When my Fusion hits a bump my brakes pedal goes almost to the floor. When I brake hard and turn wheels my brake pedal goes almost to the floor. When I brake on wet pavement my brake pedal almost goes to the floor. When my brake pedal almost goes all the way to the floor and I have to pump my to get the car to stop. The brakes get better in a few days after ABS valves closes. This has been going on for over two years. This happen today when I was stopping behind a car to make a turn and my pedal went to the floor and I was just able to stop in time before I hit the car. I know the ABS module needs to be replace at a cost of $1200 to me. I also know this a common problem in the Ford Fusion that Ford will not fix!

- Buda, TX, USA

Anti lock brake pump failure. Brakes failed, went to floor, almost crashed car. Numerous complaints online, common problem and safety issue Ford should fix.

- Shelby Charter Township, MI, USA

The break pedal goes to the floor. It does not break at all. This issue started after an ABS event. I changed the master cylinder and rotors/pads with out luck. I tried to bleed the ABS pump using a scan tool and no changes.

- Salinas, CA, USA

My brakes goes all the way the floor when stopping....from time to time

- Duncanville, TX, USA

Intermittently my brakes will go out, most often this happens after the vehicle has been off and I turn it off and try to reverse though it also happens when in drive. It has happens on access roads, the highway, my driveway and most often in parking lots. My car will roll and be completely unresponsive to the fact that I have my foot on the brake. The brake pedal goes soft and I can press it all the way to the floor. My brake light, ABS light, etc on the dashboard all light up and my car keeps rolling. I try turning my vehicle on and off as sometimes even the emergency brake or putting the car in park will not get the vehicle to stop. I have almost hit other cars and pedestrians because of this issue and it is highly dangerous and come to find out a known glitch for some 2010 Ford Fusion.

- Hutto, TX, USA

Complete brake failure due to an electronic component failure. The brake pedal went all the way to the floorboard. There was no collision and the vehicle came to rest on the shoulder of the highway.check brake system he car has no brake.

- Citrus Heights, CA, USA

(my daily path is on city streets marked 45 mph. Incidents generally occur at intersections with stop lights/signs; I am continuing straight and not turning) brakes do not function when brake pedal is pressed while driving during wet conditions, conditions with a dusting of snow or if vehicle hits a bump while brake pedal is pressed. Instead, the brake pedal falls all the way to the floor and the vehicle continues forward. Driver must pump brake pedal numerous times to get pedal to return to normal position and for brakes to activate. This has not happened under normal conditions. The ABS system does not seem to activate, as it does not function with the normal chattering movement that an ABS system has. Driver can hear a slight hum and feel normal pedal resistance when the brake pedal is initially pressed, then the brake pedal falls to the floor and the vehicle continues forward. This does not always occur when the pavement is wet, as it is very unpredictable. The brake pads on this vehicle are somewhere around a year old. Tires are about 8 months old and have full tread. The vehicle has been driven 159,000 miles with the first incidence of brake failure happening somewhere around 40,000 miles. I was narrowly missed by a semi truck driver on Friday morning as I slid through a red light, on a wet roadway, with my foot on the pedal which had fallen to the floor. This is not just a problem with my vehicle, as there are hundreds of people reporting the same issue on forums online. Please make Ford recall these vehicles before someone dies. I will put a date of occurrence below but it only signifies the latest date this has happened. This began in November 2012 and seems to be increasing in frequency. I have experienced brake failure three times in the last 45 days.

- Mcloud, OK, USA

Takata inflators: My vehicle was not driven for 6 months as part of the recall. I was given a rental while waiting for parts, but since having the recall parts installed my vehicle has started having brake problems. When driving the brake pedal will go all the way down to the floor. It feels like the brakes will not hold pressure. I had the brake pads and rotors changed after it sat for 6 months.

- Carthage, MO, USA

I had a recurring issue where the power brakes failed and we were forced to depress the brakes almost to the floor to get them to work. I reported this issue a couple years ago and was contacted by a NHTSA employee. At that time the dealer had said it was permanently resolved, which I told the NHTSA employee. The employee told me to contact him if it happened again. It happened again this evening. I replied to the employee's email, however the employee no longer seems to work there. It occurred while I was backing slowly out of my driveway, and shifting out of reverse to drive. The brake assist service light came on.

- Austin, TX, USA

The first time this happened, I hit a pothole. The brakes felt loose/spongy, and I had to press down all the way for the brakes to work. I pumped them a few times, and it seemed to fix the problem. It was raining a bit the other day. I turned, and brakes a little and felt the ABS kick in. After that, I was coming to a stop light. I began to brake, but had to press down about halfway to even begin braking, and all the way to brake completely. This problem has continued since then, even without rain

- Waldorf, MD, USA

1st incident while trying to make a turn I applied my brakes and the pedal went to the floor I pumped the pedal and was able to slow my vehicle to make the turn. It happened again while trying to come to a stop on a slight incline to park again I applied brakes and it went to the floor I had to pump the brakes to come to a stop. Second incident 2 weeks after the 1st while approaching an intersection I applied brakes and the vehicle came to a stop but instantly lost pressure and the pedal went to the floor. My vehicle started rolling into the intersection and I had to pump the brakes to be able to avoid hitting another vehicle. This seems to be happening sporadically. Ive researched the problem and it seems multiple people have had the same serious safety issues with the brakes & has cost over $1,000 to possibly correct the situation.

- Union, MO, USA

Unexpected increase of braking distance. When doing a K turn, I should be able to stop but the car continue to rolls when brake is pressed to the floor. This caused me to roll into a curb. This happens regularly but inconsistently. The car was going less then 5 miles an hour and took more then 5 feet to come to a complete stop with the pedal pressed all the way.

- Cherry Hill, NJ, USA

There have been numerous occasions when I hit my brakes and the pedal goes all the way to the floor and I cannot come to a complete stop. However, if I pump my brakes, my brakes usually work like normal but typically I am having to slam on them which is dangerous. This happens any time I want to stop. It doesn't matter if I am on the freeway or city street or even trying to turn into my driveway.

- Fort Worth, TX, USA

Vehicle in motion, at 35-40mph with the brake pedal to the floor, the vehicle will take 6-7 car lengths to come to a full stop, slowly, with no locking of tires, no ABS. No error codes. Shop #1 went through brake system and said it sounds like the hcu is bad. Ford dealership is telling me that the braking distance, response (pedal to the floor) is normal for this car. At freeway speeds, the stopping distance is so long there would be no way to avoid an accident. Dealership states since no codes are showing, they won't physically test or warranty the hcu. This is an on-going issue with the car that is getting worse over time. This is a known issue, without codes, and has resulted in an investigation. Recommend speeding up that investigation.

- Taylorsville, UT, USA

Shortly after the ABS of the car was activated on loose gravel, my brake pedal faded and ultimately went to the floor forcing me to use the emergency brake to stop the car to avoid going thru an intersection, potentially causing an accident. Pedal braking power is almost non-existent. There were no warning lights, and the car reports everything is fine with the braking system.

- Sioux Falls, SD, USA

The contact owns a 2010 Ford Fusion. The contact stated that the brakes failed. The contact had to slam on the brake pedal with excessive force to stop the vehicle. The failure occurred more than once. Multiple messages and unknown warning indicators illuminated on the instrument panel, including "service advancetrac" and "service brakes". the vehicle was taken to an independent mechanic who diagnosed that a new anti-lock brake system control module was needed. The vehicle was currently being repaired. The manufacturer and dealer were not made aware of the failure. The failure mileage was 81,000.

- Yuva City, CA, USA

The contact owns a 2010 Ford Fusion. While driving approximately 5 mph, the brakes lost power and the ABS indicator illuminated. The vehicle was taken to an independent mechanic who diagnosed and replaced the brake module. The manufacturer and dealer were not made aware of the failure. The failure mileage was approximately 98,000.

- Stoneville, NC, USA

When trying to stop vehicle, the brake pedal lowers to floor and is slow to stop the car. Car continues to travel with foot on the pedal. All diagnostic tests on brakes and master cylinder are stating that brakes are working as they should with no problems to fix but the brake pedal does not stop the car. Everything that could be causing the pedal to lower to the floor and be slow to stop the vehicle has been checked multiple times. Pads are good, rotors are good, brake fluid good, no leaks, brake lines are good, no air in lines, master cylinder is good. According to social media outlets and Ford forums, there are hundreds of complaints with the same exact problem with the soft brake pedal and failure to stop the vehicle. So, the question is...why has there not been a recall?

- Eht, NJ, USA

While driving on dry pavement and transitioning to a dirt road, the hcu unit has malfunctioned while applying the brakes and caused my vehicle to have no brakes and the vehicle failed to stop. I was forced to use the emergency brake to avoid an accident. This caused the entire braking system to fail and the vehicle has been in the shop for over 7 business days with no concrete repair in site. To date the estimated cost for repair not including the hcu is $1,500 just in labor to try and find the issue.

- Buchanan, MI, USA

During my normal daily commute I experienced a terrifying and unannounced loss of breaking power. I was simply coming to a stop at a light in heavy traffic and lost total break response. I narrowly missed causing a accident with stopped traffic. I was driving responsibly in a light drizzle when it happened. I am told the ABS module sensed loss of traction in at least one tire so it kicked on. This only made the situation a panic stop. The pedal went to the floor and breaking power was only about 10% of the normal feel. After this event the breaks never regained their power and had to have my car towed to service. The service center told me this is somewhat common and they could fix the issue, $1600 later I have a new ABS module and the breaks works better but not 100% of where they were before. I have heard of several other people's stories since this event and all are the same issue. The event was such a unannounced and terrifying experience I will be selling the car. I am a 35, perfect driving record, drive 20K miles+ every year and never experienced a situation like this where I was helpless. And knowing the manufacturer knows of the problem is appalling.

- Batavia, OH, USA