Technical Service Bulletins (TSBs) for the 2020 SQ7 are official communications between Audi & their dealerships that describe processes for troubleshooting or fixing certain common problems.
All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
This bulletin explains that the steering wheel may warm up while being held leading to the impression that he steering wheel isn't heating evenly. Read More »
This bulletin explains that the steering wheel may warm up while being held leading to the impression that he steering wheel isn't heating evenly. Read More »
This bulletin provides information when DTCs B200FF0, B200FF1, B200FF3, or B200FF4, B200FF5 are stored in the J775 suspension control unit. Read More »
This bulletin provides information for when the rear suspension lowering is intermittently unavailable. One of the following DTCs may be present in the suspension control module: C11B515 or C11B615. Read More »
This bulletin provides information for when the messages "Air suspension: system fault" or "Shock absorber system/suspension" is shown in the instrument cluster, and one or more of the following DTCs are stored B200FF0, B200FF1, B200FF3, ... Read More »
This bulletin contains repair instructions for when there is rumbling, squeaking, creaking or similar noises from the front end when driving on uneven roads. Read More »
This bulletin contains repair instructions for when there is rumbling, squeaking, creaking or similar noises from the front end when driving on uneven roads. Read More »
This bulletin contains information on how to fix a clunking or rattling noise heard from the rear suspension when the vehicle is driven over bumps. Read More »
This bulletin contains information on how to fix a clunking or rattling noise heard from the rear suspension when the vehicle is driven over bumps. Read More »
This bulletin contains information on how to fix a clunking or rattling noise heard from the rear suspension when the vehicle is driven over bumps. Read More »
This bulletin provides information when there is an air suspension malfunction warning in the cluster; DTC C1260F0n or U112100 is stored in the suspension control module. Read More »
This bulletin provides information for when the rear suspension lowering is intermittently unavailable. One of the following DTCs may be present in the suspension control module: C11B515 or C11B615. Read More »
This bulletin provides information for when an unexpected Audi presense front intervention such as a front end warning, a warning jolt, partial braking, or emergency braking occurs and a warning appears in the instrument cluster and ... Read More »
This bulletin provides instructions for when the customer is concerned about unexpected Audi pre sense front intervention such as an Audi pre sense front warning, front warning jolt, front partial braking, or an audi pre sense emergency ... Read More »
This informational contains an explanation for when the customer hears creaking noises when braking at almost standstill (crawling when pulling away or briefly before standstill). Read More »
This bulletin provides information for when one or more DC is stored in the ABS control unit related to the parking switch; DTC C100C07 and/or C100C29. Read More »
This bulletin provides information for when the central locking/parking brake warning, or alarm sounds, or if there are exterior mirror issues. DTCs B122D29, U122800, and/or B14FF29 may be stored. Read More »
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning. Read More »
This bulletin contains repair instructions for when there is an oil leak from the rear of the vehicle and the sealing caps are missing from the pressure limiting valves. Read More »
This bulletin contains repair instructions for 3.0 and 2.9 TFSI engines that have oil loss around the engine compartment, front end, and underbody. Read More »
This bulletin provides information for when the MIL is on, there is a whistling noise, leaking air Bank 2 - DTC P2ADF00, Engine Crankcase breather. Read More »
This bulletin provides information for when the MIL is on, there is a whistling noise, leaking air Bank 2 - DTC P227900, Engine Crankcase breather. Read More »
This bulletin provides information for when the red coolant warning lamp is on and the DTCs P218100, P017B00, P017C00, and/or P017E00 are stored in the ECM. Read More »
This bulletin provides information for when the customer advises that there is cracking, grinding, rattling, humming, whining, or similar interference. Read More »
This bulletin advises of an improved sensor to address when the air conditioning system does not cool the cabin and DTCs P053000 and/or P251500 is present. Read More »
This bulletin advises that techs should document the specific o-ring seal that is replaced if a refrigerant leak is found and caused by the o-ring seal. Read More »
This bulletin contains repair instructions for 3.0 and 2.9 TFSI engines that have oil loss around the engine compartment, front end, and underbody. Read More »
This bulletin provides information for when the MIL is illuminated; DTC P030000 is stored in the ECM, and corrosion marks are on the cylinder walls. Read More »
This bulletin provides information for when the red coolant warning lamp is on and the DTCs P218100, P017B00, P017C00, and/or P017E00 are stored in the ECM. Read More »
Affected Engine Control Software does not disable the warm-up correction factor following engine start and warm-up as described in Auxiliary Emission Control Device (AECD) documentation. Read More »
Affected Engine Control Software does not disable the warm-up correction factor following engine start and warm-up as described in Auxiliary Emission Control Device (AECD) documentation. Read More »
Affected Engine Control Software does not disable the warm-up correction factor following engine start and warm-up as described in Auxiliary Emission Control Device (AECD) documentation. Read More »
This bulletins provides information when the radiator fans, alarm, or wipers are not working; DTC P048000, _048100, U063200, U063300, U10F300, U10A400, P10EF00. Read More »
ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS
This bulletin describes various conditions that may have arisen due to a leak in the corrugated windshield washer hose, and the associated repair. Read More »
This informational bulletin states to check for fluid or residue in the control line when a coolant pump is replaced, this indicates if further repairs need to be undertaken. Read More »
Affected Engine Control Software does not disable the warm-up correction factor following engine start and warm-up as described in Auxiliary Emission Control Device (AECD) documentation. Read More »
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)
This bulletin provides information for when the MIL is on, there is a whistling noise, leaking air Bank 2 - DTC P2ADF00, Engine Crankcase breather. Read More »
This bulletin provides information for when an EPCO warning and a fuel system warning are displayed in the instrument cluster with DTC B10581B. Read More »
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
This bulletin provides information when there is an air suspension malfunction warning in the cluster; DTC C1260F0n or U112100 is stored in the suspension control module. Read More »
This bulletin provides information for when the message "Electrical system: fault" is in the instrument cluster - event memory B200094 (00C4). Read More »
This bulletin provides information for when the MIL is on, there is a whistling noise, leaking air Bank 2 - DTC P2ADF00, Engine Crankcase breather. Read More »
This bulletin provides information for when there is an electrical or drive system fault, Battery management 2 (48V battery) with DTC P0AA100. Read More »
This bulletin provides information for when the starter battery is discharged, and the vehicle cannot be started due to the front adjustment seat switch becoming jammed. Read More »
This bulletin provides the ODIS test plan for when the vehicle doesn't start, or the ignition cannot be turned on due to a drained 12V battery (A). Read More »
This bulletin provides information for when the air conditioning system does not cool the cabin and DTCs P053000 and/or P251500 are present. Read More »
This bulletin provides information for when the 48V battery is in a low voltage protection state and will not accept a charge; DTC P0A7D00 is logged. Read More »
This bulletin states that it takes about 20 seconds after switching the ignition on for the Audi Pre Sense symbol advising that "Audi pre sense not available at the moment" Read More »
This bulletin provides information to address when the Audi connect "User management" screen is greyed out, and the customer cannot complete the key user pairing. OR the SOS emergency button is red or flashing read. Read More »
This bulletin describes the ways in which a variety of Audi vehicles connect to Apple Wireless CarPlay, and the methods to troubleshoot connection concerns. Read More »
This bulletin states that an SOS malfunction accompanied by DTCs U142100, U164200, and/or U122C100 my be stored erroneously and the ETCs should be cleared. Read More »
This bulletin advises to replace the electronics control module manufactured between 3/16/2019 - 5/22/2019 when sound from all sources will not play in the vehicle. Read More »
This informational bulletin states that for DTC U101400 to not perform any repairs and that this does not affect the customer or their experience. Read More »
This bulletin advises to replace the electronics control module manufactured between 3/16/2019 - 5/22/2019 when sound from all sources will not play in the vehicle. Read More »
This informational bulletin states to delete the DTCs and not replace parts for when there is a malfunction message and DTC B130474 and B130574 are sporadically stored. Read More »
This bulletin contains instructions for creating a PSS record when DTC C12D5FA is stored and the driver assist systems are inoperable and a warning message is displayed. Read More »
This bulletin contains a workaround for DTC U131C00 and the HUD not turning on with "The selected system is currently unavailable" message and 12V battery might be drained periodically. Read More »
This bulletin contains repair instructions for when the warning message "SOS Emergency call function deactivated" is seen in the instrument cluster. Read More »
This bulletin contains instructions for when the rear lid is closed but the lights on the rear bumper do not switch over to the main lights on the rear lid. Read More »
Elsa2Go campaign information is now 100% aligned with ElsaPro. This update to Elsa2Go ensures that both systems are displaying the same campaign information, including OPEN/CLOSED status, repair date as well as criterions at the same time ... Read More »
This bulletin contains instructions for when DTC U142100, U164200, and/or U122C00 are stored in the Gateway module with an SOS malfunction message in the instrument cluster. Read More »
This bulletin contains information for when the messages appear in the instrument cluster about the high beam assist and/or traffic sign detection with DTC C12B3FD. Read More »
This bulletin advises the technician to create a PSS record for when after a software update, with active privacy settings, e.g. "Use of vehicle position", the pop-up window is shown with every ignition cycle. Read More »
This bulletin contains instructions for creating a PSS record when DTC C12D5FA is stored and the driver assist systems are inoperable and a warning message is displayed. Read More »
This bulletin contains repair instructions for when there is sporadic or permanent no sound on any source (radio, media, navigation, and phone). Read More »
This informational bulletin contains instructions for when a non-plus sized iPhone heats up while wirelessly charging and the CarPlay screen may appear frozen. Read More »
This bulletin contains instructions for creating a PSS record when DTC C12D5FA is stored and the driver assist systems aer inoperable and a warning message is displayed. Read More »
This bulletin contains information for when the messaegs appear in the instrument cluster about the high beam assist and/or traffic sign detection with DTC C12B3FD. Read More »
Audi connect Section: Moved to end of document. Post-Road Test Section: ADDED Steps: - Verify SOS button is green and Roadside assistance button LED will remain off - It may take up to 20 minutes for the emergency call system to ... Read More »
This bulletin provides information for when there is an electrical or drive system fault, Battery management 2 (48V battery) with DTC P0AA100. Read More »
This bulletin provides instructions for when the anti-theft alarm has gone off for no reason, or did not go off at all. No DTCs are stored. Read More »
This bulletin provides information when the Presense has a malfunction or if driver assist systems are sporadically inoperative; DTC B200FD9 is stored in the driver assist module. Read More »
This bulletin provides information when the Audi presesnse malfunctions or the driver assist systems are inoperable and DTC C12D5FA is stored. Read More »
This bulletin provides information when the message "Drive system: Fault. Limited performance appears; DTCs P048000, P048100, U063300, P069400. Read More »
This bulletin provides information for when the messages "Air suspension: system fault" or "Shock absorber system/suspension" is shown in the instrument cluster, and one or more of the following DTCs are stored B200FF0, B200FF1, B200FF3, ... Read More »
This bulletin provides an SVM update for when the warning light for the suspension appears in the instrument cluster, and the SVM registers an unknown event when carrying out "Check control unit configuration" and cannot be automatically ... Read More »
This bulletin provides instructions for when the red coolant temperature is displayed in the instrument cluster and the engine fans are running bu the coolant temperature gauge does not display an excessively high temperature, or the MIL ... Read More »
This bulletin provides information for when an EPCO warning and a fuel system warning are displayed in the instrument cluster with DTC B10581B. Read More »
This bulletin provides information for when an SOS malfunction is displayed in the instrument cluster; DTCs U142100, U164200, and/or U122C00. Read More »
This bulletin states to replace the instrument cluster control module when DTCs B11E101 and B11E201 are stored in the instrument cluster and night vision respectively. Read More »
This bulletin contains a ZDC update for when DTC C128311 is incorrectly stored and there is a laser light malfunction warning displayed in the instrument cluster. Read More »
This bulletin contains repair instructions for when the warning message "SOS Emergency call function deactivated" is seen in the instrument cluster. Read More »
This bulletin contains repair instructions for when the warning message "SOS Emergency call function deactivated" is seen in the instrument cluster. Read More »
This bulletin contains repair instructions for when the warning message 'SOS Emergency call function deactivated' is seen in the instrument cluster. Read More »
ELECTRICAL SYSTEM:INSTRUMENT PANEL:FUEL GAUGE:FUEL LEVEL FLOAT/SENSOR/SENDING UNIT
This Pending Service Solution requests that technicians create a record in the Pending Service Solutions database in instances where the MIL/EPC light is illuminated with various warnings or poor performance; P060C00 is stored. Read More »
This bulletin contains information for when the messages appear in the instrument cluster about the high beam assist and/or traffic sign detection with DTC C12B3FD. Read More »
This bulletin advises the technician to create a PSS record for when after a software update, with active privacy settings, e.g. "Use of vehicle position", the pop-up window is shown with every ignition cycle. Read More »
This informational bulletin contains instructions for when a non-plus sized iPhone heats up while wirelessly charging and the CarPlay screen may appear frozen. Read More »
This bulletin advises the technician to create a PSS record for when after a software update, with active privacy settings, e.g. "Use of vehicle position", the pop-up window is shown with every ignition cycle. Read More »
This bulletin provides instructions when the rear parking aid sensor provides false warnings, is missing from the rear bumper, or a warning is displayed for the rear parking aid system. Read More »
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning. Read More »
This bulletin provides information pertaining to the warning message "Front/rear parking aid: sensor view restricted because of environmental factors. No obstacle warning" accompanied by one of the following DTCS B107BF0 or B10FCF0. Read More »
This bulletin provides instructions for when the acoustical and optical parking system is in operative. The message "Parking Aid: Malfunction!" is displayed and the DTC B107A16 is present. Read More »
This bulletin contains instructions for addressing the issue when the parking assist will intermittently alert the customer to an obstruction and the sensors look 'pushed in'. Read More »
This bulletin provides instructions when the rear parking aid sensor provides false warnings, is missing from the rear bumper, or a warning is displayed for the rear parking aid system. Read More »
This bulletin contains instructions for creating a PSS record when DTC C12D5FA is stored and the driver assist systems are inoperable and a warning message is displayed. Read More »
This bulletin contains instructions for addressing the issue when the parking assist will intermittently alert the customer to an obstruction and the sensors look 'pushed in'. Read More »
This bulletin contains repair instructions for when one of the following DTCs is logged B127C04, B127D04, B127E04, B127F04, and B200FFA with a fogged overhead camera. Read More »
This bulletin contains instructions for creating a PSS record when DTC C12D5FA is stored and the driver assist systems are inoperable and a warning message is displayed. Read More »
This bulletin provides information for instances when the coolant warning light is on or the coolant pump has been replaced due to a coolant leak. Read More »
This bulletin contains instructions for when the rear lid is closed but the lights on the rear bumper do not switch over to the main lights on the rear lid. Read More »
This information bulletin states to remove the car wash bristle and advise the customer to go somewhere else to prevent it from occurring again. Read More »
This bulletin contains information for when the messages appear in the instrument cluster about the high beam assist and/or traffic sign detection with DTC C12B3FD. Read More »
This bulletin provides instructions for when faint images appear on the windshield from the production sticker, or an image of the suction cups used to install the windshield in production. Read More »
This bulletin provides information for when the customer reports a wind noise, a water drip, or if the sunroof opening perimeter seal is distorted or not flush with the roof panel. Read More »
This bulletin provides instructions for when a customer reports concerns with the sunroof opening permeter seal is generating noise, dripping water, or if the seal is distorted and/or not flush with the roof panel. Read More »
This bulletin describes how to modify the sunroof frame if the sunroof glass panel or sunroof frame require replacement, as replacement components have been updated. Read More »
This bulletin provides information for when the central locking/parking brake warning, or alarm sounds, or if there are exterior mirror issues. DTCs B122D29, U122800, and/or B14FF29 may be stored. Read More »
This bulletin advises that the window washer pump may become blocked due to frozen washer fluid; one more more DTCs may be present: DTCs B126101, B126111, or B126113. Read More »
This bulletin provides information for when the air conditioning system does not cool the cabin and DTCs P053000 and/or P251500 are present. Read More »
This informational bulletin states to delete the DTCs and not replace parts for when there is a malfunction message and DTC B130474 and B130574 are sporadically stored. Read More »
This informational bulletin states to delete the DTCs and not replace parts for when there is a malfunction message and DTC B130474 and B130574 are sporadically stored. Read More »
This informational bulletin states to delete the DTCs and not replace parts for when there is a malfunction message and DTC B130474 and B130574 are sporadically stored. Read More »
This bulletin provides information for when there is a seat belt warning, or a pre-sense warning that appears sporadically while driving; DTC B101C07 is stored in the airbag module. Read More »
This informational bulletin states to delete the DTCs and not replace parts for when there is a malfunction message and DTC B130474 and B130574 are sporadically stored. Read More »
This bulletin provides information for when the luggage compartment lid cannot be closed using the button(s) in the luggage compartment trim. Read More »
This bulletin contains repair instructions for when there is rumbling, squeaking, creaking or similar noises from the front end when driving on uneven roads. Read More »
This information bulletin states to remove the car wash bristle and advise the customer to go somewhere else to prevent it from occurring again. Read More »
This bulletin contains instructions for addressing the issue when the parking assist will intermittently alert the customer to an obstruction and the sensors look 'pushed in'. Read More »
This bulletin provides information for when the luggage compartment lid cannot be closed using the button(s) in the luggage compartment trim. Read More »
This bulletin provides instructions for when a vibration is felt in the floor, seat, footwell, pedals or steering wheel while driving at highway speeds from 55 - 80 mph. Read More »
This bulletin contains repair instructions for when there is rumbling, squeaking, creaking or similar noises from the front end when driving on uneven roads. Read More »
This bulletin requests that technicians create a record in the Pending Service Solutions database in instances where there is noise from the backrest of the front seat. Read More »
This bulletin provides information for when the starter battery is discharged, and the vehicle cannot be started due to the front adjustment seat switch becoming jammed. Read More »
This bulletin advises to replace the electronics control module manufactured between 3/16/2019 - 5/22/2019 when sound from all sources will not play in the vehicle. Read More »
This Pending service solutions requests that technicians create a PSS record for instances where a yellow check engine lamp is intermittently displayed upon start with DTC U014000or U110100 is sporadically stored. Read More »
This bulletin provides information for when an unexpected Audi presense front intervention such as a front end warning, a warning jolt, partial braking, or emergency braking occurs and a warning appears in the instrument cluster and ... Read More »
This bulletin contains instructions for creating a PSS record when DTC C12D5FA is stored and the driver assist systems are inoperable and a warning message is displayed. Read More »
This bulletin provides instructions for when the lane change assist/intersection assist is sporadically not working and DTC B200FF9 is present in either the lane change assist control modules, or the corner radar control modules. Read More »
This bulletin provides instructions for when the red coolant temperature is displayed in the instrument cluster and the engine fans are running bu the coolant temperature gauge does not display an excessively high temperature, or the MIL ... Read More »
This bulletin contains instructions for creating a PSS record when DTC C12D5FA is stored and the driver assist systems aer inoperable and a warning message is displayed. Read More »
This bulletin provides information for when the individual overhead view cameras are inoperative, the picture is blurry or fogged up, DTCs B200FFA, B127C04, C12AE02. Read More »
This bulletin contains repair instructions for when one of the following DTCs is logged B127C04, B127D04, B127E04, B127F04, and B200FFA with a fogged overhead camera. Read More »
This bulletin states that it takes about 20 seconds after switching the ignition on for the Audi Pre Sense symbol advising that "Audi pre sense not available at the moment" Read More »
This bulletin contains instructions for when the head up display cannot be turned on, and the message "the selected system is currently unavailable" is displayed periodically on the MMI display. The 12v battery may be drained. Read More »
This bulletin provides information when there is no diagnostics communication to the telematics control module in vehicles with ConBox low; DTC U142100. Read More »
This informational bulletin states that for DTC U101400 to not perform any repairs and that this does not affect the customer or their experience. Read More »
This bulletin provides information to address when the Audi connect "User management" screen is greyed out, and the customer cannot complete the key user pairing. OR the SOS emergency button is red or flashing read. Read More »
This bulletin describes the ways in which a variety of Audi vehicles connect to Apple Wireless CarPlay, and the methods to troubleshoot connection concerns. Read More »
This bulletin describes the proper method to address various noises coming from the B-pillar or door area on rough roads or when vehicle flexes. Read More »
This bulletin advises that techs should document the specific o-ring seal that is replaced if a refrigerant leak is found and caused by the o-ring seal. Read More »
This bulletin explains that the steering wheel may warm up while being held leading to the impression that he steering wheel isn't heating evenly. Read More »
This informational bulletin states that for DTC U101400 to not perform any repairs and that this does not affect the customer or their experience. Read More »
This bulletin describes an error which may arise due to a bug in the software of a customer's phone, which causes the Apple CarPlay screen to appear blank, and for audio drop-outs. Read More »
This bulletin contains repair instructions for when the warning message "SOS Emergency call function deactivated" is seen in the instrument cluster. Read More »
This technical service bulletin informs the reader that damage to the appearance of the leather steering wheel caused by outside influence is not covered under warranty. Read More »
This informational bulletin contains instructions for when a non-plus sized iPhone heats up while wirelessly charging and the CarPlay screen may appear frozen. Read More »
This bulletin contains instructions for additional reporting requirements for safety related inquiries (airbag/seatbelts, accidents, fire and overheat damage). Read More »
This informational contains an explanation for when the customer hears creaking noises when braking at almost standstill (crawling when pulling away or briefly before standstill). Read More »
This bulletin advises the technician to create a PSS record for when after a software update, with active privacy settings, e.g. "Use of vehicle position", the pop-up window is shown with every ignition cycle. Read More »
This bulletin contains instructions for creating a PSS record when DTC C12D5FA is stored and the driver assist systems are inoperable and a warning message is displayed. Read More »
This bulletin contains repair instructions for when one of the following DTCs is logged B127C04, B127D04, B127E04, B127F04, and B200FFA with a fogged overhead camera. Read More »
This bulletin contains instructions for creating a PSS record when DTC C12D5FA is stored and the driver assist systems aer inoperable and a warning message is displayed. Read More »
This bulletin contains information on how to fix a clunking or rattling noise heard from the rear suspension when the vehicle is driven over bumps. Read More »
This informational bulletin contains instructions for when a phone is connected to the vehicle via Bluetooth, one of the following conditions occurs when the user searches for a contact name in the MMI address book (by using the MMI ... Read More »
Reminders Section: Changed Testing verbiage to: - Guided Fault Finding must be used, session must be completed and sent to GFF Paperless - Total PDI Test must be completed prior to any other work involving the scan tool (special ... Read More »
This bulletin provides information for when high beam assist or traffic sign detection limited, DTC 12B3FD may be stored in the DAS control module. Read More »
This bulletin provides information for when the SOS Emergency call function deactivated message appears in the instrument cluster; DTC U153E00 is stored in the telematics module. Read More »
This bulletin provides information related to maintaining the 12V Lead-acid or AGM battery when a vehicle is parked for a prolonged period of time. Read More »
This bulletin provides instructions for when the Audi connect "User management" option is greyed out, or the SOS emergency button is red or flashing red. Read More »
This bulletin provides instructions for when the red coolant temperature is displayed in the instrument cluster and the engine fans are running bu the coolant temperature gauge does not display an excessively high temperature, or the MIL ... Read More »
This bulletin advises that DTCs B18BEF0 and/or B18BDF0 may arise due to a sensitive diagnostic routine; codes can be cleared and no parts require replacement. Read More »
This bulletin states that an SOS malfunction accompanied by DTCs U142100, U164200, and/or U122C100 my be stored erroneously and the ETCs should be cleared. Read More »
This bulletin states to replace the instrument cluster control module when DTCs B11E101 and B11E201 are stored in the instrument cluster and night vision respectively. Read More »
This bulletin describes the ways in which a variety of Audi vehicles connect to Apple Wireless CarPlay, and the methods to troubleshoot connection concerns. Read More »
This bulletin contains instructions for submitting a customer registration form for the Audi phone box to the customer's Mobile Network Operator. Read More »
This bulletin contains instructions for addressing the issue when the parking assist will intermittently alert the customer to an obstruction and the sensors look 'pushed in'. Read More »
This bulletin states to reset the MMI system and then create a PSS record if it sporadically is no longer possible to change radio stations. Read More »
This bulletin contains repair instructions for when there is sporadic or permanent no sound on any source (radio, media, navigation, and phone). Read More »
This bulletin provides information for when Apple CarPlay pops up or takes over audio without user intervention in vehicles with the Audi Smartphone Interface. Read More »
This bulletin advises that the MMI screen may freeze, or go blank and then restart when a special character like a symbol or emoticon is used in the name field for contact(s). Read More »
This bulletin describes an error which may arise due to a bug in the software of a customer's phone, which causes the Apple CarPlay screen to appear blank, and for audio drop-outs. Read More »
This bulletin describes an error which may arise due to a bug in the software of a customer's phone, which causes the Apple CarPlay screen to appear blank, and for audio drop-outs. Read More »
This bulletin advises the technician to create a PSS record for when after a software update, with active privacy settings, e.g. "Use of vehicle position", the pop-up window is shown with every ignition cycle. Read More »
This informational bulletin contains instructions for when the message "Audi pre sense currently restricted. See owner's manual" is displayed in the instrument cluster without DTCs. Read More »
This bulletin contains repair instructions for when there is an oil leak from the rear of the vehicle and the sealing caps are missing from the pressure limiting valves. Read More »
This information bulletin states to remove the car wash bristle and advise the customer to go somewhere else to prevent it from occurring again. Read More »
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning. Read More »
The Pre-Delivery Inspection Technician Reference Document is designed to be a resource used in hand with the Pre-Delivery Inspection Checklist (PDI). Read More »
This bulletin explains that the steering wheel may warm up while being held leading to the impression that he steering wheel isn't heating evenly. Read More »
This bulletin advises the technician to create a PSS record for when after a software update, with active privacy settings, e.g. "Use of vehicle position", the pop-up window is shown with every ignition cycle. Read More »
This bulletin contains instructions for creating a PSS record when DTC C12D5FA is stored and the driver assist systems are inoperable and a warning message is displayed. Read More »
This bulletin contains instructions for creating a PSS record when DTC C12D5FA is stored and the driver assist systems aer inoperable and a warning message is displayed. Read More »
This bulletin provides information when there are scratches, or a coating on the cover of the instrument cluster, or particles in the housing. Read More »
This Pending Service Solution (PSS) requests that technicians enter a record into the PSS Database in instances where there is noise from the backrest of the front seat. Read More »
This bulletins provides information when the radiator fans, alarm, or wipers are not working; DTC P048000, _048100, U063200, U063300, U10F300, U10A400, P10EF00. Read More »
This bulletin provides information for instances when the coolant warning light is on or the coolant pump has been replaced due to a coolant leak. Read More »
This bulletin provides information when there is no diagnostics communication to the telematics control module in vehicles with ConBox low; DTC U142100. Read More »
This bulletin provides information for when the message "Electrical system: fault" is in the instrument cluster - event memory B200094 (00C4). Read More »
This bulletin advises to replace the membrane in the breather line in instances where oil found in the engine compartment, front end, and around the filler cap, or a smell is detected. Read More »
This bulletin advises to replace the electronics control module manufactured between 3/16/2019 - 5/22/2019 when sound from all sources will not play in the vehicle. Read More »
This Pending service solutions requests that technicians create a PSS record for instances where a yellow check engine lamp is intermittently displayed upon start with DTC U014000or U110100 is sporadically stored. Read More »
Affected Engine Control Software does not disable the warm-up correction factor following engine start and warm-up as described in Auxiliary Emission Control Device (AECD) documentation. Read More »
