availability to optimize the Transmission Control Module (TCM) used with the TR580 CVT. Contamination in a fluid pressure solenoid valve can cause a DTC P0841. Read More »
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. Read More »
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. Read More »
This bulletin provides updated diagnostic procedures to follow and a brief questionnaire to complete when diagnosing an alleged Chain Slip condition on the TR580 and TR690 model CVT transmissions. Read More »
POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
This bulletin announces reprogramming file availability to optimize the Transmission Control Module (TCM) used with the TR580 CVT. Contamination in a fluid pressure solenoid valve can cause a DTC P0841. Read More »
Subaru of America, Inc. (SOA) is initiating a service program for certain 2017-2019 MY Impreza vehicles, and certain 2018-2019 MY Crosstrek vehicles. This service program involves installation of reprogramming files to optimize the ECM. Read More »
Subaru of America, Inc. has initiated a service program for certain 2017?2019 MY Impreza vehicles, and certain 2018?2019 MY Crosstrek vehicles. This service program involves installation of reprogramming files to optimize the ECM. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the Data Communication Module (DCM) Warranty from 3 years (36 months) of 36,000 miles to 8 years (96 months) or 100,000 miles, whichever comes first. Read More »
This bulletin announces repair procedures to be used when diagnosing dark current draw (parasitic draw) on vehicles equipped with Gen 1 Data Control Modules. Read More »
Subaru has extended the Data Communication Module (DCM) warranty from 3 years 36,000mi to 8 years or 100,000mi. In rare cases, customers may experience a dead battery as a result of the DCM continually trying to access the 3G network. Read More »
This announcement provides information in regard to the extension of the basic new car limited warranty for the Telematics Data Communication Module (DCM). Read More »
Subaru of America, Inc. (Subaru) is extending the Data Communication Module (DCM) warranty from three years (36 months or 36K miles) to eight years (96 months or 100K miles), whichever comes first. Read More »
This bulletin provides procedures required for reprogramming the Data Communication Module (DCM) in Gen 1 Subaru vehicles due to sunsetting of the 3G network. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units utilized in the models as listed. Read More »
This Bulletin announces additional information regarding error codes 1403- 1407 encountered when attempting an adjustment/calibration of the EyeSightA? system after body repair procedures have been performed. Read More »
This bulletin announces the repair procedures when corrosion is encountered within the instrument panel wiring harness and the rear wiring harness connectors. Read More »
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressing customer concerns. Read More »
This Service Information Bulletin provides updated diagnostic procedures to follow and a brief questionnaire to complete when diagnosing an alleged Chain Slip condition on the TR580 and TR690 model CVT transmissions used in the models ... Read More »
This bulletin announces repair procedures to be used when diagnosing dark current draw (parasitic draw) on vehicles equipped with Gen 1 Data Control Modules. Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressing customer concerns. Read More »
This Service Information Bulletin provides an updated diagnostic flow along with an IMPORTANT caution to follow for certain CVT solenoid related DTCs as listed. Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressin customer concerns. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 model year Crosstrek vehicles to check and, if necessary, update the ECM programming, and to replace all four ignition coils in each vehicle. Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units utilized in the models as listed. Read More »
This Bulletin announces the preferred practices to be used when handling vehicles equipped with Gen2 Telematics which are enrolled in the Subaru STARLINKA? Security Plus Service featuring Stolen Vehicle Recovery Plus with Immobilizer. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units utilized in the models as listed. Read More »
This bulletin announces a design change to the CVT select lever mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units. Read More »
This bulletin has been developed to outline the steps for gathering basic essential information during diagnosis and repair of the Infotainment concerns. (Applicable to all models with Harman or Denso CP1 Infotainment). Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressing customer concerns. Read More »
This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Read More »
This bulletin announces design changes made to the fuel injector assembly in response to misfire DTC P030x, engine knocking, and/or DTCs P219C-D-E-F. Read More »
This bulletin provides important information regarding diagnosis and replacement (when applicable) of the STARLINK Telematics Data Communication Module (DCM) along with a new claim submission requirement. Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressing customer concerns. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 model year Crosstrek vehicles to check and, if necessary, update the ECM programming, and to replace all four ignition coils in each vehicle. Read More »
This bulletin announces availability of new starter motors and ECM reprogramming files created to address some reports of excessive noise while cranking the engine. Read More »
This bulletin announces the availability of ECM reprograming files to correct a possible limited power and/or hesitation during acceleration at engine speeds of 1500-3500 rpm. Read More »
This bulletin announces the availability of ECM reprograming files to correct a possible lack of power and/or hesitation during acceleration at engine speeds of 1500-3500 rpm. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a service program to update the Harman Kardon head unit on certain vehicles with the latest version of software. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units utilized in the models as listed. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 model year Crosstrek vehicles to check and/or update the ECM programming, and to replace all four ignition coils in each vehicle. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 model year Crosstrek vehicles to check and, if necessary, update the ECM programming, and to replace all four ignition coils in each vehicle. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 model year Crosstrek vehicles to check and/or update the ECM programming, and to replace all four ignition coils in each vehicle. Read More »
Vehicles equipped with manual transmission and push-button start will follow DCM replacement procedure as outlined in TSB 15-279-21: Gen1 Telematics DCM Replacement for 3G Sunset which is applicable to manual transmission vehicles with ... Read More »
This bulletin provides helpful information about operating conditions observed in the field for Technicians to use when diagnosing customer concerns which may arise while operating Harman Gen 3 Navigation and Display Audio systems. Read More »
This bulletin provides information related to the telematics system's Automatic Collision Notification (ACN) and Advanced Automatic Collision Notification (AACN) feature operation, diagnostic tips, and best practices. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units. Read More »
This bulletin announces availability of new A/C compressor assemblies designed to address customer concerns of reduced system performance accompanied by a rattling and/or scraping type sound. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3.1 Audio and Navigation head units utilized in the models as listed. Read More »
This service information bulletin announces discontinuation of both the "Stitcher" app and the related News Radio feature from the STARLINK app lineup effective 12 midnight on Thursday, September 24, 2020. Read More »
IMPORTANT: This Service Information Bulletin has been removed following Software Version 6 release to the field. Please refer to TSb 15-211-17R for Gen 3.0 and TSB 15-236-18R for Gen 3.1 the update on this condition. Read More »
This document discusses some of the conditions that may trigger an Automatic Collision Notification (CAN) (Gen1) or Advanced Automatic Collision Notification (AACN) (Gen2), without a collision, airbag deployment, or accident taking place. Read More »
This Service Information Bulletin provides helpful procedures and best practices to utilize when customers present with concerns relating to the operation of their Gen 2 Telematics system equipped Subaru. Read More »
This Service Information bulletin provides IMPORTANT information regarding diagnosis and replacement (when applicable) of the STARLINK Telematics Data Communication Module (DMC). Read More »
This bulletin provides a new reprogramming procedure (FOTA) to optimize the Harman Gen 3.0 Audio and Navigation head units (H/U) utilized in the models listed. Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressing customer concerns. Read More »
This bulletin announces a design change made to the Slide Rail components of the left and right front power seat frame / track assemblies used on the models listed. Read More »
This service information bulletin provides important information regarding diagnosis and replacement (when applicable) of the STARLINK Telematics Data Communication Module (DCM). All models with STARLINK Telematics System. Read More »
In the intrest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Warranty for the listed models and model years equipped with a Harman Gen. 3.0 Audio and Navigation head unit. Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize effciency while addressing customer concerns. Read More »
This service bulletin provides details of a correction to the diagnostic procedure for DTC B2350- REAR RADAR COMMUNICATION ERROR on the models listed. Read More »
This Service Information Bulletin is in response to several battery sensor replacements resulting from improper removal and/or installation practices. Read More »
This Service Information bulletin informs of an upcoming correction to the Service Manual involving Gear Position shown in Freeze-Frame Data acquired during Engine diagnosis. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units utilized in the models as listed. Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. Read More »
This bulletin provides a new reprogramming procedure (FOTA) to optimize the Harman Gen 3 Audio and Navigation head units (H/U) utilized in the models Read More »
This announcement is in regards to the class action lawsuit regarding Harman Gen 3.0 Audio and Audio/ Navigation Head Units in certain Subaru vehicles. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 Crosstrek vehicles due to improper Engine Control Module (ECM) programming. A total of 466,205 U.S. vehicles will be affected by this recall. Read More »
This bulletin provides helpful information about operating conditions observed in the field for Technicians to use when diagnosing customer concerns which may arise while operating Harman Gen 3.0 and 3. Read More »
This bulletin provides troubleshooting steps to follow when diagnosing a customer concern of the display screen being either frozen (unresponsive) or black (blank). Read More »
This bulletin provides troubleshooting steps to use when diagnosing concerns of the Apple CarPlay and / or Android Auto feature not connecting or launching properly when a compatible device is connected to the head unit. Read More »
This Service Information bulletin provides a procedure to use for addressing a customer concern of a delayed or slow response when using the soft keys on the touch screen of the audio / navigation head unit. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a service program to update the Harman Kardon head unit on certain vehicles with the latest version of software. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 Crosstrek vehicles due to improper Engine Control Module (ECM) programming. A total of 466,205 U.S. vehicles will be affected by this recall. Read More »
This Service Information Bulletin provides the answer to potential inquiries regarding the STARLINK app being unable to play music files stored on a customera??s AndroidA? phone / device through the head units (H/U) used in the ... Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressing the following customer concerns: Symptom 1: No audio output is heard but, the ... Read More »
This bulletin provides a new reprogramming procedure (FOTA) to optimize the Harman Gen 3 Audio and Navigation head units (H/U) utilized in the models as listed above. Read More »
"This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2. Read More »
This Service Information Bulletin announces a design change to the ABS wheel speed sensor assemblies. The change optimizes moisture and corrosion resistance of the sensor harness casing. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a service program to update the Harman head unit on certain vehicles with the latest version of software. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressing the following customer concerns: Symptom 1: No audio output is heard but, the ... Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressing the following customer concerns: ? Loss of audio output after turning the head ... Read More »
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a service program to update the Harman Kardon head unit on certain vehicles with the latest version of software. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
This bulletin announces availability of new audio system amplifiers to address the following operating concerns with the Harman Kardon Gen 3 infotainment system: Symptom 1: No audio output is heard but, the volume level displayed changes ... Read More »
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
This bulletin provides troubleshooting steps to use when diagnosing concerns of the Apple CarPlay and / or Android Auto feature not connecting or launching properly when a compatible device is connected to the head unit. Read More »
This bulletin provides troubleshooting steps to follow when diagnosing a customer concern of the display screen being either frozen (unresponsive) or black (blank). Read More »
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
This bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed to set and result in the related system?s (e. g. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
This bulletin announces availability of new audio system amplifiers to address the following operating concerns with the Harman Kardon Gen 3 infotainment system: Symptom 1: No audio output is heard but, the volume level displayed ... Read More »
This bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s (e. g. Read More »
A design improvement has been made to the warning box assembly for improved responsiveness. The warning box is located inside the overhead map light assembly as shown in the illustrations below. Read More »
This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. Read More »
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
This bulletin announces a design change to the CVT select lever (shifter) mechanism in response to isolated customer concerns of not being able to remove the key from the ignition switch when the vehicle is in Park. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 model year Crosstrek vehicles to check and, if necessary, update the ECM programming, and to replace all four ignition coils in each vehicle. Read More »
Going forward when a customera??s vehicle is equipped with a DCM that does not have Software version ID DCM_06.00.17_20190816 installed and they wish to subscribe to Starlink Telematics Service, the DCM must be replaced. Read More »
In the interest of customer satisfation, Subaru of America, Inc. (Subaru) is initiating a service program to update the Harman Kardon head unit on certain vehicles with the latest version of software. Read More »
This bulletin announces the availability of reprogramming files to optimize the Engine Control Module (ECM) for hard starting in sub-freezing temperatures, DTC P0400, and surging in high altitudes. Read More »
In efforts to increase customer satisfaction, Subaru of America, Inc. is now allowing all retailers to perform a one-time update the head unit software for Harman Gen 3 Audio and Navigation Head Units. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a service program to update the Harman Kardon head unit on certain vehicles with the latest version of software. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
This bulletin provides troubleshooting steps to use when diagnosing concerns of the Apple CarPlay and/or Android Auto feature not connecting or launching properly when a compatible device is connected to the head unit. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
Subaru of America, Inc. has initiated a service program for certain 2017?2019 MY Impreza vehicles, and certain 2018?2019 MY Crosstrek vehicles. This service program involves installation of reprogramming files to optimize the ECM. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
This bulletin announces a design change made to the fog light cover claws to improve their retention. The height of all 5 retaining claws has been increased by .5 mm as shown in the illustration below. Read More »
This Service Information bulletin announces a change made to the lens portion of the fog light assembly. The new lens has optimized light distribution characteristics while remaining interchangeable with the original type. Read More »
This bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s (e. g. Read More »
This Service Information bulletin announces a change made to the lens portion of the fog light assembly. The new lens has optimized light distribution characteristics while remaining interchangeable with the original type. Read More »
This bulletin announces a design change made to the windshield side cowl panels to address isolated concerns of a buzzing / rattle-type sound heard while driving. Read More »
This bulletin announces a design change made to the outside mirrors to address a very limited number of customer concerns regarding a rattling-type sound which may be heard when shutting the front doors. Read More »
This Service Information Bulletin announces a design change made to the side curtain and knee airbag modules on the models listed above to optimize commonization with the Japanese production parts. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2019 model year Forester and 2018-2019 model year Crosstrek vehicles to inspect and, if necessary, correct the condition of the rear stabilizer bracket bolts. Read More »
This bulletin announces a design change made to the windshield side cowl panels to address isolated concerns of a buzzing / rattle-type sound heard while driving. Read More »
This bulletin announces design changes made to the rear quarter glass assembly in response to a small number of reports describing a rattling - type sound origination from the lower molding. Read More »
This Service Information Bulletin outlines design changes made to the rear frame sections and the mounting bolts used to secure the rear stabilizer bar brackets to them. Read More »
This bulletin announces a design change made to the hood stay support. This change will prevent vibration sounds resulting from contact with adjacent under-hood components. Read More »
This Service Information Bulletin announces a change made to the rear subframe retaining bolts used on the models listed above. The design changes provide the bolt with an increased durability against rust. Read More »
This bulletin announces a change to the interior door trim panels made to address a limited number of concerns regarding small dents appearing in the accent areas as shown in the illustrations below. Read More »
This Service Information bulletin provides supplemental instructions to follow when repairing chipping and / or peeling-type damage to the Sunshine Orange (Code AK) colored paint finish. Read More »
This Service Information bulletin provides supplemental instructions to follow when repairing chipping and / or peeling-type damage to the Sunshine Orange (Code AK) colored paint finish. Read More »
This bulletin provides a procedure and precautions to use when addressing a customer concern of an improper fit or gap condition of the center vent grille assembly as shown in the comparison photos below. Read More »
This bulletin announces a design change to the front and rear door body flange weatherstrips in response to concerns regarding the doors being somewhat difficult to close fully. Read More »
This bulletin provides a procedure to address customer concerns of surface rust accumulating in the top center retaining nut area of the front strut mounts. Read More »
This bulletin announces a design change to the front and rear door body flange weatherstrips in response to concerns regarding the doors being somewhat difficult to close fully. Read More »
This Service Information Bulletin outlines design changes made to the rear frame section weld nuts and the mounting bolts used to secure the rear stabilizer bar brackets. Read More »
This Service Information Bulletin outlines design changes made to the rear frame section weld nuts and the mounting bolts used to secure the rear stabilizer bar brackets to them. Read More »
This bulletin provides a procedure and precautions to use when addressing a customer concern of an improper fit or gap condition of the center vent grille assembly as shown in the comparison photos below. Read More »
This bulletin announces a design change to the front and rear door body flange weatherstrips in response to concerns regarding the doors being somewhat difficult to close fully. Read More »
This bulletin describes a design change made to the exterior a??Aa?? pillar cover. The change involves use of materials in critical areas having added rigidity along with an extra strengthening rib. Read More »
This bulletin announces a change to the interior door trim panels made to address a limited number of concerns regarding small dents appearing in the accent areas as shown in the illustrations below. Read More »
This bulletin announces a design change to the front and rear door body flange weatherstrips in response to concerns regarding the doors being somewhat difficult to close fully. Read More »
5 DOOR MODELS ONLY. This Service Information bulletin announces a design change to the rear gate trim panels. The change was made to the areas of the panels where they fit together to improve production line efficiency. Read More »
This bulletin announces a design change to the front and rear door body flange weatherstrips in response to concerns regarding the doors being somewhat difficult to close fully. Read More »
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
This Service Information bulletin provides details about revised CVT select lever (shifter) components. The shape of the lock plate and output of the shift lock solenoid have been changed. Read More »
"This bulletin announces availability of reprogramming files to optimize operation of the Tire Pressure Monitor Systema??s (TPMS) real-time display function. Read More »
This bulletin announces availability of reprogramming files to optimize operation of the Tire Pressure Monitor System?s (TPMS) real-time display function. Read More »
This bulletin announces availability of new front wheel hub assemblies incorporating bearing surfaces having increased resistance to imperfections resulting from shock loads. Read More »
This bulletin announces a design change made to the rear wheel / brake backing plates. Under certain circumstances, some customers may have a concern regarding a howling-type sound from the rear of the vehicle later diagnosed as a ... Read More »
This bulletin outlines changes made to the rear quarter panel wheel arch garnish to eliminate gapping between the inner edge of the trim and the vehicle body. Read More »
This bulletin announces availability of new front wheel hub assemblies incorporating bearing surfaces having increased resistance to imperfections resulting from shock loads. Read More »
This bulletin announces a design change made to the Slide Rail components of the left and right front power seat frame / track assembliesd. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides a repair procedure to address a squeaking sound coming from the backrest hinge area of the front seats. The procedure applies to both manually and power operated seat assemblies. Read More »
This bulletin announces a design change made to the front seat backrest frame assemblies in response to a limited number of customer reports of a squeaking sound heard when leaning back in the front seats. Read More »
This bulletin announces a design change made to the Slide Rail components of the left and right front power seat frame / track assemblies used on the models listed. Read More »
This Bulletin announces additional information regarding error codes 1403- 1407 encountered when attempting an adjustment/calibration of the EyeSightA? system after body repair procedures have been performed. Read More »
This document discusses some of the conditions that may trigger an Automatic Collision Notification (CAN) (Gen1) or Advanced Automatic Collision Notification (AACN) (Gen2), without a collision, airbag deployment, or accident taking place. Read More »
This Bulletin announces the preferred practices to be used when handling vehicles equipped with Gen2 Telematics which are enrolled in the Subaru STARLINKA? Security Plus Service featuring Stolen Vehicle Recovery Plus with Immobilizer. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the Data Communication Module (DCM) Warranty from 3 years (36 months) of 36,000 miles to 8 years (96 months) or 100,000 miles, whichever comes first. Read More »
This bulletin announces repair procedures to be used when diagnosing dark current draw (parasitic draw) on vehicles equipped with Gen 1 Data Control Modules. Read More »
This bulletin announces the design change made to the cowl panel. The change was made to address a small number of cases where the rubber sealing portion becomes separated. Read More »
Subaru has extended the Data Communication Module (DCM) warranty from 3 years 36,000mi to 8 years or 100,000mi. In rare cases, customers may experience a dead battery as a result of the DCM continually trying to access the 3G network. Read More »
This announcement provides information in regard to the extension of the basic new car limited warranty for the Telematics Data Communication Module (DCM). Read More »
Subaru of America, Inc. (Subaru) is extending the Data Communication Module (DCM) warranty from three years (36 months or 36K miles) to eight years (96 months or 100K miles), whichever comes first. Read More »
This bulletin provides procedures required for reprogramming the Data Communication Module (DCM) in Gen 1 Subaru vehicles due to sunsetting of the 3G network. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units utilized in the models as listed. Read More »
This Service Information Bulletin announces diagnostic service procedures to be followed when DTC P0420 (Catalyst System Efficiency Below Threshold Bank 1) is detected by the Engine Control Module (ECM). Read More »
This Service Information Bulletin announces diagnostic service procedures to be followed when DTC P0420 (Catalyst System Efficiency Below Threshold Bank 1) is detected by the Engine Control Module (ECM). Read More »
This Bulletin announces additional information regarding error codes 1403- 1407 encountered when attempting an adjustment/calibration of the EyeSightA? system after body repair procedures have been performed. Read More »
This bulletin announces the repair procedures when corrosion is encountered within the instrument panel wiring harness and the rear wiring harness connectors. Read More »
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
This bulletin announces the recommended cleaning procedures to followed when encountering vehicles with long time exposure to pollen on painted surfaces on vehicles imported from Japan. This bulletin does not apply to SIA built vehicles. Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressing customer concerns. Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressin customer concerns. Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-2019 model year Crosstrek vehicles to check and, if necessary, update the ECM programming, and to replace all four ignition coils in each vehicle. Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units utilized in the models as listed. Read More »
This Bulletin provides updated diagnostic procedures to follow and a brief questionnaire to complete when diagnosing an alleged Chain Slip condition on the TR580 and TR690 model CVT transmissions used in the models listed. Read More »
This Bulletin announces the preferred practices to be used when handling vehicles equipped with Gen2 Telematics which are enrolled in the Subaru STARLINKA? Security Plus Service featuring Stolen Vehicle Recovery Plus with Immobilizer. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units utilized in the models as listed. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units. Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
This bulletin provides a new flow chart and additional diagnostic tools to assist technicians with troubleshooting DTC P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE. Read More »
(Owner Letter) As part of Subaru of Americaa??s dedication to customer satisfaction, this letter is to inform you of an extension to the Basic New Car Limited Warranty for your vehiclea??s CVT Parking Brake Switch. Read More »
This bulletin provides updated parts information and a service procedure to follow for removing accumulated carbon deposits from fuel injectors and internal engine components (e.g. intake valves and / or manifold, and combustion chambers). Read More »
This bulletin provides important information regarding diagnosis and replacement (when applicable) of the STARLINK Telematics Data Communication Module (DCM) along with a new claim submission requirement. Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressing customer concerns. Read More »
This bulletin provides a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
This bulletin announces a design change made to the windshield side cowl panels to address isolated concerns of a buzzing / rattle-type sound heard while driving. Read More »
This Service Information Bulletin provides updated diagnostic procedures to follow and a brief questionnaire to complete when diagnosing an alleged Chain Slip condition on the TR580 and TR690 model CVT transmissions. Read More »
This bulletin announces availability of new front wheel hub assemblies incorporating bearing surfaces having increased resistance to imperfections resulting from shock loads. Read More »
This bulletin provides helpful information about operating conditions observed in the field for Technicians to use when diagnosing customer concerns which may arise while operating Harman Gen 3 Navigation and Display Audio systems. Read More »
To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool. Read More »
This bulletin provides information related to the telematics system's Automatic Collision Notification (ACN) and Advanced Automatic Collision Notification (AACN) feature operation, diagnostic tips, and best practices. Read More »
This Service Information Bulletin provides updated diagnostic procedures to follow when diagnosing an alleged Chain Slip condition on the TR580 and TR690 model CVT transmissions. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides a repair procedure to address a squeaking sound coming from the backrest hinge area of the front seats. The procedure applies to both manually and power operated seat assemblies. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units. Read More »
This Service Information Bulletin outlines design changes made to the rear frame section weld nuts and the mounting bolts used to secure the rear stabilizer bar brackets. Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
This bulletin provides a revised service procedure to follow when repairing minor coolant seepage identified to be coming from the air plug at the top of the radiator. Read More »
This bulletin announces a design change made to the front seat backrest frame assemblies in response to a limited number of customer reports of a squeaking sound heard when leaning back in the front seats. Read More »
The purpose of this bulletin is to provide a desription of current changes to service manuals available via the Subaru Technical Information System (STIS) web site. Read More »
This bulletin announces availability of new intake manifold assemblies which include enhanced TGV assemblies to address related DTCs which may set as a result of lubricant contained within the actuator component of the TGV leaking and ... Read More »
This Service Information Bulletin provides helpful procedures and best practices to utilize when customers present with concerns relating to the operation of their Gen 2 Telematics system equipped Subaru. Read More »
This bulletin provides a new reprogramming procedure (FOTA) to optimize the Harman Gen 3.0 Audio and Navigation head units (H/U) utilized in the models listed. Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressing customer concerns. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This service information bulletin provides important information regarding diagnosis and replacement (when applicable) of the STARLINK Telematics Data Communication Module (DCM). All models with STARLINK Telematics System. Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize effciency while addressing customer concerns. Read More »
This service bulletin provides details of a correction to the diagnostic procedure for DTC B2350- REAR RADAR COMMUNICATION ERROR on the models listed. Read More »
This bulletin announces a design change made to the hood stay support. This change will prevent vibration sounds resulting from contact with adjacent under-hood components. Read More »
This Service Information bulletin informs of an upcoming correction to the Service Manual involving Gear Position shown in Freeze-Frame Data acquired during Engine diagnosis. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a service program to replace brake hoses that may swell due to fluid which can squeeze in between the hosea??s inner and outer layers. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a service program to replace brake hoses that may swell due to fluid which can squeeze in between the hosea??s inner and outer layers. Read More »
This bulletin provides troubleshooting steps to follow when diagnosing a customer concern of the display screen being either frozen (unresponsive) or black (blank). Read More »
This Service Information bulletin provides a procedure to use for addressing a customer concern of a delayed or slow response when using the soft keys on the touch screen of the audio / navigation head unit. Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2017-2018 model year Impreza vehicles and certain 2018 model year Crosstrek vehicles in which the Positive Crankcase Ventilation (PCV) valve may be defective. Read More »
In efforts to increase customer satisfaction, Subaru of America, Inc. is now allowing all retailers to perform a one-time update the head unit software for Harman Gen 3 Audio and Navigation Head Units. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a service program to update the Harman Kardon head unit on certain vehicles with the latest version of software. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
This Service Information bulletin provides supplemental instructions to follow when repairing chipping and / or peeling-type damage to the Sunshine Orange (Code AK) colored paint finish. Read More »
This bulletin provides helpful information about operating conditions observed in the field for Technicians to use when diagnosing customer concerns which may arise while operating Harman Gen 3.0 and 3. Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressing the following customer concerns: Symptom 1: No audio output is heard but, the ... Read More »
IMPORTANT: This Service Bulletin has been as been replaced by TSB 15-240-19R entitled ?New Harman Audio Amplifiers?. Please refer to this new bulletin for the latest information regarding this condition. Read More »
To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool. Read More »
This Service Information bulletin announces a design change made to the rubber timing hole access plug to improve its retention and prevent water intrusion into the converter case. Read More »
This Service Information bulletin provides supplemental instructions to follow when repairing chipping and / or peeling-type damage to the Sunshine Orange (Code AK) colored paint finish. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a service program to update the Harman Kardon head unit on certain vehicles with the latest version of software. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
This bulletin announces availability of new audio system amplifiers to address the following operating concerns with the Harman Kardon Gen 3 infotainment system: Symptom 1: No audio output is heard but, the volume level displayed changes ... Read More »
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2. Read More »
This Service Information bulletin provides details about revised CVT select lever (shifter) components. The shape of the lock plate and output of the shift lock solenoid have been changed. Read More »
This bulletin provides troubleshooting steps to follow when diagnosing a customer concern of the display screen being either frozen (unresponsive) or black (blank). Read More »
This bulletin provides troubleshooting steps to use when diagnosing concerns of the Apple CarPlay and / or Android Auto feature not connecting or launching properly when a compatible device is connected to the head unit. Read More »
This Service Information bulletin provides a procedure to use for addressing a customer concern of a delayed or slow response when using the soft keys on the touch screen of the audio / navigation head unit. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
This bulletin provides troubleshooting steps to follow when diagnosing a customer concern of the display screen being either frozen (unresponsive) or black (blank). Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
This bulletin announces new part number information for the antenna feeder cable and head liner. It also provides helpful installation tips for properly securing the cable to the head liner so post-repair rattling sound concerns are ... Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
This bulletin announces a design change to the PCV valve used on the models listed above. Customers may have concerns of white smoke from the exhaust and / or in some cases, excessive engine oil consumption. Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. Read More »
This bulletin announces a design change to the front and rear door body flange weatherstrips in response to concerns regarding the doors being somewhat difficult to close fully. Read More »
This bulletin announces a design change to the front and rear door body flange weatherstrips in response to concerns regarding the doors being somewhat difficult to close fully. Read More »
This bulletin announces availability of new audio system amplifiers to address the following operating concerns with the Harman Kardon Gen 3 infotainment system: Symptom 1: No audio output is heard but, the volume level displayed ... Read More »
This bulletin announces availability of new audio system amplifiers to address the following operating concerns with the Harman Kardon Gen 3 infotainment system: Symptom 1: No audio output is heard but, the volume level displayed ... Read More »
Post launch conditions may occur where certain combinations of inputs result in undesirable outputs. As such it is critical to gather all the details surrounding these events to allow SBR and Harman the ability to duplicate and then ... Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. Read More »
The content of this ?Technical Support Guide? is based mostly on the respective region?s owner?s manual supplements for the Gen3.0 infotainment (HARMAN model Navigation/Audio) system. Read More »
Note: This is the most accurate information available at the time of printing. Various paint manufacturers designate their own stock numbers and coding information although many of the major suppliers are now using the SOA paint codes ... Read More »
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 model year Impreza and 2018-20109 Crosstrek vehicles due to improper Engine Control Module (ECM) programming. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a service program to update the Harman head unit on certain vehicles with the latest version of software. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a service program to update the Harman Kardon head unit on certain vehicles with the latest version of software. Read More »
This bulletin announces availability of new audio system amplifiers to address the following operating concerns with the Harman Kardon Gen 3 infotainment system: Symptom 1: No audio output is heard but, the volume level displayed changes ... Read More »
This bulletin provides troubleshooting steps to use when diagnosing concerns of the Apple CarPlay and/or Android Auto feature not connecting or launching properly when a compatible device is connected to the head unit. Read More »
This bulletin provides troubleshooting steps to use when diagnosing concerns of the Apple CarPlay and/or Android Auto feature not connecting or launching properly when a compatible device is connected to the head unit. Read More »
This bulletin provides troubleshooting steps to follow when diagnosing a customer concern of the display screen being either frozen (unresponsive) or black (blank). Read More »
This bulletin provides troubleshooting steps to use when diagnosing concerns of the Apple CarPlay and / or Android Auto feature not connecting or launching properly when a compatible device is connected to the head unit. Read More »
This Service Information bulletin provides a procedure to use for addressing a customer concern of a delayed or slow response when using the soft keys on the touch screen of the audio / navigation head unit. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
This bulletin provides troubleshooting steps to follow when diagnosing a customer concern of the display screen being either frozen (unresponsive) or black (blank). Read More »
This Service Information bulletin provides a new troubleshooting chart to use when diagnosing a DTC B1760 related to the Occupant Detection System (ODS). Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressing customer concerns. Read More »
This bulletin provides helpful information about operating conditions observed in the field for Technicians to use when diagnosing customer concerns which may arise while operating Harman Gen 3.0 and 3. Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressing the following customer concerns: Symptom 1: No audio output is heard but, the ... Read More »
In efforts to increase customer satisfaction, Subaru of America, Inc. is now allowing all retailers to perform a one-time update the head unit software for Harman Gen 3 Audio and Navigation Head Units. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
This bulletin provides troubleshooting steps to follow when diagnosing a customer concern of the display screen being either frozen (unresponsive) or black (blank). Read More »
This Service Information bulletin is in response to a small number of customer concerns regarding the audio unit not being able to play certain types of audio Compact Discs (CDs). Harman Gen 3. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized. Read More »
2018 Audio/Navigation Exchange Component Identification and Procedures. This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. Read More »
This Service Information bulletin provides troubleshooting steps to use when diagnosing concerns of the Apple CarPlay and / or Android Auto feature not connecting or launching properly when a compatible device is connected to the head ... Read More »
This bulletin announces availability of new audio system amplifiers to address the following operating concerns with the Harman Kardon Gen 3 infotainment system: Symptom 1: No audio output is heard but, the volume level displayed ... Read More »
The content of this ?Technical Support Guide? is based mostly on the respective region?s owner?s manual supplements for the Gen3.0 infotainment (HARMAN model Navigation/Audio) system. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units. Read More »
In efforts to increase customer satisfaction, Subaru of America, Inc. is now allowing all retailers to perform a one-time update the head unit software for Harman Gen 3 Audio and Navigation Head Units. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
This bulletin provides helpful information about operating conditions observed in the field for Technicians to use when diagnosing customer concerns which may arise while operating Harman Gen 3.0 and 3. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized. Read More »
2018 Audio/Navigation Exchange Component Identification and Procedures. This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
Post launch conditions may occur where certain combinations of inputs result in undesirable outputs. As such it is critical to gather all the details surrounding these events to allow SBR and Harman the ability to duplicate and then ... Read More »
The content of this ?Technical Support Guide? is based mostly on the respective region?s owner?s manual supplements for the Gen3.0 infotainment (HARMAN model Navigation/Audio) system. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
This bulletin announces a design change made to the Slide Rail components of the left and right front power seat frame / track assemblies used on the models listed. Read More »
This bulletin provides updated diagnostic procedures to follow and a brief questionnaire to complete when diagnosing an alleged Chain Slip condition on the TR580 and TR690 model CVT transmissions. Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
This service bulletin provides details of a correction to the diagnostic procedure for DTC B2350- REAR RADAR COMMUNICATION ERROR on the models listed. Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. Read More »
This bulletin provides troubleshooting steps to use when diagnosing concerns of the Apple CarPlay and / or Android Auto feature not connecting or launching properly when a compatible device is connected to the head unit. Read More »
This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3 Audio and Navigation head units utilized in the models as listed above. Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
50TH ANNIVERSARY EDITIONS ONLY. This Service Information bulletin provides detailed part information along with installation instructions for the optional 2018MY 50th Anniversary badges designed to commemorate 50 Years of Subaru in ... Read More »
Post launch conditions may occur where certain combinations of inputs result in undesirable outputs. As such it is critical to gather all the details surrounding these events to allow SBR and Harman the ability to duplicate and then ... Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. Read More »
This Bulletin provides updated diagnostic procedures to follow and a brief questionnaire to complete when diagnosing an alleged Chain Slip condition on the TR580 and TR690 model CVT transmissions used in the models listed. Read More »
This Bulletin announces the preferred practices to be used when handling vehicles equipped with Gen2 Telematics which are enrolled in the Subaru STARLINKA? Security Plus Service featuring Stolen Vehicle Recovery Plus with Immobilizer. Read More »
This Service Information Bulletin provides updated diagnostic procedures to follow and a brief questionnaire to complete when diagnosing an alleged Chain Slip condition on the TR580 and TR690 model CVT transmissions. Read More »
This bulletin announces availability of new front wheel hub assemblies incorporating bearing surfaces having increased resistance to imperfections resulting from shock loads. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides a repair procedure to address a squeaking sound coming from the backrest hinge area of the front seats. The procedure applies to both manually and power operated seat assemblies. Read More »
This Service Information Bulletin outlines design changes made to the rear frame section weld nuts and the mounting bolts used to secure the rear stabilizer bar brackets. Read More »
This bulletin announces a design change made to the front seat backrest frame assemblies in response to a limited number of customer reports of a squeaking sound heard when leaning back in the front seats. Read More »
This bulletin announces availability of new intake manifold assemblies which include enhanced TGV assemblies to address related DTCs which may set as a result of lubricant contained within the actuator component of the TGV leaking and ... Read More »
This bulletin announces availability of new Harman audio unit amplifier units with revised internal logic designed to optimize efficiency while addressing customer concerns. Read More »
This Service Information Bulletin announces part number change information for the Positive Crankcase Ventilation (PCV) valves used on the models listed above. Read More »
This bulletin provides a new reprogramming procedure (FOTA) to optimize the Harman Gen 3 Audio and Navigation head units (H/U) utilized in the models Read More »
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the Harman Gen 3 Audio and Navigation head units. Read More »
This bulletin provides troubleshooting steps to follow when diagnosing a customer concern of the display screen being either frozen (unresponsive) or black (blank). Read More »
This Service Information bulletin provides a procedure to use for addressing a customer concern of a delayed or slow response when using the soft keys on the touch screen of the audio / navigation head unit. Read More »
This bulletin provides troubleshooting steps to follow when diagnosing a customer concern of the display screen being either frozen (unresponsive) or black (blank). Read More »
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. Read More »
This Service Information bulletin announces a design change to the clutch release bearing used on the models as listed above. During assembly of the bearing, a different type of grease is used which has a higher resistance to heat. Read More »
This bulletin provides troubleshooting steps to follow when diagnosing a customer concern of the display screen being either frozen (unresponsive) or black (blank). Read More »
Impreza 5-door models only. This Service Information bulletin serves as a reminder to always make sure the rear cargo cover (a.k.a. Tonneau Cover) is re-installed properly after removal. Read More »
This bulletin announces a design change to the front and rear door body flange weatherstrips in response to concerns regarding the doors being somewhat difficult to close fully. Read More »
This bulletin announces a design change to the front and rear door body flange weatherstrips in response to concerns regarding the doors being somewhat difficult to close fully. Read More »
This bulletin announces availability of new A/C compressor assemblies designed to address customer concerns of reduced system performance accompanied by a rattling and/or scraping type sound. Read More »
Subaru of America, Inc. (SOA) is initiating a service program for certain 2017-2019 MY Impreza vehicles, and certain 2018-2019 MY Crosstrek vehicles. This service program involves installation of reprogramming files to optimize the ECM. Read More »
Subaru of America, Inc. (SOA) is initiating a service program for certain 2017-2019 MY Impreza vehicles, and certain 2018-2019 MY Crosstrek vehicles. This service program involves installation of reprogramming files to optimize the ECM. Read More »
