Technical Service Bulletins (TSBs) for the 2019 XT4 are official communications between Cadillac & their dealerships that describe processes for troubleshooting or fixing certain common problems.
All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This service bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear. Read More »
This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. Read More »
This service bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear. Read More »
This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. Read More »
This engineering information (EI) closure ends the need for information from the field on a stick-slip type condition felt in steering wheel at highway speeds. Read More »
This engineering information bulletin is requesting to gather information from the field to determine a root cause for a condition of a stick-Slip Type Condition Felt in Steering Wheel at Highway Speeds. Read More »
This engineering informational bulletin is requesting to gather information from the field to determine a root cause for a condition of a stick-Slip Type Condition Felt in Steering Wheel at Highway Speeds. Read More »
This Preliminary Information communication provides information to the technician with additional information on the functionality of Lane Keep Assist. Read More »
This technical bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear. Read More »
This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts that are being performed on customer?s vehicles that exhibit vibration conditions without utilizing ... Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This service bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This Preliminary information communicates that when removing the fuel line jumper hose care should be taken to be sure the line is reinstalled correctly to avoid a no/low fuel pressure situation. Read More »
This service bulletin provides information to dealership personnel that after performing a brake inspection, brake pad replacement, or any other repair that requires the caliper piston to be reseated may be causing DTC C05B0 to falsely ... Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This Preliminary information communicates the potential for condensation to freeze up inside the Crankcase Pressure Sensor causing dtc P04FB to set. Read More »
This engineering information (EI) bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards a brake fluid leak being detected with DTC C2A22 Symptom 00 Set. Read More »
This Preliminary information communicates to the dealer a GDS2 error message (see below) might occur when trying to deactivate the boost system when preforming the hydraulic bleed procedure. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing a brake squeal Noise in cold weather conditions. Read More »
Customer Satisfaction Program - Certain vehicles under certain conditions when traveling at low speed from a stop, the power brake assist system may not activate. Read More »
This service bulletin provides information to dealership personnel that after performing a brake inspection, brake pad replacement, or any other repair that requires the caliper piston to be reseated may be causing DTC C05B0 to falsely ... Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester ... Read More »
This engineering information (EI) bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards a brake fluid leak being detected with DTC C2A22 Symptom 00 Set. Read More »
This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D Read More »
This service bulletin provides policy information on warranty administration guidelines for multiple repairs with independent causes (GM Canada Dealers Only). Read More »
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Read More »
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy. Read More »
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage. Read More »
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This technical bulletin provides a procedure to program the TCM to correct the customers concern of a MIL Illuminated, Vehicle wont go above 25 mph and/or 1-2 Shifts feel like a momentary tie up. Read More »
This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record ... Read More »
This Preliminary information communicates a possible BCM and/or circuit 5985 concern if DTC P0747 sets during engine shut down when the transmission is in park or neutral when no hydraulic/mechanical transmission concerns are present. Read More »
This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels ... Read More »
This informational bulletin explains to the tech on how to order a new fuel injector by matching the part number on the part and ordering it from the EPC. Read More »
This technical bulletin provides a diagnostic procedure to correct a condition of Vehicle Will Not Start and/or Starter Inoperative or Not Disengaging. Read More »
This Preliminary information communicates a possible BCM concern if DTC P0747 sets during engine cranking when the transmission is in park. Read More »
This Preliminary information communicates a possible BCM concern if DTC P0747 sets during engine cranking when the transmission is in park. Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to engine oil found under their vehicle. Read More »
This Preliminary information communicates to the technician a service Diagnostic / Repair tip to avoid causing the crankshaft sprocket to disengage from the crankshaft during crankshaft balancer removal. Read More »
This informational bulletin explains Unscheduled Supplemental Services (including Flushing Services and Additives) and the Proper use of GM Simplified Maintenance Schedules. Read More »
This Bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This engineering informational bulletin is requesting information from the field on no crank / no start issue resulting in a starter replacement due to the solenoid overheating. Read More »
This Preliminary information communicates to dealers that if the SES/MIL light is on and there are multiple communication codes stored to inspect the engine harness between the power steering gear and the rear of the transmission case. Read More »
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards. Read More »
This Preliminary information communicates the possibility of a rattle noise that can occur from the timing cover area due to sticking timing chain tensioner. Read More »
N192264170 - SUB - Certain 2019 model year Cadillac XT4 vehicles equipped with a 2.0L. 4-Cylinder Turbo engine do not properly clear the permanent status for EBCM DTC U0100 (loss of communications with ECM) or U0101 (loss of ... Read More »
This Preliminary information communicates the possibility of a reduced power message with dtc p2101 and/or p1516 due to potential throttle body issue. Read More »
This Preliminary information communicates the possibility of a rattle noise that can occur from the timing cover area due to sticking timing chain tensioner. Read More »
This Preliminary information communicates to the dealer that a customer may comment that their MIL is illuminated due to a P0299 set current or in history. Read More »
This technical bulletin provides a procedure to replace the fluid cooler exchanger and the torque converter or transmission and torque converter, depending on if the exchanger leaked into the transmission fluid. Read More »
This engineering information (EI) bulletin is requesting information from the field on the malfunction indicator lamp (MIL) illuminating to develop/validate a field fix. Read More »
This Preliminary information communicates to the dealer an issue where the vehicle's engine may crank over unprompted and not start afterward. Read More »
The Preliminary Information communication advises the technician that there is a part restriction for the 2.0L LSY engine. The dealer technician is advised to call the GM Product Quality Center for further assistance. Read More »
This technical bulletin provides a procedure to replace the fluid cooler exchanger and the torque converter or transmission and torque converter, depending on if the exchanger leaked into the transmission fluid. Read More »
This technical bulletin provides a procedure to program the TCM to correct the customers concern of a MIL Illuminated, Vehicle wont go above 25 mph and/or 1-2 Shifts feel like a momentary tie up. Read More »
This technical bulletin provides a procedure to correct the condition of Check Engine Lamp Illuminated on Driver Information Center (DIC) with DTC P0451 Set. Read More »
This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels ... Read More »
This Preliminary information communicates to dealers? information related to a Malfunction Indicator Lamp (MIL) Illuminated due to a U0672 setting. Advises the technician to perform Electric Engine Coolant Pump connection inspections. Read More »
This engineering information (EI Lite) is requesting technicians use the FPR App process in regard to finding coolant leaking around the Coolant Control Valve (CCV). Read More »
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This service bulletin explains the difference in oil filters for gas engines with new oil pump control systems and the possibilities of what may happen using the incorrect filter. Read More »
The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay. Read More »
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This informational bulletin advised the technician that the engine and related parts will be debited if found that the tech didn't properly prepare the engine block from dirt and debris in bolt holes or if found that the block was damaged ... Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This service bulletin provides information to dealership personnel on automatic transmission shift and engine driveability concerns and/or MIL ON due to aftermarket oil bath air filter use. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts. Read More »
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This service bulletin advises the tech that the rotational Clicking Noise Heard After Engine Shut Down may be normal characteristics of the vehicle. Read More »
This Preliminary information communicates that a rotational clicking noise heard after engine shut down is a design characteristic and no repairs should be attempted. Read More »
This service bulletin provides information on a normal characteristic of a transmission that will not shift into overdrive range during cold ambient temperatures. Read More »
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global ... Read More »
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system. Read More »
This technical bulletin advises the technician to rest the MIL and diagnose additional DTCs for why the code is setting and disabling the start/stop system. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts. Read More »
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of MIL Illuminated with Multiple Fuel Trim and/or Oxygen Sensor Codes Set. Read More »
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system. Read More »
This Preliminary information communicates the possibility of the engine running hot or overheating with no DTC's due to inaccurate coolant temperature sensor located on the coolant pump outlet pipe. Read More »
This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D Read More »
This service bulletin provides a procedure to install a winter grille cover to correct the customer concerns of Poor Engine Performance in Extremely Cold Weather Conditions, Charge Air Cooler Icing, Malfunction Indicator Lamp (MIL) ... Read More »
This service bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area. Read More »
This service bulletin provides a repair procedure to correct a customer concern of Whistle or Hoot/Woot Noise Heard from Under Vehicle in Cold Ambient Temperatures. Read More »
This Preliminary information communicates the possibility of a inaccurate #1 Coolant Temperature Sensor causing the engine to run hot or overheat with possible over temperature message displayed on ... Read More »
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy. Read More »
This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global ... Read More »
This Preliminary information communicates the possibility of a engine oil leak that may occur at the cam carrier gasket T joint area due to improper amount of sealer be applied Read More »
This engineering information (EI) closure ends the need for information from technicians/field in regards to engine oil found under their vehicle. Read More »
This Preliminary information communicates the possibility of DTC P3075 being set current or history due to low coolant level or air trapped in cooling system. Read More »
This Preliminary information communicates to the dealer a GDS2 error message (see below) might occur when trying to deactivate the boost system when preforming the hydraulic bleed procedure. Read More »
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to a check engine lamp illuminated and DTC P0451 set. Read More »
This informational bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage. Read More »
This Preliminary information communicates the possibility of DTC P3075 being set current or history due to low coolant level or air trapped in cooling system. Read More »
This Preliminary information communicates the possibility of dtc P3075 being set current or history due to low coolant level or air trapped in cooling system. Read More »
This technical bulletin provides a procedure to replace the engine coolant flow control valve if found the cause of the customers concern of Engine Overheating or MIL Illuminated. Read More »
This Preliminary information communicates the possibility of dtc P0238 setting after service work due to the Turbocharger Air Pressure Sensor wiring connector and AC Refrigerant wiring connectors be swapped accidently diring reassembly of ... Read More »
This Preliminary information communicates that a rotational clicking noise heard after engine shut down is a design characteristic and no repairs should be attempted. Read More »
This technical bulletin provides a procedure to replace the fluid cooler exchanger and the torque converter or transmission and torque converter, depending on if the exchanger leaked into the transmission fluid. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM)
This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D Read More »
This service bulletin provides a service procedure to correct a customer concern of a Malfunction Indicator Lamp (MIL) Illuminated - DTC P3075 Set. Read More »
This service bulletin provides repair information for dealers/technicians to correct a customer concern of a Malfunction Indicator Lamp Illuminated with DTC P26BB Set. Read More »
This service bulletin provides a repair procedure to correct a customer concern of a Malfunction Indicator Lamp (MIL) Illuminated - DTC P3055 Set. Read More »
This Preliminary information communicates to the technician a service Diagnostic / Repair tip to avoid causing the crankshaft sprocket to disengage from the crankshaft during crankshaft balancer or cam drive system component related ... Read More »
This Preliminary information communicates to the technician a service Diagnostic / Repair tip to avoid causing the crankshaft sprocket to disengage from the crankshaft during crankshaft balancer removal. Read More »
This service bulletin provides a service procedure to correct a customer concern of a Malfunction Indicator Lamp (MIL) Illuminated - DTC P3075 Set. Read More »
ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY
This informational bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area. Read More »
This informational bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area. Read More »
N182205890-02 - Service Update. Certain vehicles may have a condition where some capacitors used on the purge pump printed circuit board (PCB), may have unknown performance. Read More »
This informational bulletin advises of a new fuel injection kit used for decarbonizing the intake valves, and explains how toptier fuels should be used to reduce carbon build up. Read More »
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy. Read More »
This informational bulletin provides information to dealership personnel for new vehicles with less than 1,000 miles that may not pass California smog inspection or smog inspection in other states. Read More »
Service Update. Certain vehicles may have a condition where some capacitors used on the purge pump printed circuit board (PCB), may have unknown performance. These suspect capacitors are used in multiple locations on the PCB. Read More »
Service Update - Revised Condition Statement. Certain vehicles may have a condition where some capacitors used on the purge pump printed circuit board (PCB), may have unknown performance. Read More »
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)
This Preliminary information communicates the potential for condensation to freeze up inside the Crankcase Pressure Sensor causing dtc P04FB to set. Read More »
This Preliminary information communicates the potential for condensation to freeze up inside the Crankcase Pressure Sensor causing dtc P04FB to set. Read More »
This technical bulletin provides a procedure to correct the condition of Check Engine Lamp Illuminated on Driver Information Center (DIC) with DTC P0451 Set. Read More »
This Preliminary information communicates to dealers? information related to a Malfunction Indicator Lamp (MIL) Illuminated due to a U0672 setting. Advises the technician to perform Electric Engine Coolant Pump connection inspections. Read More »
This Preliminary information communicates that when removing the fuel line jumper hose care should be taken to be sure the line is reinstalled correctly to avoid a no/low fuel pressure situation. Read More »
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This technical bulletin provides a procedure to correct the condition of Check Engine Lamp Illuminated on Driver Information Center (DIC) with DTC P0451 Set. Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester ... Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
N182205890-02 - Service Update. Certain vehicles may have a condition where some capacitors used on the purge pump printed circuit board (PCB), may have unknown performance. Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
Customer Satisfaction Program. Certain vehicles may have a condition in which the fuel gauge does not accurately reflect the amount of fuel in the tank (may be overfilled or underfilled). Read More »
This Preliminary information communicates to the dealer that a customer may comment that their MIL is illuminated due to a P0299 set current or in history. Read More »
This Preliminary information communicates to the dealer an issue where the vehicle's engine may crank over unprompted and not start afterward. Read More »
This engineering informational bulletin is requesting information on product issue with the Evap/Fuel Line Connections and the engineer is requesting pictures. Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set. Read More »
This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels ... Read More »
This informational bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier ... Read More »
This informational bulletin explains to the tech on how to order a new fuel injector by matching the part number on the part and ordering it from the EPC. Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
This engineering informational bulletin is requesting information on product issue with the Evap/Fuel Line Connections and the engineer is requesting pictures. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
This service bulletin provides information on a normal characteristic of a transmission that will not shift into overdrive range during cold ambient temperatures. Read More »
This Preliminary information communicates the potential for condensation to freeze up inside the Crankcase Pressure Sensor causing dtc P04FB to set. Read More »
This Preliminary information communicates the possibility of a reduced power message with dtc p2101 and/or p1516 due to potential throttle body issue. Read More »
This Preliminary information communicates the possibility of a reduced power message with dtc p2101 and/or p1516 due to potential throttle body issue. Read More »
This service bulletin advises the tech that the rotational Clicking Noise Heard After Engine Shut Down may be normal characteristics of the vehicle. Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay. Read More »
This Preliminary information communicates to the dealer technician that TAC recommends the utilization of the GDS2 software to aid in diagnosing automatic transmission concerns. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This service bulletin provides information to dealership personnel on automatic transmission shift and engine driveability concerns and/or MIL ON due to aftermarket oil bath air filter use. Read More »
This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. Read More »
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This service bulletin advises the tech that the rotational Clicking Noise Heard After Engine Shut Down may be normal characteristics of the vehicle. Read More »
This service bulletin provides information on a normal characteristic of a transmission that will not shift into overdrive range during cold ambient temperatures. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
This engineering information (EI) closure ends the need to gather further information from technicians in regards to Vehicle Will Not Move When in Drive, Neutral and/or Reverse and DTCs P0746, P0747 Set. Read More »
This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global ... Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to Vehicle Will Not Move When in Drive, Neutral and/or Reverse and DTCs P0746, ... Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This Preliminary information communicates to the dealer technician that TAC recommends the utilization of the GDS2 software to aid in diagnosing automatic transmission concerns. Read More »
This Preliminary Information communication provides information to the technician to not remove the torque converter bolts and start the engine as this may cause damage to the torque converter of the crankshaft on vehicles equipped with ... Read More »
This diagnostic tip advises the tech not to separate the flexplate from the torque convertor or damage my occur if the engine is started while diagnosing for noise from the engine or transmission. Read More »
This service bulletin provides repair information to correct a customer concern of a Service AWD Message in DIC at Ignition On with DTC C056D Set. Read More »
This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. Read More »
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Read More »
This service bulletin provides a repair procedure to correct a customer concern of Whistle or Hoot/Woot Noise Heard from Under Vehicle in Cold Ambient Temperatures. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
This Preliminary information communicates to the technician a service Diagnostic / Repair tip to avoid causing the crankshaft sprocket to disengage from the crankshaft during crankshaft balancer or cam drive system component related ... Read More »
This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global ... Read More »
This informational bulletin provides information on Transmission Adaptive Functions and Correcting Low Mileage Harsh Shifts, Slips, or Flares. Read More »
This informational bulletin provides information on Transmission Adaptive Functions and Correcting Low Mileage Harsh Shifts, Slips, or Flares. Read More »
This technical bulletin provides repair information to correct a customer concern of Blue or Black Screen and Service Rear Vision System Message on Radio Display Shifting into Reverse. Read More »
This informational bulletin provides information on Transmission Adaptive Functions and Correcting Low Mileage Harsh Shifts, Slips, or Flares. Read More »
This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record ... Read More »
This Preliminary information communicates a possible BCM and/or circuit 5985 concern if DTC P0747 sets during engine shut down when the transmission is in park or neutral when no hydraulic/mechanical transmission concerns are present. Read More »
This Preliminary information communicates a possible BCM and/or circuit 5985 concern if DTC P0747 sets during engine shut down when the transmission is in park or neutral when no hydraulic/mechanical transmission concerns are present. Read More »
This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global ... Read More »
This Preliminary information communicates a possible BCM and/or circuit 5985 concern if DTC P0747 sets during engine shut down when the transmission is in park or neutral when no hydraulic/mechanical transmission concerns are present.. Read More »
This Preliminary information communicates a possible BCM concern if DTC P0747 sets during engine cranking when the transmission is in park. Read More »
This Preliminary information communicates a possible BCM concern if DTC P0747 sets during engine cranking when the transmission is in park. Read More »
This Preliminary information communicates a possible BCM concern if DTC P0747 sets during engine cranking when the transmission is in park. Read More »
This informational bulletin advises the tech of a possible normal condition caused when the transmission performs a 1-2 upshift at light throttle and why the D in the PRNDL will flash. Read More »
This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record ... Read More »
This technical bulletin provides a procedure to replace the fluid cooler exchanger and the torque converter or transmission and torque converter, depending on if the exchanger leaked into the transmission fluid. Read More »
This Preliminary information communicates that the transmission assembly, the torque converter assembly, and the Stack Plate Heat Exchanger (Automatic Transmission Fluid Cooler Exchanger) restriction has ended. Read More »
This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record ... Read More »
This Preliminary information communicates that the transmission assembly, the torque converter assembly, and the Stack Plate Heat Exchanger (Automatic Transmission Fluid Cooler Exchanger) will be on restriction for engineering review. Read More »
This technical bulletin provides a procedure to replace the fluid cooler exchanger and the torque converter or transmission and torque converter, depending on if the exchanger leaked into the transmission fluid. Read More »
This Preliminary information communicates that the transmission assembly, the torque converter assembly, and the Stack Plate Heat Exchanger (Automatic Transmission Fluid Cooler Exchanger) will be on restriction for engineering review. Read More »
N182205680-01 - Service Update, Revised Parts, Service Procedure and Warranty Information. Certain vehicles may have been manufactured with a stacked plate heat exchanger (SPHE) that has the potential to develop a leak. Read More »
This technical bulletin provides a procedure to program the TCM to correct the customers concern of a MIL Illuminated, Vehicle wont go above 25 mph and/or 1-2 Shifts feel like a momentary tie up. Read More »
N182205680 - Service Update. Certain vehicles may have been manufactured with a stacked plate heat exchanger (SPHE) that has the potential to develop a leak. Read More »
This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record ... Read More »
This technical bulletin provides a procedure to replace the fluid cooler exchanger and the torque converter or transmission and torque converter, depending on if the exchanger leaked into the transmission fluid. Read More »
This technical bulletin provides a procedure to replace the fluid cooler exchanger and the torque converter or transmission and torque converter, depending on if the exchanger leaked into the transmission fluid. Read More »
This technical bulletin provides a procedure to replace the fluid cooler exchanger and the torque converter or transmission and torque converter, depending on if the exchanger leaked into the transmission fluid. Read More »
This technical bulletin provides a procedure to replace the fluid cooler exchanger and the torque converter or transmission and torque converter, depending on if the exchanger leaked into the transmission fluid. Read More »
This technical bulletin provides a procedure to program the TCM to correct the customers concern of a MIL Illuminated, Vehicle wont go above 25 mph and/or 1-2 Shifts feel like a momentary tie up. Read More »
This technical bulletin provides a procedure to replace the fluid cooler exchanger and the torque converter or transmission and torque converter, depending on if the exchanger leaked into the transmission fluid. Read More »
Service Update - Certain vehicles may have a condition where the customer may be able to shift out of park with an expired latent fault mode counter. Read More »
POWER TRAIN:MANUAL TRANSMISSION:FLOOR SHIFT ASSEMBLY
Service Update - Certain vehicles may have a condition where the customer may be able to shift out of park with an expired latent fault mode counter. Read More »
The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them. Read More »
This technical bulletin provides a procedure to program the TCM to correct the customers concern of a MIL Illuminated, Vehicle wont go above 25 mph and/or 1-2 Shifts feel like a momentary tie up. Read More »
This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. Read More »
POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
This Preliminary information communicates to the dealer technician that TAC recommends the utilization of the GDS2 software to aid in diagnosing automatic transmission concerns. Read More »
POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This preliminary information (PI) provides information om Service Programming System (SPS) Error Codes (E4398, E4399, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491 or E6961). Read More »
This Preliminary information communicates the possibility of a reduced power message with dtc p2101 and/or p1516 due to potential throttle body issue. Read More »
This Preliminary information communicates the possibility of a reduced power message with dtc p2101 and/or p1516 due to potential throttle body issue. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This service bulletin advises the tech that the rotational Clicking Noise Heard After Engine Shut Down may be normal characteristics of the vehicle. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This service bulletin provides information to dealership personnel that after performing a brake inspection, brake pad replacement, or any other repair that requires the caliper piston to be reseated may be causing DTC C05B0 to falsely ... Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Coaxial Related Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This service bulletin provides repair information to correct a customer concern of Blue or Black Screen and Service Rear Vision System Message on Radio Display Shifting into Reverse. Read More »
This service bulletin provides repair information to correct a customer concern of Head Up Display (HUD) Blank, Non-Responsive to Brightness, Aim, or Page Controls, DTC U1518 Set. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This technical bulletin advises the technician to rest the MIL and diagnose additional DTCs for why the code is setting and disabling the start/stop system. Read More »
This technical bulletin provides a procedure to correct the condition of Check Engine Lamp Illuminated on Driver Information Center (DIC) with DTC P0451 Set. Read More »
This preliminary information (PI) provides information om Service Programming System (SPS) Error Codes (E4398, E4399, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491 or E6961). Read More »
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them. Read More »
This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with ... Read More »
This service bulletin provides repair information to correct a customer concern of Head Up Display (HUD) Blank, Non-Responsive to Brightness, Aim, or Page Controls, DTC U1518 Set. Read More »
This Preliminary information communicates and issue with the memory seat module waking up the low speed GM lan bus and causing a battery draw. Read More »
This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. Read More »
This service bulletin provides repair information to correct a customer concern of Blue or Black Screen and Service Rear Vision System Message on Radio Display Shifting into Reverse. Read More »
This Preliminary information communicates a process to correct the concern of Unable to contact OnStar after the 3G EOL on 2015-2022 model year vehicles in the United States. Read More »
This Preliminary information communicates and issue with the memory seat module waking up the low speed GM lan bus and causing a battery draw. Read More »
This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. Read More »
This Preliminary information communicates a condition where the Video Processing Control Module is not able to be programmed to the vehicle. This PI offeres a couple workarounds while Engineering evaluates the concern. Read More »
This Preliminary information communicates a condition where the Video Processing Control Module is not able to be programmed to the vehicle. This PI offeres a couple workarounds while Engineering evaluates the concern. Read More »
This service bulletin provides a repair procedure to correct a customer concern of a Malfunction Indicator Lamp (MIL) Illuminated - DTC P3055 Set. Read More »
This Preliminary information communicates a condition where the Video Processing Control Module is not able to be programmed to the vehicle. This PI offeres a couple workarounds while Engineering evaluates the concern. Read More »
This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set. Read More »
This service bulletin provides repair information to correct a customer concern of Blue or Black Screen and Service Rear Vision System Message on Radio Display Shifting into Reverse. Read More »
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy. Read More »
This Preliminary information communicates and issue with the memory seat module waking up the low speed GM lan bus and causing a battery draw. Read More »
This Preliminary information communicates a concern where the radio will reboot when adjusting the volume intermittently and that engineering is investigating Read More »
This service bulletin provides information and a service procedure for dealers/technicians on OnStar Over the Air Update for TTY / TDD Operation and Continuous Improvement Changes. Read More »
The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them. Read More »
This Preliminary information communicates to the dealer that a customer may comment that the MIL light is illuminated. The technician may find P1098 and/or P26BB set current or history. Read More »
This bulletin provides information on the Transport Mode On Message Being Displayed in the Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the Transport Mode message ON and OFF. Read More »
This technical bulletin provides repair information to correct a customer concern of SD Card Removed Error Message Displayed on Instrument Panel Cluster (IPC). Read More »
This bulletin provides information on the Transport Mode On Message Being Displayed in the Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the Transport Mode message ON and OFF. Read More »
This Preliminary information communicates to the dealer that a customer may comment that the MIL light is illuminated. The technician may find P1098 and/or P26BB set current or history. Read More »
This Preliminary information communicates and issue with the memory seat module waking up the low speed GM lan bus and causing a battery draw. Read More »
This technical bulletin provides repair information to correct a customer concern of Blue Screen and Service Rear Vision System Message on Radio Display. Read More »
This technical bulletin provides a diagnostic procedure to correct a condition of Vehicle Will Not Start and/or Starter Inoperative or Not Disengaging. Read More »
This Preliminary information communicates a possible BCM concern if DTC P0747 sets during engine cranking when the transmission is in park. Read More »
This Preliminary information communicates to the dealer that a customer may comment that the MIL light is illuminated. The technician may find P1098 and/or P26BB set current or history. Read More »
This informational bulletin provides information for dealers/technicians on Accessory Rear Seat Infotainment (RSI) Shuts Off, Coinciding with Closing of Door or Liftgate. Read More »
This Preliminary information communicates a work around when only 11 digit PUN (Part Unique Number) is seen on Service Solenoid Body Assembly. Read More »
This engineering informational bulletin is requesting information from the field on no crank / no start issue resulting in a starter replacement due to the solenoid overheating. Read More »
This Preliminary information communicates to the dealer that a customer may comment that the MIL light is illuminated. The technician may find P1098 and/or P26BB set current or history. Read More »
This engineering information bulletin is requesting information from the field on no crank / no start issue resulting in a starter replacement due to the solenoid overheating. Read More »
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards. Read More »
This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. Read More »
This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. Read More »
This Preliminary information communicates the possible setting of B101D-39 in the OnStar module and advises of over the air software update to resolve the concern. Read More »
This Preliminary information communicates to the dealer that a customer may comment that the MIL light is illuminated. The technician may find P1098 and/or P26BB set current or history. Read More »
This technical bulletin provides repair information to correct a customer concern of Intermittent OnStar Inoperative, DTC B101D-39, Red LED and Clock Date Time Inaccurate. Read More »
This Preliminary information communicates advises the technician that the ECM part number will be placed on a parts restriction through the General Motors Technical Assistance Center. Read More »
This preliminary information bulletin provides information om Service Programming System (SPS) Error Codes E4398, E4399, E4403, M4404, M4413, E4414, E4423, E4491 or E6961). Read More »
This engineering information (EI) bulletin is requesting information from the field on the malfunction indicator lamp (MIL) illuminating to develop/validate a field fix. This version updates the Correction steps. Read More »
This informational bulletin provides information for dealers/technicians on Information on Head-Up Display (HUD) on Vehicles Model Year 2017 and Newer Has Rotational Feature that Allows for Adjusting of the Angle of the HUD Image. Read More »
This bulletin explains the labor operation numbers used for submitting warranty claims for module reprogramming and not when replacing a module. Read More »
This Preliminary information communicates advises the technician that the ECM part number will be placed on a parts restriction through the General Motors Technical Assistance Center. Read More »
Service Update. Certain 2019 model year Cadillac XT4 vehicles may discharge their battery after a remote start event and then one of the following happens: Remote shutdown, or time out of remote start, or entering the vehicle and pushing ... Read More »
This Preliminary information communicates the possibility of the wastegate retaining clip on the wastegate lever falling off and causing dtc p0299. Read More »
This technical bulletin provides repair information to correct a customer concern of Blue Screen and Service Rear Vision System Message on Radio Display. Read More »
This Preliminary information communicates that Some technicians may find DTC P0496 set in the ECM. Diagnostics should be completed to determine if the DTC is the result of an air leak in the purge system. Read More »
This informational bulletin provides information on OnStar? VCIM is currently restricted parts. By working closely with our dealers and technicians, through the part restriction process, the General Motors team will gain a better ... Read More »
N192212140 - Service Update. Certain 2vehicles may discharge their battery after a remote start event and then one of the following happens: Remote shutdown, time out of remote start, entering the vehicle and pushing the ignition button ... Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer. Read More »
This Preliminary information communicates during a vehicle remote start, if the temperature is Currently the mode command during a remote start for temperature Read More »
This Preliminary information communicates the possible setting of B101D-39 in the OnStar module and advises of byte info to retrieve while engineering completes further investigation. Read More »
This technical bulletin provides a procedure to check the rearview mirror coax connector for looseness by disconnecting and reconnecting the electrical connector and to correct the customers concern for the rearview mirror video screen ... Read More »
This bulletin explains the labor operation numbers used for submitting warranty claims for module reprogramming and not when replacing a module. Read More »
This Preliminary information communicates advises the technician that the ECM part number will be placed on a parts restriction through the General Motors Technical Assistance Center. Read More »
This Preliminary information communicates the possible setting of B101D-39 in the OnStar module and advises of byte info to retrieve while engineering completes further investigation. Read More »
This Preliminary information communicates the possible setting of B101D-39 in the OnStar module and advises of byte info to retrieve and of engineering investigation. Read More »
This technical bulletin provides repair information to correct a customer concern of Intermittent or Continuous Horn Blowing, Horn Activation Sensitive to the Touch. Read More »
This technical bulletin provides repair information to correct a customer concern of Intermittent or Continuous Horn Blowing, Horn Activation Sensitive to the Touch. Read More »
This Preliminary information communicates a GM part number for reflective high temperature heat or insulating tape when repairing wiring harnesses. Read More »
N192212140 - Service Update. Certain 2vehicles may discharge their battery after a remote start event and then one of the following happens: Remote shutdown, time out of remote start, entering the vehicle and pushing the ignition button ... Read More »
This technical bulletin provides a diagnostic procedure to correct a condition of Vehicle Will Not Start and/or Starter Inoperative or Not Disengaging. Read More »
This Preliminary information communicates the possibility of a reduced power message with dtc p2101 and/or p1516 due to potential throttle body issue. Read More »
This Preliminary information communicates the possibility of dtc P0238 setting after service work due to the Turbocharger Air Pressure Sensor wiring connector and AC Refrigerant wiring connectors be swapped accidently diring reassembly of ... Read More »
This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs. Read More »
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Read More »
This service bulletin provides repair information to correct a customer concern of a Service AWD Message in DIC at Ignition On with DTC C056D Set. Read More »
This service bulletin provides repair information to correct a customer concern of passive entry and passive starting functions are always inoperative on one, or both, of the RKE Fobs, possible various DIC messages. Read More »
This service bulletin provides repair information to correct a customer concern of Head Up Display (HUD) Blank, Non-Responsive to Brightness, Aim, or Page Controls, DTC U1518 Set. Read More »
This informational bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability. Read More »
This informational bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability. Read More »
This technical bulletin provides repair information to correct a customer concern of SD Card Removed Error Message Displayed on Instrument Panel Cluster (IPC). Read More »
This Technical bulletin provides a procedure for dealers/technicians to correct a condition of Instrument Panel Cluster or Head-Up Display (HUD) Will Intermittently Black Out or Reset. Read More »
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Read More »
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Read More »
This technical bulletin provides repair information to correct a customer concern of Head Up Display (HUD) Blank, Non-Responsive to Brightness, Aim, or Page Controls, DTC U1518 Set. Read More »
This service bulletin provides repair information for dealers/technicians to correct a customer concern of a Malfunction Indicator Lamp Illuminated with DTC P26BB Set. Read More »
This service bulletin provides a procedure to inspect the A/C compressor failure due to a combination of low refrigerant and/or PAG oil to correct a condition of Air Conditioning Blows Warm Air and/or Does Not Get Cold. Read More »
This informational bulletin provides information on Transmission Adaptive Functions and Correcting Low Mileage Harsh Shifts, Slips, or Flares. Read More »
This Preliminary information communicates information to dealers advising certain Over the air updates and USB updates have been temporarily suspended. Read More »
This informational bulletin provides information on OnStar? VCIM is currently restricted parts. By working closely with our dealers and technicians, through the part restriction process, the General Motors team will gain a better ... Read More »
This informational bulletin provides information on Loss of Phone Pairing or Favorites, Last Setting of Volume, Station, App, and Audio Settings Change When Vehicle Shuts Down in Demo Mode and that this is considered a normal ... Read More »
This service bulletin provides information for dealers/technicians on Stone Chip/Membrane Damage, Broken Connector and/or Sensor Retaining Tabs, and/or Paint Damage of Park Assist Sensors. Read More »
This informational bulletin provides information for dealers/technicians on Head-Up Display (HUD) on Vehicles Model Year 2017 and Newer Having Rotational Feature that Allows for Adjusting of Angle of HUD Image. Read More »
This Preliminary information communicates to dealers? information related to a Malfunction Indicator Lamp (MIL) Illuminated due to a U0672 setting. Advises the technician to perform Electric Engine Coolant Pump connection inspections. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines. Read More »
This service bulletin provides a service procedure to correct a customer concern of a Malfunction Indicator Lamp (MIL) Illuminated - DTC P3075 Set. Read More »
This service bulletin provides repair information for dealers/technicians to correct a customer concern of a Malfunction Indicator Lamp Illuminated with DTC P26BB Set. Read More »
This service bulletin provides repair information for dealers/technicians to correct a customer concern of a Malfunction Indicator Lamp Illuminated with DTC P26BB Set. Read More »
This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines. Read More »
This engineering informational bulletin is requesting information on product issue with the door weather strip, door body fit, and/or rear tail lamp moisture. Read More »
This technical bulletin provides repair information to correct a customer concern of the front turn signal lamp flashing fast, or inoperative. Read More »
This technical bulletin provides repair information to correct a customer concern of the front turn signal lamp flashing fast, or inoperative. Read More »
This technical bulletin provides repair information to correct a customer concern of Blue or Black Screen and Service Rear Vision System Message on Radio Display Shifting into Reverse. Read More »
This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks. Read More »
This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks. Read More »
This engineering information PI ends the need for information from the field for issues on Sunroof and/or Sunshade with Loss of Express Motion or Sunshade Does Not Go Past Halfway Closed and to refer to SI for further diagnosis. Read More »
This engineering informational bulletin is requesting information to notify the dealership personnel not to relearn the sunroof module and to contact the engineer for further instructions. This revision removes the Breakpoint information. Read More »
This engineering informational bulletin is requesting information to notify the dealership personnel not to relearn the sunroof module and to contact the engineer for further instructions. Read More »
This technical bulletin provides a procedure to check the rearview mirror coax connector for looseness by disconnecting and reconnecting the electrical connector and to correct the customers concern for the rearview mirror video screen ... Read More »
This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Read More »
This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Read More »
This technical bulletin provides repair information to correct a customer concern of Low Volume of Air Delivery Through the Defrost Vents During Vehicle Remote Start. Read More »
VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:REAR WINDOW:ELECTRICAL HEATING ELEMENT
This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. Read More »
VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:ENGINE COOLANT HOSES AND FITTINGS
This service bulletin provides repair information for dealers/technicians to correct a customer concern of a Malfunction Indicator Lamp Illuminated with DTC P26BB Set. Read More »
This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. Read More »
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Read More »
This Preliminary information communicates to the dealer that a customer may comment that the MIL light is illuminated. The technician may find P1098 and/or P26BB set current or history. Read More »
This informational bulletin provides information for dealers/technicians on informing customers on the release of a rear seat back (60%) stuck in down position/will not raise up, and/or front seat belt height adjuster stuck in the full ... Read More »
This informational bulletin provides information for dealers/technicians on informing customers on the release of a rear seat back (60%) stuck in down position/will not raise up, and/or front seat belt height adjuster stuck in the full ... Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This service bulletin provides information for the Global Warranty Management (GWM) Warranty Parts Center (WPC) Part Photo Return Process (U.S. Dealers Only). Read More »
This Warranty Administration bulletin provides information on the Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program. Read More »
This Preliminary Information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This preliminary informational bulletin provides information on Damaged, Disassembled or Improperly Packaged Turbochargers Returned to Warranty Part Center. Read More »
This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen. Read More »
This Preliminary information communicates a work around when only 11 digit PUN (Part Unique Number) is seen on Service Solenoid Body Assembly. Read More »
This Preliminary information communicates a work around when only 11 digit PUN (Part Unique Number) is seen on Service Solenoid Body Assembly. Read More »
This Preliminary information communicates a work around when only 11 digit PUN (Part Unique Number) is seen on Service Solenoid Body Assembly. Read More »
This Preliminary information communicates advises the technician that the ECM part number will be placed on a parts restriction through the General Motors Technical Assistance Center. Read More »
This engineering informational bulletin is requesting information on product issue with the door weather strip, door body fit, and/or rear tail lamp moisture. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA) (US dealers only). Read More »
This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This informational bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area. Read More »
This service bulletin provides a procedure to install a winter grille cover to correct the customer concerns of Poor Engine Performance in Extremely Cold Weather Conditions, Charge Air Cooler Icing, Malfunction Indicator Lamp (MIL) ... Read More »
This technical bulletin provides repair information to correct a customer concern of hearing a rattle noise in passenger or driver upper B-Pillar area. Read More »
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks. Read More »
This Preliminary Information communication provides information to the technician about vehicles with tire sidewall irregularities. This is a visual condition that will not affect durability, reliability or performance of the tires. Read More »
This service bulletin provides information for dealers/technicians on Tire/Wheel Characteristics (Vibration, Balance, Shake, Flat Spotting) of GM Original Equipment Tires. Read More »
This warranty administration bulletin provides information on the tires supplied with a new vehicle are covered by General Motors against defects in material or workmanship under the Bumper-to-Bumper New Vehicle Limited Warranty. Read More »
This technical bulletin provides a procedure on how to clean and resurface aluminum wheel bead seats for vehicles that have the condition of Tire Slowly Goes Flat, Tire Air Loss, Low Tire Pressure Warning Light Illuminated, Aluminum Wheel ... Read More »
This bulletin contains information for the new tires that the vehicle is equipped with and that they are covered by General Motors against defects in material or workmanship under the New Vehicle Warranty (in Canada, the Base Warranty ... Read More »
This warranty administration bulletin provides information on The tires supplied with a new vehicle are covered by General Motors against defects in material or workmanship under the Bumper-to-Bumper New Vehicle Limited Warranty. Read More »
This Preliminary Information communication provides information to the technician about vehicles with tire sidewall irregularities. This is a visual condition that will not affect durability, reliability or performance of the tires. Read More »
This Preliminary Information communication provides information to the technician about vehicles with tire sidewall irregularities. This is a visual condition that will not affect durability, reliability or performance of the tires. Read More »
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks. Read More »
This bulletin updates the position of General Motors on refinishing aluminum wheels. GM has determined that wheel refinishing under warranty will no longer be performed. Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement. Read More »
This service bulletin provides information for dealers/technicians on Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel). Read More »
This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement. Read More »
This service bulletin provides information for dealers/technicians on Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel). Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This bulletin updates the position of General Motors on refinishing fully color painted aluminum wheels with base paint. GM has established a new process for the way that refinishing under GM Warranty will be handled (U.S. ONLY). Read More »
This service bulletin provides information for dealers/technicians on Tire/Wheel Characteristics (Vibration, Balance, Shake, Flat Spotting) of GM Original Equipment Tires. Read More »
Customer Satisfaction Program - The owner?s manual for certain 2019 and 2020 model year Cadillac XT4 vehicles includes incorrect instructions for towing the vehicle behind another vehicle with two wheels on the ground and two wheels on a ... Read More »
This informational bulletin provides retail, wholesale and fleet personnel with General Motors recommendations for customer concerns related to wheel alignment. Read More »
Customer Sat. - The owner?s manual for certain 2019 model year Chevrolet Malibu vehicles includes instructions for towing the vehicle behind another vehicle with all four wheels on the ground (i.e., ?dinghy? towing). Read More »
Customer Sat. - The owner?s manual for certain 2019 model year Cadillac XT4 vehicles includes incorrect instructions for towing the vehicle behind another vehicle with two wheels on the ground and two wheels on a device known as a dolly. Read More »
This engineering information (EI) closure ends the need for information from the field on a stick-slip type condition felt in steering wheel at highway speeds. Read More »
This technical bulletin provides a procedure on how to clean and resurface aluminum wheel bead seats for vehicles that have the condition of Tire Slowly Goes Flat, Tire Air Loss, Low Tire Pressure Warning Light Illuminated, Aluminum Wheel ... Read More »
This service bulletin provides information for dealers/technicians on Front Seat Adjuster Track Service Part Availability Separate from Complete Seat Cushion Frame Assembly. Read More »
This service bulletin provides information for dealers/technicians on Front Seat Adjuster Track Service Part Availability Separate from Complete Seat Cushion Frame Assembly. Read More »
This Preliminary information communicates and issue with the memory seat module waking up the low speed GM lan bus and causing a battery draw. Read More »
This technical bulletin provides repair information to correct a customer concern of front seat slight rocking movement while shifting weight from seat, during hard stops, and/or when driving over rough road surface. Read More »
This informational bulletin provides information for dealers/technicians on informing customers on the release of a rear seat back (60%) stuck in down position/will not raise up, and/or front seat belt height adjuster stuck in the full ... Read More »
This informational bulletin provides information for dealers/technicians on informing customers on the release of a rear seat back (60%) stuck in down position/will not raise up, and/or front seat belt height adjuster stuck in the full ... Read More »
This informational bulletin provides information for information on passenger presence sensing system (PPS or PSS) concerns with custom upholstery, accessory seat heaters or other comfort enhancing devices. Read More »
This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. Read More »
This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. Read More »
This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. Read More »
This Preliminary Information communication provides information to the technician about vehicles that may have Service Front Camera, Service Lane Departure Warning, and Service Lane Keep Assist Message. Read More »
This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. Read More »
This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Coaxial Related Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This Preliminary information communicates the possibility of a rattle noise that can occur from the timing cover area due to sticking timing chain tensioner. Read More »
This Preliminary information communicates that a rotational clicking noise heard after engine shut down is a design characteristic and no repairs should be attempted. Read More »
This Preliminary information communicates the potential for condensation to freeze up inside the Crankcase Pressure Sensor causing dtc P04FB to set. Read More »
This Preliminary Information communicates to the technician that some customers may comment on the operation of their haptic seat during a Lane Keep Assist event. Lane Keep Assist works differently than Lane Departure Warning. Read More »
This service bulletin provides repair information to correct a customer concern of Blue or Black Screen and Service Rear Vision System Message on Radio Display Shifting into Reverse. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This technical bulletin provides repair information to correct a customer concern of Blue Screen and Service Rear Vision System Message on Radio Display. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Read More »
This bulletin updates the position of General Motors on refinishing aluminum wheels. GM has determined that wheel refinishing under warranty will no longer be performed. Read More »
This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Coaxial Related Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This service bulletin provides information for the Global Warranty Management (GWM) Warranty Parts Center (WPC) Part Photo Return Process (U.S. Dealers Only). Read More »
This Warranty Administration bulletin provides policy information on Causal Part requirements for transactions submitted to GM for payment. Read More »
This service bulletin provides repair information to correct a customer concern of Blue or Black Screen and Service Rear Vision System Message on Radio Display Shifting into Reverse. Read More »
This service bulletin provides repair information to correct a customer concern of Head Up Display (HUD) Blank, Non-Responsive to Brightness, Aim, or Page Controls, DTC U1518 Set. Read More »
This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with ... Read More »
This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with ... Read More »
This service bulletin provides repair information to correct a customer concern of Radio Resets or Reboots and May Display myBrand Splash Animation. Read More »
This Preliminary Information communication provides information to the technician about vehicles with tire sidewall irregularities. This is a visual condition that will not affect durability, reliability or performance of the tires. Read More »
This service bulletin provides repair information to correct a customer concern of Blue or Black Screen and Service Rear Vision System Message on Radio Display Shifting into Reverse. Read More »
This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen. Read More »
This service bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear. Read More »
This service bulletin provides information on GM Canada New Vehicle Tire Warranty Program for Original Equipment (OE) Tires and PDI installed Limited Production Option (LPO) Tires. Read More »
This bulletin updates the position of General Motors on refinishing fully color painted aluminum wheels with base paint. GM has established a new process for the way that refinishing under GM Warranty will be handled (U.S. ONLY). Read More »
This preliminary informational bulletin provides information on Damaged, Disassembled or Improperly Packaged Turbochargers Returned to Warranty Part Center. Read More »
This technical bulletin provides repair information to correct a customer concern of Head Up Display (HUD) Blank, Non-Responsive to Brightness, Aim, or Page Controls, DTC U1518 Set. Read More »
The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them. Read More »
This service bulletin provides a service procedure to correct a customer concern of a Malfunction Indicator Lamp (MIL) Illuminated - DTC P3075 Set. Read More »
This service bulletin provides repair information for dealers/technicians to correct a customer concern of a Malfunction Indicator Lamp Illuminated with DTC P26BB Set. Read More »
This service bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area. Read More »
This Preliminary information communicates a condition where the Video Processing Control Module is not able to be programmed to the vehicle. This PI offeres a couple workarounds while Engineering evaluates the concern. Read More »
This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Read More »
This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines. Read More »
This service bulletin provides repair information to correct a customer concern of Blue or Black Screen and Service Rear Vision System Message on Radio Display Shifting into Reverse. Read More »
This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This service bulletin provides information regarding Witness Marks from Panel Adjustments Made During Manufacturing and that it is considered a normal condition. Read More »
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only). Read More »
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only). Read More »
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim. Read More »
This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer. Read More »
This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen. Read More »
This engineering information (EI) bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards a brake fluid leak being detected with DTC C2A22 Symptom 00 Set. Read More »
This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This service bulletin provides information to aid a dealer/customer concern of Radio Unwanted Phantom Touch or Non-Responsive to Touch After Cleaning/Disinfecting Radio Display. Read More »
This service bulletin provides a procedure to inspect the A/C compressor failure due to a combination of low refrigerant and/or PAG oil to correct a condition of Air Conditioning Blows Warm Air and/or Does Not Get Cold. Read More »
The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them. Read More »
This warranty administration bulletin provides information on Warranty Administration - Customer Concern Not Duplicated (CCND) Labor Operation Numbers. Read More »
This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA) (US dealers only). Read More »
This bulletin provides information on the Transport Mode On Message Being Displayed in the Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the Transport Mode message ON and OFF. Read More »
This Warranty Administration bulletin provides information on Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program Information. Read More »
This warranty administration bulletin provides information on Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program Information. Read More »
This informational bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability. Read More »
This informational bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability. Read More »
This informational bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability. Read More »
This Preliminary information communicates a work around when only 11 digit PUN (Part Unique Number) is seen on Service Solenoid Body Assembly. Read More »
This Preliminary information communicates a possible BCM concern if DTC P0747 sets during engine cranking when the transmission is in park. Read More »
This informational bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only). Read More »
Customer Satisfaction Program - The owner?s manual for certain 2019 and 2020 model year Cadillac XT4 vehicles includes incorrect instructions for towing the vehicle behind another vehicle with two wheels on the ground and two wheels on a ... Read More »
This Preliminary information communicates a work around when only 11 digit PUN (Part Unique Number) is seen on Service Solenoid Body Assembly. Read More »
This informational bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area. Read More »
This informational bulletin explains Unscheduled Supplemental Services (including Flushing Services and Additives) and the Proper use of GM Simplified Maintenance Schedules. Read More »
This Bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
Service Update - Certain vehicles may have a condition where the customer may be able to shift out of park with an expired latent fault mode counter. Read More »
This informational bulletin provides information on GM Accessories ? Dealer-Installed, Repaired or Replaced During Warranty Coverage Period. Read More »
This informational bulletin provides retail, wholesale and fleet personnel with General Motors recommendations for customer concerns related to wheel alignment. Read More »
This Warranty Administration bulletin provides information on customer vehicles concern results in a manufacturer repurchase from the customer, GM depends on the dealership to host and administer the repurchase closing and intake of the ... Read More »
Customer Sat. - The owner?s manual for certain 2019 model year Chevrolet Malibu vehicles includes instructions for towing the vehicle behind another vehicle with all four wheels on the ground (i.e., ?dinghy? towing). Read More »
Customer Sat. - The owner?s manual for certain 2019 model year Cadillac XT4 vehicles includes incorrect instructions for towing the vehicle behind another vehicle with two wheels on the ground and two wheels on a device known as a dolly. Read More »
This informational bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier ... Read More »
This preliminary information bulletin provides information om Service Programming System (SPS) Error Codes (E4398, E4399, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491 or E6961). Read More »
This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC). Read More »
This engineering information (EI) closure ends the need for information from the field on a stick-slip type condition felt in steering wheel at highway speeds. Read More »
This technical bulletin provides a procedure on how to clean and resurface aluminum wheel bead seats for vehicles that have the condition of Tire Slowly Goes Flat, Tire Air Loss, Low Tire Pressure Warning Light Illuminated, Aluminum Wheel ... Read More »
This technical bulletin provides repair information to correct a customer concern of Blue Screen and Service Rear Vision System Message on Radio Display. Read More »
This engineering information bulletin is requesting information on paint quality issue that drives a warrantable item type of repair on any 2019 or 2020 Cadillac Model and to submit a Field Product Report (FPR) using the FPR App. Read More »
N182205890-02 - Service Update. Certain vehicles may have a condition where some capacitors used on the purge pump printed circuit board (PCB), may have unknown performance. Read More »
This technical bulletin provides repair information to correct a customer concern of Radio Displays Climate Off Message or HVAC Popup Displays Different Settings. Read More »
This informational bulletin provides information to educate the customer on using either the radio and/or the physical controls to adjust the HVAC settings. Read More »
This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only). Read More »
This Preliminary Information communication provides information to the technician about vehicles headrest monitors shutting off intermittently when closing driver door. Dealers should not replace any parts for this concern. Read More »
This technical bulletin provides repair information to correct a customer concern of Radio Displays Climate Off Message or HVAC Popup Displays Different Settings. Read More »
This bulleting provides Wiring, Terminal and Connector Repair Information including how to determine the Service Part Number in eSI and how to locate the part(s) in the EPC. Read More »
This engineering information (EI) bulletin is requesting information from the field on the malfunction indicator lamp (MIL) illuminating to develop/validate a field fix. This version updates the Correction steps. Read More »
This technical bulletin provides repair information to correct a customer concern of the front turn signal lamp flashing fast, or inoperative. Read More »
The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This informational bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts. Read More »
This Preliminary information communicates information to dealers advising certain Over the air updates and USB updates have been temporarily suspended. Read More »
This warranty administration bulletin provide policy information to cover GM's policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada. Read More »
This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC). Read More »
The Preliminary Information communication advises the technician that there is a part restriction for the 2.0L LSY engine. The dealer technician is advised to call the GM Product Quality Center for further assistance. Read More »
This technical bulletin provides repair information to correct a customer concern of Blue Screen and Service Rear Vision System Message on Radio Display. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer. Read More »
This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC). Read More »
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formally known as a Product Allegation Resolution (PAR) claim. Read More »
This Preliminary information communicates the possible setting of B101D-39 in the OnStar module and advises of byte info to retrieve while engineering completes further investigation. Read More »
This service bulletin provides policy information on warranty administration guidelines for multiple repairs with independent causes (GM Canada Dealers Only). Read More »
This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with ... Read More »
This warranty administration bulletin explains to the technician that when using wiring repair labor operations, additional information may be needed when submitting Global Warranty transactions when doing wiring repairs. Read More »
This informational bulletin provides information on Loss of Phone Pairing or Favorites, Last Setting of Volume, Station, App, and Audio Settings Change When Vehicle Shuts Down in Demo Mode and that this is considered a normal ... Read More »
This PI was written to inform dealers of a condition where a "Climate off" message will be displayed on the screen even thought the HVAC system is fully operational. Read More »
This Preliminary information communicates the possible setting of B101D-39 in the OnStar module and advises of byte info to retrieve while engineering completes further investigation. Read More »
This Preliminary information communicates a concern where the radio will reboot when adjusting the volume intermittently and that engineering is investigating. Read More »
This Preliminary information communicates a concern where the radio will reboot when adjusting the volume intermittently and that engineering is investigating Read More »
This service bulletin provides information to aid a dealer/customer concern of Radio Unwanted Phantom Touch or Non-Responsive to Touch After Cleaning/Disinfecting Radio Display. Read More »
This technical bulletin provides repair information to correct a customer concern of Blue or Black Screen and Service Rear Vision System Message on Radio Display Shifting into Reverse. Read More »
This Preliminary information communicates a concern where the radio will reboot when adjusting the volume intermittently and that engineering is investigating Read More »
This service bulletin provides repair information to correct a customer concern of Blue or Black Screen and Service Rear Vision System Message on Radio Display Shifting into Reverse. Read More »
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Read More »
This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D Read More »
This Preliminary information communicates a possible BCM and/or circuit 5985 concern if DTC P0747 sets during engine shut down when the transmission is in park or neutral when no hydraulic/mechanical transmission concerns are present. Read More »
This service bulletin provides information on submitting quality Photos of Various Vehicle Concerns to the GM Technical Assistance Center (TAC). Read More »
This service bulletin provides information on All hazmat parts being returned to the Warranty Parts Center (WPC) must be shipped using Central Transport. Hazardous materials should never be sent by air transportation to the WPC. Read More »
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim. Read More »
This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Read More »
This Warranty Administration bulletin provides information on the Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program. Read More »
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only). Read More »
This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This Preliminary Information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Read More »
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Read More »
This service bulletin provides information on submitting quality Photos of Various Vehicle Concerns to the GM Technical Assistance Center (TAC). Read More »
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only). Read More »
This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only). Read More »
This warranty administration bulletin provides policy information for variable diagnostic time allowances on select labor operations (U.S. Only). Read More »
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks. Read More »
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only). Read More »
This Warranty Administration bulletin provides retail and wholesale service personnel with the policies/procedures and the warranty transaction submission procedures that support the Personal Property Damage process. Read More »
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Read More »
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Read More »
This service bulletin provides information on Handling Requests for Modifications to Permanently Import/Export Vehicles Between the U.S. and Canada. Read More »
This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This service bulletin provides information on GM Canada New Vehicle Tire Warranty Program for Original Equipment (OE) Tires and PDI installed Limited Production Option (LPO) Tires. Read More »
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This service bulletin provides information for the Global Warranty Management (GWM) Warranty Parts Center (WPC) Part Photo Return Process (U.S. Dealers Only). Read More »
This service bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC). Read More »
This Warranty Administration bulletin provides information on Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program Information. Read More »
This warranty administration bulletin provide policy information for variable diagnostic time allowances on select labor operations (U.S. Only). Read More »
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim. Read More »
This warranty administration bulletin provides information on Warranty Administration ? Customer Concern Not Duplicated (CCND) Labor Operation Numbers. Read More »
This warranty administration bulletin provides information on Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program Information. Read More »
This warranty administration bulletin provides information on the tires supplied with a new vehicle are covered by General Motors against defects in material or workmanship under the Bumper-to-Bumper New Vehicle Limited Warranty. Read More »
This warranty administration bulletin provide policy information to cover GMs policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada. Read More »
This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA) (US dealers only). Read More »
N192257060 - CSP - The owner's manual for certain 2019 model year Cadillac XT4 vehicles includes incorrect instructions for towing the vehicle behind another vehicle with two wheels on the ground and two wheels on a device known as a dolly. Read More »
This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC). Read More »
This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA) (US dealers only). Read More »
This informational bulletin provides information on comebacks prevention information and using customer concern verification sheets (CCVS). Read More »
This informational bulletin provides information for dealers/technicians on Information on Head-Up Display (HUD) on Vehicles Model Year 2017 and Newer Has Rotational Feature that Allows for Adjusting of the Angle of the HUD Image. Read More »
This technical bulletin provides repair information to correct a customer concern of Intermittent or Continuous Horn Blowing, Horn Activation Sensitive to the Touch. Read More »
This bulletin explains the labor operation numbers used for submitting warranty claims for module reprogramming and not when replacing a module. Read More »
This informational bulletin provides information on OnStar? VCIM is currently restricted parts. By working closely with our dealers and technicians, through the part restriction process, the General Motors team will gain a better ... Read More »
This informational bulletin provides information for the dealer technician to gather as much information to help aid Engineers by completely filling out requested reports. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer. Read More »
This informational bulletin provides information on comebacks prevention information and using customer concern verification sheets (CCVS). Read More »
This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC). Read More »
This service bulletin provides a service procedure to correct a customer concern of a Malfunction Indicator Lamp (MIL) Illuminated - DTC P3075 Set. Read More »
This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines. Read More »
This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen. Read More »
This informational bulletin provides information for dealers/technicians on Head-Up Display (HUD) on Vehicles Model Year 2017 and Newer Having Rotational Feature that Allows for Adjusting of Angle of HUD Image. Read More »
This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels ... Read More »
This informational bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability. Read More »
This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This Preliminary information communicates a work around when only 11 digit PUN (Part Unique Number) is seen on Service Solenoid Body Assembly. Read More »
This informational bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area. Read More »
This informational bulletin explains Unscheduled Supplemental Services (including Flushing Services and Additives) and the Proper use of GM Simplified Maintenance Schedules. Read More »
This technical bulletin provides repair information to correct a customer concern of Low Volume of Air Delivery Through the Defrost Vents During Vehicle Remote Start. Read More »
This informational bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier ... Read More »
This technical bulletin provides a procedure on how to clean and resurface aluminum wheel bead seats for vehicles that have the condition of Tire Slowly Goes Flat, Tire Air Loss, Low Tire Pressure Warning Light Illuminated, Aluminum Wheel ... Read More »
This engineering information bulletin is requesting information on paint quality issue that drives a warrantable item type of repair on any 2019 or 2020 Cadillac Model and to submit a Field Product Report (FPR) using the FPR App. Read More »
This Preliminary information communicates the possibility of a rattle noise that can occur from the timing cover area due to sticking timing chain tensioner. Read More »
This engineering informational bulletin is requesting information from the field to determine the root cause of the overhead sunglasses compartment not being able to secure back into the resting position. Read More »
The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them. Read More »
This informational bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing a rattle noise in passenger or driver upper B-Pillar area. Read More »
This engineering informational bulletin is requesting information from the field to determine the root cause of the overhead sunglasses compartment not being able to secure back into the resting position. Read More »
This technical bulletin provides repair information to correct a customer concern of Blue Screen and Service Rear Vision System Message on Radio Display. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer. Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
This engineering informational bulletin is requesting information on product issue with the door weather strip, door body fit, and/or rear tail lamp moisture. Read More »
This informational bulletin provides information for information on passenger presence sensing system (PPS or PSS) concerns with custom upholstery, accessory seat heaters or other comfort enhancing devices. Read More »
EQUIPMENT ADAPTIVE/MOBILITY:VEHICLE CONTROLS:SPEED CONTROL
This service bulletin provides information for dealers/technicians on Vehicles that Will Not Hold Set Cruise Control Speed in Enhanced Cruise Control Mode. Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure, when diagnosing vibration concerns. Read More »
This service bulletin provides a procedure to inspect the A/C compressor failure due to a combination of low refrigerant and/or PAG oil to correct a condition of Air Conditioning Blows Warm Air and/or Does Not Get Cold. Read More »
This PI was written to inform dealers of a condition where a "Climate off" message will be displayed on the screen even thought the HVAC system is fully operational. Read More »
This PI was written to inform dealers of a condition where a "Climate off" message will be displayed on the screen even thought the HVAC system is fully operational. Read More »
This Preliminary information communicates the possibility of dtc P0238 setting after service work due to the Turbocharger Air Pressure Sensor wiring connector and AC Refrigerant wiring connectors be swapped accidently diring reassembly of ... Read More »
This Preliminary information communicates a concern where the radio will reboot when adjusting the volume intermittently and that engineering is investigating. Read More »
This service bulletin provides information to aid a dealer/customer concern of Radio Unwanted Phantom Touch or Non-Responsive to Touch After Cleaning/Disinfecting Radio Display. Read More »
This Preliminary information communicates a concern where the radio will reboot when adjusting the volume intermittently and that engineering is investigating Read More »
This Preliminary information communicates a GM part number for reflective high temperature heat or insulating tape when repairing wiring harnesses. Read More »
This Preliminary Information communication provides information to the technician that General Motors and General Motors of Canada Company do not support cross border sales. Read More »
This service bulletin provides repair information to correct a customer concern of Head Up Display (HUD) Blank, Non-Responsive to Brightness, Aim, or Page Controls, DTC U1518 Set. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
