Technical Service Bulletins (TSBs) for the 2024 GLC300 are official communications between Mercedes-Benz & their dealerships that describe processes for troubleshooting or fixing certain common problems.
All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
The steering wheel generates grinding noises between the steering wheel and steering column switch module during steering maneuvers See example file in the attachments area: Lenkrad-Schleifger??A?usch_SteeringWheel-GrindingNoises. Read More »
Control unit N68 - electric power steering Fault P063544 - The electric power steering has a malfunction. There is a fault in the data memory. Read More »
Wheezing noises from the front shock absorbers when passing over surface undulations and rough road. The noises may become more conspicuous with warm damper oil. The flow noises of the damper oil are currently being analyzed. Read More »
Wheezing noises from the front shock absorbers when passing over surface undulations and rough road. The noises may become more conspicuous with warm damper oil. The flow noises of the damper oil are currently being analyzed. Read More »
Check engine lamp activated, coolant warning message, and engine fan running at full speed. Below fault codes stored in N127 PTCU related to LIN network components. Read More »
This is to notify you of the Service Campaign OTA update for the MBUX system software in 750,313 Model Year (MY) MY19-24 A-Class, CLA, CLS, E-Class, EQB, GLA, GLB, GLC, GLE, GLS, GT 4-door (177, 118, 257, 213, 238, 243, 247, 253,167, 290 ... Read More »
The update of the RAMSES 1.1 module to the SW version E139.4 results in a fault in the vtime of the module and therefore to the following possible connection problems: Remote status: The time stamp of the last update that is displayed ... Read More »
TEMPORARY DEACTIVATION OF CAMPAIGN DUE TO DIFFICULTY WITH THE SOFTWARE UPLOAD. AN UPDATED NCU WITH WORK INSTRUCTIONS WILL BE PROVIDED ONCE AVAILABLE. The vehicles were visible and flagged in VMI as "OPEN" on March 28, 2024. Read More »
Mercedes-Benz AG, the manufacturer of Mercedes-Benz, has determined that on certain MY 2024 C-Class, GLC, and S-Class (206, 223, 254 platform) vehicles, the electronic ignition lock control unit software does not meet current production ... Read More »
The following symptoms may be present in the instrument cluster: 1. "Perform vehicle handover" in the workshop menu to start the maintenance computer for service A/B cannot be carried out. 2. Read More »
Mercedes-Benz AG (??A???A???A?MBAG??A???A???A?), the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY 21-24 C-Class, EQE, EQS, GLC, GLE, GLS, S-Class, SL (206, 294, 295, 296, 297, 254, 167, 223, 232 platform) ... Read More »
Complaint Updating the RAMSES 1.1 module to the latest SW-version E139.4 will lead to an error in the modules vtime and therefore the following possible connectivity issues: Remote Status: ??A?A? The last updated timestamp shown in ... Read More »
Mercedes-Benz AG (??A?A?MBAG??A?A?), the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY 2021-2023 C-Class, EQE, EQS, GLC, S-Class, and SL (206, 294, 295, 296, 297, 254, 223, and 232 platform) vehicles, there is ... Read More »
No audio is output either in radio mode, or with media playback via app, Bluetooth or USB. In such cases, "Playback not active" is shown in the display. Mute line between communication module N112/2 and sound control unit N40/3. Read More »
12V message in IC when starting the vehicle. SW updates need to be performed. Follow the guided test for FC U116000 in N73/3*1 EIS CU. Perform the SW checks and updates. Fully charge both 12V and 48V batteries. Read More »
Complaint Updating the RAMSES 1.1 module to the latest SW-version E139.4 will lead to an error in the modules vtime and therefore the following possible connectivity issues: Remote Status: ??A?A? The last updated timestamp shown in ... Read More »
The following symptoms may be present in the instrument cluster: 1. "Perform vehicle handover" in the workshop menu to start the maintenance computer for service A/B cannot be carried out. 2. Read More »
Tailgate opens unintentionally. Accidental or unnoticed activation of the button to open the tailgate on the vehicle key. E.g. when stored in trouser pocket, handbag etc. Read More »
Sliding sunroof panel of panoramic sliding sunroof reversed (temporarily, once, multiple times) during closing process without entrapment event. Sensitive parameterization of the automatic reversing function of the panoramic roof. Read More »
Tailgate opens unintentionally. Accidental or unnoticed activation of the button to open the tailgate on the vehicle key. E.g. when stored in trouser pocket, handbag etc. Read More »
Check right tailgate, rework if necessary Check/test procedure 1. Remove top center rear spoiler. For basic data, see AR72.20-P-4000WT. 2. Check outer top right of rear-end door for constriction and crack formation (Figure 1). Read More »
Mercedes-Benz AG (??A?A?MBAG??A?A?), the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY 2023 GLC (254 platform) vehicles, the panoramic sliding sunroof control unit software does not correspond to the latest ... Read More »
Sliding sunroof panel of panoramic sliding sunroof reversed (temporarily, once, multiple times) during closing process without entrapment event. Sensitive parameterization of the automatic reversing function of the panoramic roof. Read More »
When operating a control point to open the trunk lid or the tailgate, the trunk lock unlocks, but there is no actuation of the trunk control/tailgate control drive unit (M51/3). Faulty microswitch signal of trunk lock. Read More »
Trunk lid cannot be opened and closed with HANDS-FREE ACCESS (HFA). In the EZS control unit (N73), the fault code B1F8C14 ("The top sensor of the rear switch module has malfunctioned. There is a short circuit to ground or an open circuit. Read More »
Check right tailgate, rework if necessary Check/test procedure 1. Remove top center rear spoiler. For basic data, see AR72.20-P-4000WT. 2. Check outer top right of rear-end door for constriction and crack formation (Figure 1). Read More »
When operating a control point to open the trunk lid or the tailgate, the trunk lock unlocks, but there is no actuation of the trunk control/tailgate control drive unit (M51/3). Faulty microswitch signal of trunk lock. Read More »
Tailgate opens unintentionally. Accidental or unnoticed activation of the button to open the tailgate on the vehicle key. E.g. when stored in trouser pocket, handbag etc. Read More »
Tailgate opens unintentionally. Accidental or unnoticed activation of the button to open the tailgate on the vehicle key. E.g. when stored in trouser pocket, handbag etc. Read More »
When operating a control point to open the trunk lid or the tailgate, the trunk lock unlocks, but there is no actuation of the trunk control/tailgate control drive unit (M51/3). Faulty microswitch signal of trunk lock. Read More »
Crease formation on genuine leather seat covers in vehicles with low mileage ??A?A? Objects left on the seats for extended periods of time (pressure marks). ??A?A? Objects wedged between the seat backrest and seat cushion (e.g. Read More »
Noise at front seats between seat-back lining and function carrier. Noise is caused by friction of the two component parts. Remove the seat-back lining (back panel) of the front seat concerned using a special tool. Read More »
Complaint Updating the RAMSES 1.1 module to the latest SW-version E139.4 will lead to an error in the modules vtime and therefore the following possible connectivity issues: Remote Status: ??A?A? The last updated timestamp shown in ... Read More »
This is to notify you of the Service Campaign Launch to update the digital and replace the printed operators manual in 39 Model Year (MY) 2024 GLC, GLS, and AMG GT vehicles (167, 254, 192 and 290 platform). Read More »
