Technical Service Bulletins (TSBs) for the 2023 Acadia are official communications between GMC & their dealerships that describe processes for troubleshooting or fixing certain common problems.
All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
This service bulletin provides a procedure to add deadener to the batter tray bracket to correct customer concerns of a Service Engine Soon (SES), Reduced Power, Service Brake, Reduced Steering and/or Stabilitrak Message Illuminated on ... Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This service bulletin provides a procedure to add deadener to the batter tray bracket to correct customer concerns of a Service Engine Soon (SES), Reduced Power, Service Brake, Reduced Steering and/or Stabilitrak Message Illuminated on ... Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This Preliminary information communicates that a customer may come to the dealer complaining of a whining noise from the steering system. The dealer is advised not to perform any repairs at this time. Read More »
This Preliminary information communicates that a vehicle may come to the dealer with a "Service Steering Message" and no codes set that pertain to the steering system. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This technical bulletin provides a procedure to inspect and if need be, to remove the lower strut isolator to clean and scuff if the spring was rubbing against the fender area. Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This technical bulletin provides a procedure to inspect and if need be, to remove the lower strut isolator to clean and scuff if the spring was rubbing against the fender area. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. Read More »
This service bulletin provides a procedure to add deadener to the batter tray bracket to correct customer concerns of a Service Engine Soon (SES), Reduced Power, Service Brake, Reduced Steering and/or Stabilitrak Message Illuminated on ... Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This service bulletin provides information to dealership personnel that after performing a brake inspection, brake pad replacement, or any other repair that requires the caliper piston to be reseated may be causing DTC C05B0 to falsely ... Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This service bulletin provides a procedure to add deadener to the batter tray bracket to correct customer concerns of a Service Engine Soon (SES), Reduced Power, Service Brake, Reduced Steering and/or Stabilitrak Message Illuminated on ... Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This service bulletin provides information to dealership personnel that after performing a brake inspection, brake pad replacement, or any other repair that requires the caliper piston to be reseated may be causing DTC C05B0 to falsely ... Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels ... Read More »
This Preliminary information communicates to dealers? information related to a Malfunction Indicator Lamp (MIL) Illuminated due to a U0672 setting. Advises the technician to perform Electric Engine Coolant Pump connection inspections. Read More »
This engineering information (EI Lite) is requesting technicians use the FPR App process in regard to finding coolant leaking around the Coolant Control Valve (CCV). Read More »
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
Customer Satisfaction Program. Certain vehicles may have been built and shipped with the incorrect A/C compressor installed. Dealers are to replace the A/C compressor. Read More »
This informational bulletin advises the tech to validate if oil is leaking into the cooling system and to test and verify were to leak is coming from before replacing all the parts that wouldn't apply to the repair. Read More »
This service bulletin provides diagnostic aid information/procedures to perform inspections to determine if the engine needs to be replaced as opposed to just internal parts for knocking, rattle, squeak and/or squeal type noises from ... Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This service bulletin explains the difference in oil filters for gas engines with new oil pump control systems and the possibilities of what may happen using the incorrect filter. Read More »
The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay. Read More »
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This engineering information (EI) closure ends the need for gathering further information in regard to the Check Engine Lamp illuminated on the Driver Information Center (DIC). Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This informational bulletin advised the technician that the engine and related parts will be debited if found that the tech didn't properly prepare the engine block from dirt and debris in bolt holes or if found that the block was damaged ... Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This service bulletin provides information for dealers/technicians on New Labor Operations for Limited Production Option (LPO) Calibrated Accessories. Read More »
This service bulletin provides information to dealership personnel on automatic transmission shift and engine driveability concerns and/or MIL ON due to aftermarket oil bath air filter use. Read More »
This service bulletin provides a procedure to add deadener to the batter tray bracket to correct customer concerns of a Service Engine Soon (SES), Reduced Power, Service Brake, Reduced Steering and/or Stabilitrak Message Illuminated on ... Read More »
This service bulletin provides information for dealers/technicians on Rough Idle, Malfunction Indicator Lamp (MIL) Illuminated After Engine Repairs with DTCs P0016 and/or P0018 Set. Read More »
This technical bulletin provides a procedure to add deadener to the batter tray bracket to correct customer concerns of a Service Engine Soon (SES), Reduced Power, Service Brake, Reduced Steering and/or Stabilitrak Message Illuminated on ... Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage. Read More »
This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts. Read More »
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the Check Engine Lamp illuminated on the Driver Information Center (DIC). Read More »
This service bulletin provides diagnostic aid information/procedures to perform inspections to determine if the engine needs to be replaced as opposed to just internal parts for knocking, rattle, squeak and/or squeal type noises from ... Read More »
This service bulletin advises the tech that the rotational Clicking Noise Heard After Engine Shut Down may be normal characteristics of the vehicle. Read More »
This service bulletin provides information on a normal characteristic of a transmission that will not shift into overdrive range during cold ambient temperatures. Read More »
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention. Read More »
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention. Read More »
This Preliminary information communicates that a vehicle may come into the dealer with various concerns which may include a service engine light or various warning messages on the DIC. Read More »
This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set. Read More »
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global ... Read More »
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system. Read More »
This service bulletin provides repair information to correct a customer concern of MAF Sensor Calibration Update - DTCs P227C and P10BC Set After ECM Replacement. Read More »
This technical bulletin advises the technician to rest the MIL and diagnose additional DTCs for why the code is setting and disabling the start/stop system. Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts. Read More »
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. Read More »
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention. Read More »
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy. Read More »
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)
This Preliminary information communicates the potential for condensation to freeze up inside the Crankcase Pressure Sensor causing dtc P04FB to set. Read More »
This Preliminary information communicates the potential for condensation to freeze up inside the Crankcase Pressure Sensor causing dtc P04FB to set. Read More »
This Preliminary information communicates to dealers? information related to a Malfunction Indicator Lamp (MIL) Illuminated due to a U0672 setting. Advises the technician to perform Electric Engine Coolant Pump connection inspections. Read More »
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy. Read More »
This Preliminary information communicates a possible issue with the active fuel management rockers causing a misfire and the correction for this concern. Read More »
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on. Technician will find Diagnostic Trouble Code P2097 or P2099. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
This Preliminary information communicates a possible issue with the active fuel management rockers causing a misfire and the correction for this concern. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
This service bulletin provides information on a normal characteristic of a transmission that will not shift into overdrive range during cold ambient temperatures. Read More »
This Preliminary information communicates the potential for condensation to freeze up inside the Crankcase Pressure Sensor causing dtc P04FB to set. Read More »
This technical bulletin provides repair information to correct a customer concern of Rear Driveline Module Audible Noise Heard Between 20-70MPH. Read More »
This service bulletin advises the tech that the rotational Clicking Noise Heard After Engine Shut Down may be normal characteristics of the vehicle. Read More »
This bulletin provides a procedure to inspect and replace the torque tube to correct a customer concern of a Ratcheting Type Noise Heard from Under the Vehicle when Disengaging All Wheel Drive (AWD). Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This technical bulletin provides repair information to correct a customer concern of Rear Driveline Module Audible Noise Heard Between 20-70MPH. Read More »
This service bulletin provides a procedure to locate a possible shaft not inserted into the differential carrier that may have popped out to correct customer concerns of Transmission Grinds When Put Into Gear, Slipping, No Movement When ... Read More »
The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This service bulletin provides diagnostic information/procedures to aid the service technician in diagnosing 9T45/50/60 automatic transmissions with low mileage and DTCs current or history related to the control solenoids and valves. Read More »
This service bulletin provides information to dealership personnel on automatic transmission shift and engine driveability concerns and/or MIL ON due to aftermarket oil bath air filter use. Read More »
This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. Read More »
This service bulletin provides a procedure to locate a possible shaft not inserted into the differential carrier that may have popped out to correct customer concerns of Transmission Grinds When Put into Gear, Slipping, No Movement When ... Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This Preliminary information communicates that power liftgate actuators have been returned for warranty due to improper removal procedures. Read More »
This service bulletin advises the tech that the rotational Clicking Noise Heard After Engine Shut Down may be normal characteristics of the vehicle. Read More »
This Preliminary information communicates possible transmission fluid leak underneath the vehicle that may be root cause as a trans not being cleaned after production. Read More »
This service bulletin provides information on a normal characteristic of a transmission that will not shift into overdrive range during cold ambient temperatures. Read More »
This engineering information (EI) closure ends the need for gathering information from technicians in regards to having Loss of Propulsion, Loss of Traction and/or Grinding Type Noise Heard After Loss of Traction and/or Vehicle Towed Due ... Read More »
This Preliminary information communicates that a vehicle may come into the dealer with various concerns which may include a service engine light or various warning messages on the DIC. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to having Loss of Propulsion, Loss of Traction and/or Grinding Type Noise Heard ... Read More »
This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global ... Read More »
This engineering information (EI) closure ends the need for gathering information from the field in regards to Service AWD Lamp illuminated on driver information center (DIC). Read More »
This Preliminary information communicates possible transmission fluid leak underneath the vehicle that may be root cause as a trans not being cleaned after production. Read More »
This Preliminary information communicates that a vehicle may come into the dealer with various concerns which may include a service engine light or various warning messages on the DIC. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This diagnostic tip advises the tech not to separate the flexplate from the torque convertor or damage my occur if the engine is started while diagnosing for noise from the engine or transmission. Read More »
This service bulletin provides diagnostic information/procedures to aid the service technician in diagnosing 9T45/50/60 automatic transmissions with low mileage and DTCs current or history related to the control solenoids and valves. Read More »
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the Service AWD Lamp illuminated on the driver information center (DIC). Read More »
This service bulletin provides diagnostic information/procedures to aid the service technician in diagnosing 9T45/50/60 automatic transmissions with low mileage and DTCs current or history related to the control solenoids and valves. Read More »
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships. Read More »
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes ... Read More »
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes ... Read More »
This engineering information (EI) closure ends the need for gathering further information from technicians in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under the Front Row Seat. Read More »
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes ... Read More »
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes ... Read More »
This service bulletin assists technicians in setting up PicoScope hardware/software to monitor CAN bus traffic (voltage patterns) to aid Technical Assistance (TAC) and Field Service Engineers (FSEs) in diagnosing electrical issues present ... Read More »
This engineering information (EI) s requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This preliminary information (PI) provides information om Service Programming System (SPS) Error Codes (E4398, E4399, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491 or E6961). Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This service bulletin provides a procedure to add deadener to the batter tray bracket to correct customer concerns of a Service Engine Soon (SES), Reduced Power, Service Brake, Reduced Steering and/or Stabilitrak Message Illuminated on ... Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This service bulletin advises the tech that the rotational Clicking Noise Heard After Engine Shut Down may be normal characteristics of the vehicle. Read More »
This service bulletin provides repair information to correct a customer concern of No Crank, No Start, Quick Start/Stall, No FOB Detected, Key FOBs Inoperative, B3924 00, B3925 00, B3926 00, B3927 00, B3928 00 Set. Read More »
This technical bulletin provides repair information to correct a customer concern of Vehicle Will Not Lock and Unlock (Loss of Active Functions) Crank or Start (Loss of Passive Functions) with DTC P0513 Set. Read More »
This service bulletin assists technicians in setting up PicoScope hardware/software to monitor CAN bus traffic (voltage patterns) to aid Technical Assistance (TAC) and Field Service Engineers (FSEs) in diagnosing electrical issues present ... Read More »
This service bulletin provides repair information to correct a customer concern of OnStar Inoperative after Importing Vehicle from Canada to the United States. Read More »
This technical bulletin provides repair information to correct a customer concern of Vehicle Will Not Lock and Unlock (Loss of Active Functions) Crank or Start (Loss of Passive Functions) with DTC P0513 Set. Read More »
This technical bulletin provides repair information to correct a customer concern of No Crank, No Start, Quick Start/Stall, No FOB Detected, Key FOBs Inoperative, B3924 00, B3925 00, B3926 00, B3927 00, B3928 00 Set. Read More »
Customer Satisfaction Program - Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain 2022 and 2023 model year vehicles, built beginning December 2, 2021. Read More »
This service bulletin provides repair information to correct a customer concern of a water leak into interior, and/or various electrical concerns, liftgate actuator noisy or inoperative. Read More »
This service bulletin provides repair information to correct a customer concern of OnStar Inoperative after Importing Vehicle from Canada to the United States. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
Customer Satisfaction Program - Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain vehicles, built beginning December 2, 2021. Read More »
Customer Satisfaction Program - Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain vehicles listed, built beginning December 2, 2021. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships. Read More »
This service bulletin provides information for dealers/technicians on New Labor Operations for Limited Production Option (LPO) Calibrated Accessories. Read More »
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them. Read More »
This technical bulletin provides a procedure to replace the air bag and air bag harness to correct a condition of Airbag Malfunction Warning and Airbag Malfunction Indicator Illuminated with DTC B0001-1B due to corrosion. Read More »
Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain vehicles, built beginning December 2, 2021. Read More »
This warranty administration bulletin provides information for dealers/technicians on System Reset and Connector Reconnect Labor Code Numbers. Read More »
Customer Satisfaction Program - Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain vehicles, built beginning December 2, 2021. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This service bulletin provides a procedure to add deadener to the batter tray bracket to correct customer concerns of a Service Engine Soon (SES), Reduced Power, Service Brake, Reduced Steering and/or Stabilitrak Message Illuminated on ... Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This service bulletin provides repair information to correct a customer concern of a water leak into interior, and/or various electrical concerns, liftgate actuator noisy or inoperative. Read More »
This service bulletin provides information for dealers/technicians on Rough Idle, Malfunction Indicator Lamp (MIL) Illuminated After Engine Repairs with DTCs P0016 and/or P0018 Set. Read More »
Customer Satisfaction Program - Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain 2022 and 2023 model year vehicles, built beginning December 2, 2021. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using iPhone and Samsung Phones at Offset Positions. Read More »
This technical bulletin provides a procedure to add deadener to the batter tray bracket to correct customer concerns of a Service Engine Soon (SES), Reduced Power, Service Brake, Reduced Steering and/or Stabilitrak Message Illuminated on ... Read More »
This service bulletin provides information to dealership personnel that after performing a brake inspection, brake pad replacement, or any other repair that requires the caliper piston to be reseated may be causing DTC C05B0 to falsely ... Read More »
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Coaxial Related Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using iPhone and Samsung Phones at Offset Positions. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the Check Engine Lamp illuminated on the Driver Information Center (DIC). Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This service bulletin provides diagnostic/repair information to correct a customer concern of Cellphone not Charging or USB Receptacle Inoperative. Read More »
This warranty administration bulletin provides information for dealers/technicians on System Reset and Connector Reconnect Labor Code Numbers. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This engineering information (EI) s requesting to gather information from technicians, perform the check list provided and contact the engineer listed in regards to a Service Front Camera message on the driver information center (DIC), ... Read More »
This service bulletin provides repair information to correct a customer concern of MAF Sensor Calibration Update - DTCs P227C and P10BC Set After ECM Replacement. Read More »
This technical bulletin advises the technician to rest the MIL and diagnose additional DTCs for why the code is setting and disabling the start/stop system. Read More »
This preliminary information (PI) provides information om Service Programming System (SPS) Error Codes (E4398, E4399, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491 or E6961). Read More »
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them. Read More »
This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with ... Read More »
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention. Read More »
This Preliminary information communicates a GM part number for reflective high temperature heat or insulating tape when repairing wiring harnesses. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This engineering information (EI) closure ends the need for gathering information from technicians in regards to a Service Front Camera message on the driver information center (DIC), having the loss of the front camera features and/or ... Read More »
Customer Satisfaction Program - Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain 2022 and 2023 model year vehicles, built beginning December 2, 2021. Read More »
Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain vehicles, built beginning December 2, 2021. Read More »
Customer Satisfaction Program - Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain 2022 and 2023 model year vehicles, built beginning December 2, 2021. Read More »
Customer Satisfaction Program - Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain vehicles, built beginning December 2, 2021. Read More »
Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain vehicles, built beginning December 2, 2021. Read More »
Customer Satisfaction Program - Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain 2022 and 2023 model year vehicles, built beginning December 2, 2021. Read More »
Customer Satisfaction Program - Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain vehicles listed, built beginning December 2, 2021. Read More »
This Preliminary information communicates to dealers? information related to a Malfunction Indicator Lamp (MIL) Illuminated due to a U0672 setting. Advises the technician to perform Electric Engine Coolant Pump connection inspections. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on. Technician will find Diagnostic Trouble Code P2097 or P2099. Read More »
This service bulletin provides information for dealers/technicians on New Labor Operations for Limited Production Option (LPO) Calibrated Accessories. Read More »
This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines. Read More »
Customer Satisfaction Program. Certain vehicles may have been built and shipped with the incorrect A/C compressor installed. Dealers are to replace the A/C compressor. Read More »
This technical bulletin provides a procedure to replace the air bag and air bag harness to correct a condition of Airbag Malfunction Warning and Airbag Malfunction Indicator Illuminated with DTC B0001-1B due to corrosion. Read More »
Customer Satisfaction Program - Certain vehicles may have a condition in which the second-row center seatbelt buckle falls between the seats when the adjacent seat is tipped and slid forward. Dealers are to add an elastic strap. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This service bulletin provides repair information to correct a customer concern of a water leak into interior, and/or various electrical concerns, liftgate actuator noisy or inoperative. Read More »
This service bulletin provides repair information to correct a customer concern of a water leak into interior, and/or various electrical concerns, liftgate actuator noisy or inoperative. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This service bulletin provides information for the Global Warranty Management (GWM) Warranty Parts Center (WPC) Part Photo Return Process (U.S. Dealers Only). Read More »
Service Update. On certain vehicles, the sealer used in the vehicle interior and underbody may have failed the in-plant adhesion testing. Dealers are to apply new sealer to the affected areas. Read More »
This Warranty Administration bulletin provides information on the Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program. Read More »
This Preliminary information communicates that power liftgate actuators have been returned for warranty due to improper removal procedures. Read More »
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks. Read More »
This bulletin updates the position of General Motors on refinishing aluminum wheels. GM has determined that wheel refinishing under warranty will no longer be performed. Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement. Read More »
This service bulletin provides information for dealers/technicians on Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel). Read More »
This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement. Read More »
This service bulletin provides information for dealers/technicians on Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel). Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks. Read More »
This engineering information (EI) closure ends the need for gathering further information from technicians in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under the Front Row Seat. Read More »
This engineering information (EI) s requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This engineering information (EI) closure ends the need for gathering further information from technicians in regard to having a squeak, rattle and/or creak type noise heard from the second row-seat area. Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to having a squeak, rattle and/or creak type noise heard from the second row-seat ... Read More »
Customer Satisfaction Program. Due to the industry-wide semiconductor shortage, the front driver and passenger seat cushion ventilation blowers are not functional on certain 2022-2023 model year vehicles listed above, built beginning ... Read More »
This Preliminary information communicates that power liftgate actuators have been returned for warranty due to improper removal procedures. Read More »
Due to the industry-wide semiconductor shortage, the front driver and passenger seat cushion ventilation blowers are not functional on certain 2022-2023 model year vehicles listed above, built beginning March 30, 2022. Read More »
Customer Satisfaction Program. Due to the industry-wide semiconductor shortage, the front driver and passenger seat cushion ventilation blowers are not functional on certain 2022-2023 model year vehicles listed above, built beginning ... Read More »
Customer Satisfaction Program. Due to the industry-wide semiconductor shortage, the front driver and passenger seat cushion ventilation blowers are not functional on certain 2022-2023 model year vehicles listed above, built beginning ... Read More »
Customer Satisfaction Program. Due to the industry-wide semiconductor shortage, the front driver and passenger seat cushion ventilation blowers are not functional on certain 2022-2023 model year vehicles listed above, built beginning ... Read More »
Customer Satisfaction Program. Due to the industry-wide semiconductor shortage, the front driver and passenger seat cushion ventilation blowers are not functional on certain 2022-2023 model year vehicles listed above, built beginning ... Read More »
Customer Satisfaction Program. Due to the industry-wide semiconductor shortage, the front heated/ventilated seats, front heated seats, or rear heated seats are not functional on certain 2022-2023 model year vehicles listed above, built ... Read More »
This service bulletin provides a procedure to add deadener to the batter tray bracket to correct customer concerns of a Service Engine Soon (SES), Reduced Power, Service Brake, Reduced Steering and/or Stabilitrak Message Illuminated on ... Read More »
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on. Technician will find Diagnostic Trouble Code P2097 or P2099. Read More »
This Preliminary information communicates to dealership technicians that if they receive a radio with the 2 stickers as noted above, the radio was remanufactured with missing components and will need to order another radio unit from the ... Read More »
This service bulletin provides a procedure to add deadener to the batter tray bracket to correct customer concerns of a Service Engine Soon (SES), Reduced Power, Service Brake, Reduced Steering and/or Stabilitrak Message Illuminated on ... Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This engineering information (EI) s requesting to gather information from technicians, perform the check list provided and contact the engineer listed in regards to a Service Front Camera message on the driver information center (DIC), ... Read More »
FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA
This engineering information (EI) closure ends the need for gathering information from technicians in regards to a Service Front Camera message on the driver information center (DIC), having the loss of the front camera features and/or ... Read More »
This engineering information (EI) closure ends the need for gathering information from technicians in regards to a Service Front Camera message on the driver information center (DIC), having the loss of the front camera features and/or ... Read More »
This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. Read More »
This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. Read More »
This Preliminary information communicates that a vehicle may come to the dealer with a service front camera message with a U026A. The technician is advised to replace the front view camera. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Coaxial Related Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This Preliminary information communicates that a customer may come to the dealer complaining of a whining noise from the steering system. The dealer is advised not to perform any repairs at this time. Read More »
This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. Read More »
This service bulletin provides repair information on release of Radio Software Version V160 Update to correct customer concerns of radio software issues. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This Preliminary information communicates that a customer may notice that the gridlines on the backup camera are very dim. They may mention that this occurred after an OTA update. The dealer technician is advised to perform no repairs. Read More »
This Preliminary information communicates to the technician that GM is aware of this concern with audio loss and the OnStar LED being red. GM is working on a solution to correct this customers concern. Read More »
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships. Read More »
This bulletin updates the position of General Motors on refinishing aluminum wheels. GM has determined that wheel refinishing under warranty will no longer be performed. Read More »
This service bulletin assists technicians in setting up PicoScope hardware/software to monitor CAN bus traffic (voltage patterns) to aid Technical Assistance (TAC) and Field Service Engineers (FSEs) in diagnosing electrical issues present ... Read More »
This engineering information (EI) s requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This service bulletin provides repair information to correct a customer concern of No Crank, No Start, Quick Start/Stall, No FOB Detected, Key FOBs Inoperative, B3924 00, B3925 00, B3926 00, B3927 00, B3928 00 Set. Read More »
This technical bulletin provides repair information to correct a customer concern of Vehicle Will Not Lock and Unlock (Loss of Active Functions) Crank or Start (Loss of Passive Functions) with DTC P0513 Set. Read More »
This service bulletin assists technicians in setting up PicoScope hardware/software to monitor CAN bus traffic (voltage patterns) to aid Technical Assistance (TAC) and Field Service Engineers (FSEs) in diagnosing electrical issues present ... Read More »
This service bulletin provides repair information to correct a customer concern of OnStar Inoperative after Importing Vehicle from Canada to the United States. Read More »
This technical bulletin provides repair information to correct a customer concern of Vehicle Will Not Lock and Unlock (Loss of Active Functions) Crank or Start (Loss of Passive Functions) with DTC P0513 Set. Read More »
This technical bulletin provides repair information to correct a customer concern of No Crank, No Start, Quick Start/Stall, No FOB Detected, Key FOBs Inoperative, B3924 00, B3925 00, B3926 00, B3927 00, B3928 00 Set. Read More »
This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This service bulletin provides repair information to correct a customer concern of OnStar Inoperative after Importing Vehicle from Canada to the United States. Read More »
This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using iPhone and Samsung Phones at Offset Positions. Read More »
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Coaxial Related Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using iPhone and Samsung Phones at Offset Positions. Read More »
This service bulletin provides information for the Global Warranty Management (GWM) Warranty Parts Center (WPC) Part Photo Return Process (U.S. Dealers Only). Read More »
This Warranty Administration bulletin provides policy information on Causal Part requirements for transactions submitted to GM for payment. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with ... Read More »
This engineering information (EI) closure ends the need for gathering information from technicians in regards to a Service Front Camera message on the driver information center (DIC), having the loss of the front camera features and/or ... Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This service bulletin provides diagnostic/repair information to correct a customer concern of Cellphone not Charging or USB Receptacle Inoperative. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This engineering information (EI) s requesting to gather information from technicians, perform the check list provided and contact the engineer listed in regards to a Service Front Camera message on the driver information center (DIC), ... Read More »
This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with ... Read More »
This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen. Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with certain ISO updates on Apple 15 phones and advises customer to update their phone to the lastest ISO update. Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the latest ISO update on Apple 15 phones. Read More »
This Preliminary information communicates to the technician that GM is aware of this concern with audio loss and the OnStar LED being red. GM is working on a solution to correct this customers concern. Read More »
This service bulletin provides repair information on release of Radio Software Version V160 Update to correct customer concerns of radio software issues. Read More »
This Preliminary information communicates to the technician that GM is aware of this concern with audio loss and the OnStar LED being red. GM is working on a solution to correct this customers concern. Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the lastest ISO update on Apple 15 phones. Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the lastest ISO update on Apple 15 phones. Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the latest ISO update on Apple 15 phones. Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the lastest ISO update on Apple 15 phones. Read More »
This service bulletin provides information on submitting quality Photos of Various Vehicle Concerns to the GM Technical Assistance Center (TAC). Read More »
This service bulletin provides information on All hazmat parts being returned to the Warranty Parts Center (WPC) must be shipped using Central Transport. Hazardous materials should never be sent by air transportation to the WPC. Read More »
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim. Read More »
This Warranty Administration bulletin provides information on the Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program. Read More »
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only). Read More »
This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This service bulletin provides information on submitting quality Photos of Various Vehicle Concerns to the GM Technical Assistance Center (TAC). Read More »
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only). Read More »
This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only). Read More »
This warranty administration bulletin provides policy information for variable diagnostic time allowances on select labor operations (U.S. Only). Read More »
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks. Read More »
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only). Read More »
This Warranty Administration bulletin provides retail and wholesale service personnel with the policies/procedures and the warranty transaction submission procedures that support the Personal Property Damage process. Read More »
This service bulletin provides information on Handling Requests for Modifications to Permanently Import/Export Vehicles Between the U.S. and Canada. Read More »
This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This service bulletin provides information for dealers/technicians on New Labor Operations for Limited Production Option (LPO) Calibrated Accessories. Read More »
This Preliminary information communicates a GM part number for reflective high temperature heat or insulating tape when repairing wiring harnesses. Read More »
