Technical Service Bulletins (TSBs) for the 2011 Beetle are official communications between Volkswagen & their dealerships that describe processes for troubleshooting or fixing certain common problems.
All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
Technical Bulletin (Squeaking Noises From Front Of Vehicle): Squeaking/creaking noise from front of vehicle while fully turning steering wheel. Read More »
Customer states rattle noise from the underbody heat shields Oil level sensor leaking Customer states noise from front suspension Customer states blower stays on Customer states cannot set seat memory Customer states cannot set seat ... Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states MIL-on with any combination of P0300, P0301, P0302, P0303, P0304, P1D74 and/or P1D75 in the ECM Customer states rattle noise from the underbody heat shields Customer ... Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states MIL-on with any combination of P0300, P0301, P0302, P0303, P0304, P1D74 and/or P1D75 in the ECM Customer states rattle noise from the underbody heat shields Customer ... Read More »
Customer states rattle noise from the underbody heat shields Oil level sensor leaking Customer states noise from front suspension Customer states blower stays on Any TDI within the vehicle/MY ... Read More »
Customer states rattle noise from the underbody heat shields Customer states noise from front suspension Customer states blower stays on Any TDI within the vehicle/MY range Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states rattle noise from the underbody heat shields Customer states noise from front suspension Customer states blower stays on Any TDI within the vehicle/MY ... Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states rattle noise from the underbody heat shields Customer states noise from front suspension Customer states blower stays on Any TDI within the vehicle/MY ... Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states front brake noise Customer states blind spot monitoring error in MFI Customer states blower stays on ... Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states front brake noise Customer states blind spot monitoring error in MFI Customer states blower stays on ... Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states front brake noise Customer states blower stays on Customer states cannot set seat memory Customer ... Read More »
Customer states rattle noise from the underbody heat shields Oil level sensor leaking Customer states front brake noise Customer states blower stays on Customer states cannot set seat memory Customer states cannot set seat memory ... Read More »
Engine Crank, No Start after Long Periods without Driving. Engine may run rough, and or MIL-ON with DTC P0087-low fuel pressure stored in ECM Fault Memory. Read More »
If mechanical damage is found to the turbocharger (e.g. damaged compression wheel, loose or broken shaft), it is not enough to just replace the turbocharger. Read More »
Customer states rattle noise from the underbody heat shields Oil level sensor leaking Customer states noise from front suspension Customer states blower stays on Any TDI within the vehicle/MY ... Read More »
Technical Bulletin (Washer Level Sensor issues): The sensitivity of the washer solvent level sensor (G33) can be affected by the type, concentration, and the presence of additives in the washer solvent currently in the tank. Read More »
Technical Bulletin: High Pressure Fuel Pump Diagnosis. Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements. Read More »
Technical Bulletin (Fuel Additive to Help Prevent Sporadic Misfire Faults): Fuel quality impacts the operating performance, efficiency and service life of the engine. Read More »
Technical Bulletin (Engine Oils Which Meet Volkswagen Oil Quality Standard): This document informs of a sample list of products generally available in the North American market that meet the Volkswagen Oil Quality ... Read More »
When diagnosis on the above engine leads to the testing of the N75, please refer to the picture below. The diagram shows which vacuum ports on the N75 valve should hold vacuum and which ones should not. Read More »
When diagnosis on the above engine leads to the testing of the N75, please refer to the picture below. The diagram shows which vacuum ports on the N75 valve should hold vacuum and which ones should not. Read More »
Technical Bulletin (Oil Consumption Measurement): Customer states oil consumption is higher than the Volkswagen oil consumption standard of up to 0.5 quarts per 600 miles, or 0.5 liters per 1000 km. Read More »
Technical Bulletin The use of contaminated gasoline, seasonal fuel changes (summer/winter fuel) or gasoline with a low content of deposit control additives may result in one or more of the following conditions: -Excessive accumulation ... Read More »
Technical Bulletin (Proper Removal of Engine Cover to Avoid Breakage): Pulling on the engine cover in some areas can cause damage. This document informs on the procedure to remove the engine cover. Read More »
Technical Bulletin (Manifold Absolute Pressure Range / Performance Stored in ECM Fault Memory): Monitoring strategy for the manifold absolute pressure sensor is too sensitive, causing P0106 to incorrectly set in the engine control module. Read More »
Tech Tips (CBEA, CJAA, CKRA engine codes DPF replacement and/or DTCS P2413, P2463): This document informs of the use of aftermarket air filters such as cotton bed steel mesh or cone style, can cause the MAF sensor to not read ... Read More »
Technical Bulletin (Oil Consumption Measurement): Customers have stated oil consumption is higher than the Volkswagen oil consumption standard of up to 0.5 quarts per 600 miles, or 0.5 liters per 1000 km. Read More »
Technical Bulletin (Oil Consumption Measurement): Customers have stated oil consumption is higher than the Volkswagen oil consumption standard of up to 0.5 quarts per 600 miles, or 0.5 liters per 1000 km. Read More »
VOLKSWAGEN: ACTIVATED CHARCOAL FILTER SYSTEM, SOLENOID VALVE AND PERFORMING GFF FUNCTION TEST A VACUUM CHECK ON CANISTER PURGE VALVE N80 ARE ESSENTIAL TO DIAGNOSE PROPER OPERATION. MODEL 2009-14 ALL BUT ROUTAN. Read More »
In SAGA, the time units for the Volkswagen DoubleCheck labor operation were reduced in error from 50 time units to 30 time units during the system update posted on July 4th. Read More »
In SAGA, the time units for the Volkswagen DoubleCheck labor operation were reduced in error from 50 time units to 30 time units during the system update posted on July 4th. Read More »
Engine Crank, No Start after Long Periods without Driving. Engine may run rough, and or MIL-ON with DTC P0087-low fuel pressure stored in ECM Fault Memory. Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states front brake noise Customer states blind spot monitoring error in MFI Customer states blower stays on ... Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states front brake noise Customer states blind spot monitoring error in MFI Customer states blower stays on ... Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states front brake noise Customer states blower stays on Customer states cannot set seat memory Customer ... Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states MIL-on, fault P2422 stored in ECM Customer states front brake noise Customer states blower stays on ... Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states front brake noise Customer states blower stays on Customer states cannot set seat memory Customer ... Read More »
Customer states rattle noise from the underbody heat shields Oil level sensor leaking Customer states front brake noise Customer states blower stays on Customer states cannot set seat memory Customer states cannot set seat memory ... Read More »
Customer states MIL-on with P013E in the ECM Customer states MIL-on with P0087 P0149 P053F in the ECM Customer states noise during clutch pedal operation Hood release inoperative Customer states MIL-on with ... Read More »
Customer states MIL-on with P013E in the ECM Customer states MIL-on with P0087 P0149 P053F in the ECM Customer states noise during clutch pedal operation Hood release inoperative Customer states MIL-on with ... Read More »
17 17 01 July 5, 2017 2012855 Supersedes Technical Bulletin 17-16-02 (V171602) dated April 29, 2016 due to updated oil standards lists to current specifications. Read More »
Technical Bulletin (Intake manifold runner position sensor issues): This document informs what repairs are needed to fix the issue. This document contains the fault codes necessary to check the warranty coverage for servicing this issue. Read More »
Technical Bulletin (Air Conditioning, Cleaning of the Refrigerant Circuit (U.S.Only)): In cases where an air conditioning system component (such as a compressor or other system component) has failed and debris from the compressor or ... Read More »
Tech Tips (Coolant Leak or Repeat Coolant Leak from the Water Pump Area): The document informs to inspect for issues, and why issues may happen. Read More »
Technical Bulletin (Electric Coolant Fans Continue to Run after Ignition is Switched OFF): This documentation informs it is considered normal operation for the electric coolant fans to continue to run for up to 15 minutes after the ... Read More »
For an upcoming campaign that will include all MY09-14 TDI (CBEA/CJAA) vehicles, we need to test the SVM3339 code in 200 vehicles of various model-years and engine/transmission combinations. Read More »
For an upcoming campaign that will include all MY09-14 TDI (CBEA/CJAA) vehicles, we need to test the SVM3339 code in 200 vehicles of various model-years and engine/transmission combinations. Read More »
Technical Bulletin (Rattling Noises from Engine Compartment Area or Exhaust System): Customers may complain of a rattling noise from engine or exhaust area while accelerating from 1800-3000 RPM. Read More »
Tech Tips (2.0L CCTA/CBFA Coolant Leak or Repeat Coolant Leak from the Water Pump Area): This document informs of the observations that need to be taken to service a water pump replacement Read More »
Tech Tips (CBEA, CJAA, CKRA engine codes DPF replacement and/or DTCS P2413, P2463): This document informs of the use of aftermarket air filters such as cotton bed steel mesh or cone style, can cause the MAF sensor to not read ... Read More »
Use of aftermarket air filters such as cotton bed steel mesh or cone style, can cause the MAF sensor to not read accurately, affecting vehicle performance and critical monitoring functions for the diesel particulate filter. Read More »
Technical Bulletin (Electric Coolant Fans Continue to Run after Ignition is Switched OFF): This document informs it is considered normal operation for the electric coolant fans to continue to run for up to 15 minutes after the ignition ... Read More »
Technical Bulletin (Electric Coolant Fans Continue to Run after Ignition is Switched OFF): This document informs it is considered normal operation for the electric coolant fans to continue to run for up to 15 minutes after the ignition ... Read More »
Technical Bulletin (Oil Consumption Measurement): Customers have stated oil consumption is higher than the Volkswagen oil consumption standard of up to 0.5 quarts per 600 miles, or 0.5 liters per 1000 km. Read More »
Technical Bulletin (Oil Consumption Measurement): Customer states oil consumption is higher than the Volkswagen oil consumption standard of up to 0.5 quarts per 600 miles, or 0.5 liters per 1000 km. Read More »
Technical Bulletin (Manifold Absolute Pressure Range / Performance Stored in ECM Fault Memory): Monitoring strategy for the manifold absolute pressure sensor is too sensitive, causing fault code P0106 to incorrectly set in the engine ... Read More »
Technical Bulletin (Update Programming of ECM for Concerns of a Bump Sensation after Coming to a Stop): Current ECM programming may cause a bump after coming to a stop, which may be felt through the chassis of the vehicle. Read More »
After a cold start, the engine coolant temperature gauge will slowly rise to approximately 190? F. When the F265 mapped thermostat opens, the gauge may drop by approximately 60? F before again rising to 190? F. Read More »
After a cold start, the engine coolant temperature gauge will slowly rise to approximately 190? F. When the F265 mapped thermostat opens, the gauge may drop by approximately 60? F before again rising to 190? F. Read More »
For concerns of Fault Code P117A ?Bank 1, correction Lambda middle reached adjustment limit? stored in the ECM, check that the O2 sensors have not been installed or connected improperly. Read More »
For concerns of Fault Code P117A ?Bank 1, correction Lambda middle reached adjustment limit? stored in the ECM, check that the O2 sensors have not been installed or connected improperly. Read More »
When servicing the timing chain sprocket or removing the vibration damper, be aware that one bolt holds both the vibration damper (harmonic balancer) and the crankshaft timing chain sprocket to the crankshaft. Read More »
When servicing the timing chain sprocket or removing the vibration damper, be aware that one bolt holds both the vibration damper (harmonic balancer) and the crankshaft timing chain sprocket to the crankshaft. Read More »
Tech Tips (Equipped with Turbocharged Engine Turbocharger Replacement Tip): If mechanical damage is found to the turbocharger (e.g. damaged compression wheel, loose or broken shaft), it is not enough to just replace the turbocharger. Read More »
Technical Bulletin (Fuel Additive to Help Prevent Sporadic Misfire Faults): Fuel quality impacts the operating performance, efficiency and service life of the engine. Read More »
Customer states rattle noise from the underbody heat shields Oil level sensor leaking Customer states noise from front suspension Customer states blower stays on Customer states cannot set seat memory Customer states cannot set seat ... Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states rattle noise from the underbody heat shields Customer states noise from front suspension Customer states blower stays on Any TDI within the vehicle/MY ... Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states MIL-on with any combination of P0300, P0301, P0302, P0303, P0304, P1D74 and/or P1D75 in the ECM Customer states rattle noise from the underbody heat shields Customer ... Read More »
When diagnosing a vehicle concern, and fault P130A ?Hide Cylinder? is found in the Engine Control Module (ECM), be aware that Engine Control Module (ECM) fault P130A ?Hide Cylinder? indicates a cylinder shut down and does not require ... Read More »
For concerns of Fault Code P117A ?Bank 1, correction Lambda middle reached adjustment limit? stored in the ECM, check that the O2 sensors have not been installed or connected improperly. Read More »
For concerns of Fault Code P117A ?Bank 1, correction Lambda middle reached adjustment limit? stored in the ECM, check that the O2 sensors have not been installed or connected improperly. Read More »
To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear. Read More »
To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear. Read More »
To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear. Read More »
To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear. Read More »
ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE
Tech Tips (2.0L CCTA/CBFA Coolant Leak or Repeat Coolant Leak from the Water Pump Area): Inspect the water pump for signs of contact with engine oil. Engine oil may cause the water pump gasket to swell, which may lead to a coolant leak. Read More »
Tech Tips (2.0L CCTA/CBFA Coolant Leak or Repeat Coolant Leak from the Water Pump Area): This document informs of the observations that need to be taken to service a water pump replacement Read More »
ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY
Tech Tips (2.0L CCTA/CBFA Coolant Leak or Repeat Coolant Leak from the Water Pump Area): Inspect the water pump for signs of contact with engine oil. Engine oil may cause the water pump gasket to swell, which may lead to a coolant leak. Read More »
This special notice is to inform dealers to return all part numbers listed in the document. Only superseded part numbers to be ordered going forward. Read More »
Technical Bulletin (Rattling Noises from Engine Compartment Area or Exhaust System): Customers may complain of a rattling noise from engine or exhaust area while accelerating from 1800-3000 RPM. Read More »
Technical Bulletin Activated Charcoal Filter System, Solenoid Valve 1 -N80- (Canister Purge Valve) Diagnosis): Completing the GFF function test and performing a vacuum check on the Canister Purge Valve -N80- are essential to diagnose ... Read More »
VOLKSWAGEN: TSB CONTAINS AN OWNER NOTIFICATION LETTER. SELECT DOCUMENT SEARCH BUTTON BELOW. TO ENSURE EMISSIONS OF TAILPIPE IS OPTIMIZED AND EFFICIENTLY OPERATING, THE ENGINE MANAGEMENT SOFTWARE WAS IMPROVE DUE TO AN UPDATED ECM ... Read More »
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR
This special notice is to inform dealers to return all part numbers listed in the document. Only superseded part numbers to be ordered going forward. Read More »
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE
VOLKSWAGEN: TSB CONTAINS AN OWNER NOTIFICATION LETTER. SELECT DOCUMENT SEARCH BUTTON BELOW. TO ENSURE EMISSIONS OF TAILPIPE IS OPTIMIZED AND EFFICIENTLY OPERATING, THE ENGINE MANAGEMENT SOFTWARE WAS IMPROVE DUE TO AN UPDATED ECM ... Read More »
Technical Bulletin (Manifold Absolute Pressure Range / Performance issues): This document informs that the monitoring strategy for the manifold absolute pressure sensor being too sensitive, causing P0106 to incorrectly set in the engine ... Read More »
Technical Bulletin (Intake Manifold Faults Stored in ECM Fault Memory issues): This document informs of a failure of Intake manifold causing fault codes to be stored in the ECM. The production solution improved intake manifold design. Read More »
Technical Bulletin (Intake Manifold Fault issues): This document informs of Intake Manifold issues that are recognized in the ECM fault memory. The Production Solution to this issue was an improved intake manifold design. Read More »
Technical Bulletin (Intake Manifold issues): This document informs of a failure of Intake manifold causing fault codes to be stored in the ECM. The fault codes are written in the document. Read More »
Technical Bulletin: High Pressure Fuel Pump Diagnosis. Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements. Read More »
Tech Tips (Fuel line connections): Be aware that fuel lines are color coded on vehicles with return fuel pressure lines. The black line is for fuel pressure supply and the blue line is for fuel pressure return. Read More »
Because Volkswagen supports the development and use of renewable fuels (such as biodiesel fuel blends), customers with certain 2009-2015 MY Volkswagen TDI? Clean Diesel Engine vehicles registered in the State of Minnesota only will ... Read More »
Because Volkswagen supports the development and use of renewable fuels (such as biodiesel fuel blends), customers with certain 2009-2015 MY Volkswagen TDI? Clean Diesel Engine vehicles registered in the State of Minnesota only will ... Read More »
Carefree Maintenance Coverage for Interim Oil Changes for Certain 2009 ? 2015 MY Volkswagen TDI? Clean Diesel Engine Vehicles Registered in the State of Minnesota Only (US Dealers Read More »
Carefree Maintenance Coverage for Interim Oil Changes for Certain 2009 ? 2015 MY Volkswagen TDI? Clean Diesel Engine Vehicles Registered in the State of Minnesota Only (US Dealers Read More »
Technical Bulletin (High Pressure Fuel Pump Diagnosis): Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements. Read More »
Technical Bulletin (High Pressure Fuel Pump Diagnosis): Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements. Read More »
Technical Bulletin (High Pressure Fuel Pump Diagnosis): Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements. Read More »
When the Navigation RNS 850/510/315 is in 3D mode, the top portion of the screen may not display streets. This line represents the horizon and is a normal operation of system. No repairs should be made. Read More »
When the Navigation RNS 850/510/315 is in 3D mode, the top portion of the screen may not display streets. This line represents the horizon and is a normal operation of system. No repairs should be made. Read More »
Fuel Additive to Help Prevent Sporadic Misfire Faults A Volkswagen approved fuel additive is available to help remove and prevent deposits on fuel injectors and intake valves. Read More »
Emissions Service Action (Certain 2010-2014 Volkswagen Vehicles with 2.0L TDI? Clean Diesel Engine ECM Software Update): The vehicle?s engine management software has been improved to assure the vehicle?s tailpipe emissions are optimized ... Read More »
Warranty Information (Policies and Procedures Bulletin): Volkswagen has extended the warranty for the high-pressure fuel pump (HPFP) under specific conditions to 10 years or 120,000 miles, whichever occurs first, from the vehicle's ... Read More »
VOLKSWAGEN DEALERSHIP COMMUNICATION: The vehicle?s engine management software has been improved to assure the vehicle?s tailpipe emissions are optimized and operating efficiently for Volkswagen Vehicles Equipped with a 2. Read More »
VOLKSWAGEN DEALERSHIP COMMUNICATION: This document announced a warranty Volkswagen extension program to cover the High Pressure Fuel Pump on 2009-2012 model year TDI Clean Diesel Engine vehicles. Read More »
VOLKSWAGEN DEALERSHIP COMMUNICATION: Volkswagen announced a warranty extension program to cover the High Pressure Fuel Pump on 2009-2012 model year TDI Clean Diesel Engine vehicles Read More »
Because Volkswagen supports the development and use of renewable fuels (such as biodiesel fuel blends), customers with certain 2009-2015 MY Volkswagen TDI? Clean Diesel Engine vehicles registered in the State of Minnesota only will ... Read More »
Because Volkswagen supports the development and use of renewable fuels (such as biodiesel fuel blends), customers with certain 2009-2015 MY Volkswagen TDI? Clean Diesel Engine vehicles registered in the State of Minnesota only will ... Read More »
Carefree Maintenance Coverage for Interim Oil Changes for Certain 2009 ? 2015 MY Volkswagen TDI? Clean Diesel Engine Vehicles Registered in the State of Minnesota Only (US Dealers Read More »
Carefree Maintenance Coverage for Interim Oil Changes for Certain 2009 ? 2015 MY Volkswagen TDI? Clean Diesel Engine Vehicles Registered in the State of Minnesota Only (US Dealers Read More »
Tech Tips (CBEA, CJAA, CKRA engine codes DPF replacement and/or DTCS P2413, P2463): This document informs of the use of aftermarket air filters such as cotton bed steel mesh or cone style, can cause the MAF sensor to not read ... Read More »
Tech Tips (CBEA, CJAA, CKRA engine codes DPF replacement and/or DTCS P2413, P2463): This document informs of the use of aftermarket air filters such as cotton bed steel mesh or cone style, can cause the MAF sensor to not read ... Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states rattle noise from the underbody heat shields Customer states noise from front suspension Customer states blower stays on Any TDI within the vehicle/MY ... Read More »
To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear. Read More »
To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear. Read More »
To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear. Read More »
To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear. Read More »
Tech Tips (ECM Fault P1250 "Fuel Level Too Low" Will Not Clear): This document informs to clear static ECM fault P1250 "Fuel Level Too Low", add fuel to vehicle and complete a road test of at least 10 miles. Read More »
Be aware that fuel lines are color coded on vehicles with return fuel pressure lines. The black line is for fuel pressure supply and the blue line is for fuel pressure return. Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states MIL-on, fault P2422 stored in ECM Customer states front brake noise Customer states blower stays on ... Read More »
Incorrect torque converter or flywheel/flexplate installation can result in transmission damage. When installing an engine, flywheel or transmission, please follow the installation procedures outlined in ELSA. Read More »
Incorrect torque converter or flywheel/flexplate installation can result in transmission damage. When installing an engine, flywheel or transmission, please follow the installation procedures outlined in ELSA. Read More »
For an upcoming campaign that will include all MY09-14 TDI (CBEA/CJAA) vehicles, we need to test the SVM3339 code in 200 vehicles of various model-years and engine/transmission combinations. Read More »
For an upcoming campaign that will include all MY09-14 TDI (CBEA/CJAA) vehicles, we need to test the SVM3339 code in 200 vehicles of various model-years and engine/transmission combinations. Read More »
This bulletin provides a procedure to determine ?repair? versus ?replacement? of an automatic transmission. This procedure is to be used ?After? the transmission has been removed from the vehicle. Read More »
This bulletin provides a procedure to determine ?repair? versus ?replacement? of an automatic transmission. This procedure is to be used ?After? the transmission has been removed from the vehicle. Read More »
Technical Bulletin (Automatic Transmission Fluid Requirements): At this time, Volkswagen Group of America, Volkswagen Canada do not support or warranty any use of aftermarket universal automatic transmission fluids or the machines used ... Read More »
When servicing the timing chain sprocket or removing the vibration damper, be aware that one bolt holds both the vibration damper (harmonic balancer) and the crankshaft timing chain sprocket to the crankshaft. Read More »
When servicing the timing chain sprocket or removing the vibration damper, be aware that one bolt holds both the vibration damper (harmonic balancer) and the crankshaft timing chain sprocket to the crankshaft. Read More »
Technical Bulletin (Slave Cylinder - Clutch Pedal Operation Diagnosis): A Customer may comment: ? Complaints on clutch system. ? After pressing the clutch pedal, it remains on the floor. Read More »
Technical Bulletin (Slave Cylinder - Clutch Pedal Operation Diagnosis): A Customer may comment: ? Complaints on clutch system. ? After pressing the clutch pedal, it remains on the floor. Read More »
Technical Bulletin (Slave Cylinder - Clutch Pedal Operation Diagnosis): Customer may comment: ? Complaints on clutch system. ? After pressing the clutch pedal, it remains on the floor. Read More »
Technical Bulletin (Slave Cylinder - Clutch Pedal Operation Diagnosis): A Customer may comment: ? Complaints on clutch system. ? After pressing the clutch pedal, it remains on the floor. Read More »
This document was created In response to multiple dealership inquires about aftermarket universal (one fluid fits all) automatic transmission fluids and transmission flushing, Volkswagen Group of America, Volkswagen Canada have prepared ... Read More »
Technical Bulletin (Automatic Transmission Fluid Requirements): At this time, Volkswagen Group of America, Volkswagen Canada do not support or warranty any use of aftermarket universal automatic transmission fluids or the machines used ... Read More »
POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
Tech Tips (Torque Converter/Flywheel/Flexplate installation): Incorrect torque converter or flywheel/flexplate installation can result in transmission damage. Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states MIL-on, fault P2422 stored in ECM Customer states front brake noise Customer states blower stays on ... Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states MIL-on with any combination of P0300, P0301, P0302, P0303, P0304, P1D74 and/or P1D75 in the ECM Customer states rattle noise from the underbody heat shields Customer ... Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states MIL-on with any combination of P0300, P0301, P0302, P0303, P0304, P1D74 and/or P1D75 in the ECM Customer states rattle noise from the underbody heat shields Customer ... Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states MIL-on with any combination of P0300, P0301, P0302, P0303, P0304, P1D74 and/or P1D75 in the ECM Customer states rattle noise from the underbody heat shields Customer ... Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states MIL-on with any combination of P0300, P0301, P0302, P0303, P0304, P1D74 and/or P1D75 in the ECM Customer states rattle noise from the underbody heat shields Customer ... Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states MIL-on with any combination of P0300, P0301, P0302, P0303, P0304, P1D74 and/or P1D75 in the ECM Customer states rattle noise from the underbody heat shields Customer ... Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states MIL-on with any combination of P0300, P0301, P0302, P0303, P0304, P1D74 and/or P1D75 in the ECM Customer states rattle noise from the underbody heat shields Customer ... Read More »
TECH TIP DENOTING POTENTIAL FOR DAMAGE OF THE DATA LINK CONNECTOR WHEN USING AFTER MARKET PLUG IN DEVICES OR SCAN TOOLS AND SUBSEQUENT DIAGNOSTIC DIRECTION. Read More »
Technical Bulletin (Engine, Misfire Diagnostic Aid): This document informs that Multiple components SHOULD NOT be replaced for 1 misfiring cylinder. Repeat repairs must be carefully addressed to identify the root cause of the concern. Read More »
Technical Bulletin: High Pressure Fuel Pump Diagnosis. Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements. Read More »
Tech Tips (Heated Rear Window, One or More Lines Inoperative): To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. Read More »
Technical Bulletin (P2014 or P2015 Intake Manifold Faults Stored in ECM Fault Memory ): Document discusses diagnosis Codes necessary to diagnosis, and potential remedy of issue. Read More »
When performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off. A hard wired internet connection is also recommended. Read More »
When performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off. A hard wired internet connection is also recommended. Read More »
Technical Bulletin (Electric Coolant Fans Continue to Run after Ignition is Switched OFF): This documentation informs it is considered normal operation for the electric coolant fans to continue to run for up to 15 minutes after the ... Read More »
Tech Tips (Comfort Module (J393) or BCM (J519) Replacement): This document informs if a comfort or body control module is replaced during normal diagnosis, make sure the factory mode has been switched OFF. Read More »
The DLC is intended for use with diagnostic scan tools and by emissions testing stations. However, aftermarket devices (i.e., drive data recorders) that connect to the DLC have now become available. Read More »
The DLC is intended for use with diagnostic scan tools and by emissions testing stations. However, aftermarket devices (i.e., drive data recorders) that connect to the DLC have now become available. Read More »
Tech Tips (Comfort Module (J393) or BCM (J519) Replacement): This document informs If a comfort or body control module is replaced during normal diagnosis, make sure the factory mode has been switched OFF. Read More »
Tech Tips (Engine Control Module Fault P130A ?Hide Cylinder?): This document informs that DTC P130A ?Hide Cylinder? indicates that excessive misfiring has occurred. Read More »
When replacing the complete vehicle lock set (all vehicle keys and lock cylinders) for any reason, be aware that the ?Adapt keys? test plan will not allow the new keys to adapt to the vehicle. Read More »
When replacing the complete vehicle lock set (all vehicle keys and lock cylinders) for any reason, be aware that the ?Adapt keys? test plan will not allow the new keys to adapt to the vehicle. Read More »
To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. The check must be performed with the engine running and heated rear window switched on. Read More »
To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. The check must be performed with the engine running and heated rear window switched on. Read More »
Use of aftermarket air filters such as cotton bed steel mesh or cone style, can cause the MAF sensor to not read accurately, affecting vehicle performance and critical monitoring functions for the diesel particulate filter. Read More »
Quick Reference Update Guide: This document informs of the corresponding software/hardware and disc availability to the customer concerns about a vehicle Read More »
Quick Reference Update Guide: This document informs of the corresponding software/hardware and disc availability to the customer concerns about a vehicle Read More »
If the remote key fob is depressed repeatedly or a button is held down while outside the remote operating range, the key remote functions may no longer operate. Read More »
If the remote key fob is depressed repeatedly or a button is held down while outside the remote operating range, the key remote functions may no longer operate. Read More »
When diagnosing a vehicle concern, and fault P130A ?Hide Cylinder? is found in the Engine Control Module (ECM), be aware that Engine Control Module (ECM) fault P130A ?Hide Cylinder? indicates a cylinder shut down and does not require ... Read More »
When diagnosing a generator charging concern, it is recommended to verify operation of the one way clutch located in the generator pulley (if equipped) before replacing generator assembly. Read More »
Technical Bulletin (Bluetooth System Identification): This document informs how to identify the various Bluetooth systems by: ? Visual Identification ? PR Code ? Part Number Read More »
Technical Bulletin (Bluetooth System Identification): This document informs of the method to understand how to identify the various Bluetooth systems by: ? Visual Identification ? PR Code ? Part ... Read More »
Technical Bulletin (Bluetooth System Identification): This document informs of the method to understand how to identify the various Bluetooth systems by: ? Visual Identification ? PR Code ? Part ... Read More »
Technical Bulletin (Bluetooth System Identification): This document informs of the method to understand how to identify the various Bluetooth systems by: ? Visual Identification ? PR Code ? Part ... Read More »
Body/Infotainment Module Software Updates: This document informs of various complaints that were addressed in software updates, and technical bulletins. Read More »
Body/Infotainment Module Software Updates: This document informs of various complaints that were addressed in software updates, and technical bulletins. Read More »
Updates (RVU): This document informs of the reflashs that took place at specific updated software levels to address the complaints of various cars. Read More »
To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. The check must be performed with the engine running and heated rear window switched on. Read More »
To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. The check must be performed with the engine running and heated rear window switched on. Read More »
If the remote key fob is depressed repeatedly or a button is held down while outside the remote operating range, the key remote functions may no longer operate. Read More »
If the remote key fob is depressed repeatedly or a button is held down while outside the remote operating range, the key remote functions may no longer operate. Read More »
If key blade is found to stick or bind when opening or closing, check position of roll pin that secures key blade to mechanism. If roll pin is sticking out on either side (as shown below), do not replace key. Read More »
If key blade is found to stick or bind when opening or closing, check position of roll pin that secures key blade to mechanism. If roll pin is sticking out on either side (as shown below), do not replace key. Read More »
Tech Tips (Instrument Cluster Production Mode): This document informs the procedure to remove the production mode setting when it is displayed in the instrument cluster. Read More »
Tech Tips (Instrument Cluster Production Mode): During PDI, or after installation of a replacement cluster, ?Pro? may be displayed in place of the odometer. The high beam indicator may be flashing in the instrument cluster as well. Read More »
Quick Reference of vehicle concerns. Includes a list of Software versions and the technical bulletin numbers that referred to the concerns Updated Read More »
Quick Reference Update Guide of the vehicles expected upgraded software level. The latest corresponding technical bulletins that address the issues, and concerns that have been had with the vehicles. Read More »
TECH TIP DENOTING POTENTIAL FOR DAMAGE OF THE DATA LINK CONNECTOR WHEN USING AFTER MARKET PLUG IN DEVICES OR SCAN TOOLS AND SUBSEQUENT DIAGNOSTIC DIRECTION. Read More »
Quick Reference of vehicle concerns. Includes a list of Software versions and the technical bulletin numbers that referred to the concerns Updated Read More »
Emissions Service Action (Certain 2010-2014 Volkswagen Vehicles with 2.0L TDI? Clean Diesel Engine ECM Software Update): The vehicle?s engine management software has been improved to assure the vehicle?s tailpipe emissions are optimized ... Read More »
Emissions Service Action: The vehicle?s engine management software has been improved to assure the vehicle?s tailpipe emissions are optimized and operating efficiently. Read More »
Technical Bulletin: Update Programming of ECM for Concerns of a Bump Sensation after Coming to a Stop. The document contains the Update programming procedure Software Version Management unit codes. Read More »
Tech Tips (SVM Update Instructions): This document informs when performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off. A hard wired internet connection is also recommended. Read More »
Quick Reference Update Guide: This document informs of the corresponding software/hardware and disc availability to the customer concerns about a vehicle Read More »
Quick Reference Update Guide: This document informs of the corresponding software/hardware and disc availability to the customer concerns about a vehicle Read More »
Tech Tips (Vehicles equipped with Premium (RCD 510) Radios ? Coding Information for Replacing ?AC? Suffix Radios with ?AF? Suffix Replacement Unit): When replacing the radio on a 2010 ? 2011 vehicle equipped with a Premium 8 (RCD 510) ... Read More »
Technical Bulletin This Technical Bulletin details the general process for carrying out a Software Version Management (SVM) software update for any Technical Bulletin (TSB) / Required Vehicle Update (RVU). Read More »
Technical Bulletin (Manifold Absolute Pressure Range / Performance Stored in ECM Fault Memory): Monitoring strategy for the manifold absolute pressure sensor is too sensitive, causing fault code P0106 to incorrectly set in the engine ... Read More »
Technical Bulletin (Update Programming of ECM for Concerns of a Bump Sensation after Coming to a Stop): Current ECM programming may cause a bump after coming to a stop, which may be felt through the chassis of the vehicle. Read More »
Updates (RVU): This document informs of the reflashs that took place at specific updated software levels to address the complaints of various cars. Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states front brake noise Customer states blind spot monitoring error in MFI Customer states blower stays on ... Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states front brake noise Customer states blind spot monitoring error in MFI Customer states blower stays on ... Read More »
Technical Bulletin: Condensation and or water droplets becomming visible on inside of exterior light lenses issue is discussed in this document Read More »
Technical Bulletin (Exterior Lights, Moisture Accumulation): This document informs of the Condensation and or water droplets visible on inside of exterior light lenses. The document also informs how to service the issue. Read More »
Technical Bulletin (Exterior Lights, Moisture Accumulation): Exterior light assemblies (headlights, taillights, fog lights, turn signals) are vented and may collect moisture on their inner surfaces, depending on humidity and other ... Read More »
Technical Bulletin (Windshield Wipers Streak or Smear): Windshield or rear window is streaked, has a snakeskin appearance, or the surface feels rough. Read More »
The indicator lamp in the I.P. for washer fluid remains illuminated and the washer reservoir is full. Validate the washer reservoir is full with the proper washer solvent (G-052-164). Read More »
The indicator lamp in the I.P. for washer fluid remains illuminated and the washer reservoir is full. Validate the washer reservoir is full with the proper washer solvent (G-052-164). Read More »
The indicator lamp in the I.P. for washer fluid remains illuminated and the washer reservoir is full. Validate the washer reservoir is full with the proper washer solvent (G-052-164). Read More »
The indicator lamp in the I.P. for washer fluid remains illuminated and the washer reservoir is full. Validate the washer reservoir is full with the proper washer solvent (G-052-164). Read More »
Technical Bulletin (Wiper Blade Inspection for Proper Warranty Coding): Wiper blade inspection guidelines for wear and tear, outside influence and factory defect. Read More »
Tech Tips (Heated Rear Window, One or More Lines Inoperative): To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. Read More »
Tech Tips (Heated Rear Window, One or More Lines Inoperative): To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. Read More »
The indicator lamp in the I.P. for washer fluid remains illuminated and the washer reservoir is full. Validate the washer reservoir is full with the proper washer solvent (G-052-164). Read More »
The indicator lamp in the I.P. for washer fluid remains illuminated and the washer reservoir is full. Validate the washer reservoir is full with the proper washer solvent (G-052-164). Read More »
The indicator lamp in the I.P. for washer fluid remains illuminated and the washer reservoir is full. Validate the washer reservoir is full with the proper washer solvent (G-052-164). Read More »
The indicator lamp in the I.P. for washer fluid remains illuminated and the washer reservoir is full. Validate the washer reservoir is full with the proper washer solvent (G-052-164). Read More »
Technical Bulletin (Wiper Blade Inspection for Proper Warranty Coding): Wiper blade inspection guidelines for wear and tear, outside influence or a factory issue. This document informs what is under coverage for wiper blade issues. Read More »
Technical Bulletin (Wiper Blade Inspection for Proper Warranty Coding): Wiper blade inspection guidelines for wear and tear, outside influence and factory defect. Read More »
Tech Tips (Washer Level Sensor issues): This document discusses approved windshield washer fluids and the damages non - approved fluids can cause. Read More »
Reporting procedure for A/C compressor replacement regardless of the reason for failure. Update to model year applicability and new warranty GFF labor operation number Read More »
Reporting procedure for A/C compressor replacement regardless of the reason for failure. Update to model year applicability and new warranty GFF labor operation number Read More »
Cleaning of Heating and Ventilation system, Updated to include additional model year applicability and cost of cleaning solution in warranty table. Read More »
Cleaning of Heating and Ventilation system, Updated to include additional model year applicability and cost of cleaning solution in warranty table. Read More »
Tech Tips (Heated Rear Window, One or More Lines Inoperative): To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. Read More »
VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:REAR WINDOW:ELECTRICAL HEATING ELEMENT
To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. The check must be performed with the engine running and heated rear window switched on. Read More »
To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. The check must be performed with the engine running and heated rear window switched on. Read More »
When replacing the Air Conditioning compressor it is necessary to flush the entire system to remove all the PAG oil. Replacement AC compressors come with a full charge of oil. Read More »
When replacing the Air Conditioning compressor it is necessary to flush the entire system to remove all the PAG oil. Replacement AC compressors come with a full charge of oil. Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states MIL-on with any combination of P0300, P0301, P0302, P0303, P0304, P1D74 and/or P1D75 in the ECM Customer states rattle noise from the underbody heat shields Customer ... Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states MIL-on with any combination of P0300, P0301, P0302, P0303, P0304, P1D74 and/or P1D75 in the ECM Customer states rattle noise from the underbody heat shields Customer ... Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states MIL-on, fault P2422 stored in ECM Customer states front brake noise Customer states blower stays on ... Read More »
Technical Bulletin (Removing Paint Contaminants from Exterior Paint): This document informs how to remove paint contaminants such as rail dust and industrial fallout from exterior paint. Read More »
Technical Bulletin (Damage on External Chrome or Aluminum Surfaces) The surfaces of chrome parts can get damaged in the production process or by external influences. Read More »
Technical Bulletin (Paint Finish, Reducing Swirl Marks and Fine Scratches): New vehicles (prior to Retail Delivery) with swirl marks and or fine scratches from polishing or cleaning. Read More »
Technical Bulletin (Paint Finish, Reducing Swirl Marks and Fine Scratches): New vehicles (prior to Retail Delivery) with swirl marks and or fine scratches from polishing or cleaning. Read More »
Technical Bulletin (Hood, Under Hood Not Painted Body Color): The paint color and/or finish of the engine compartment and underside of hood may not match the exterior paint color of the vehicle. Read More »
Technical Bulletin (Hood, Under Hood Not Painted Body Color): The paint color and/or finish of the engine compartment and underside of hood may not match the exterior paint color of the vehicle. Read More »
Customer states rattle noise from the underbody heat shields Customer states noise from front suspension Customer states blower stays on Any TDI within the vehicle/MY range Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states rattle noise from the underbody heat shields Customer states noise from front suspension Customer states blower stays on Any TDI within the vehicle/MY ... Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states rattle noise from the underbody heat shields Customer states noise from front suspension Customer states blower stays on Any TDI within the vehicle/MY ... Read More »
Technical Bulletin about Paint Finish, Reducing Swirl Marks and Fine Scratches New vehicles (prior to Retail Delivery) with swirl marks and or fine scratches from polishing or cleaning. Read More »
Tech Tips (All vehicles-Tire dressing for vehicle detailing): The use of tire dressing gives your tires that shiny finish that completes the image of a clean (new) vehicle. Read More »
The use of tire dressing gives your tires that shiny finish that completes the image of a clean (new) vehicle. There are many different tire dressing products available. When choosing a product please pay close attention to its contents. Read More »
The use of tire dressing gives your tires that shiny finish that completes the image of a clean (new) vehicle. There are many different tire dressing products available. When choosing a product please pay close attention to its contents. Read More »
Tech Tips (All vehicles-Tire dressing for vehicle detailing): The use of tire dressing gives your tires that shiny finish that completes the image of a clean (new) vehicle. Read More »
The use of tire dressing gives your tires that shiny finish that completes the image of a clean (new) vehicle. There are many different tire dressing products available. When choosing a product please pay close attention to its contents. Read More »
The use of tire dressing gives your tires that shiny finish that completes the image of a clean (new) vehicle. There are many different tire dressing products available. When choosing a product please pay close attention to its contents. Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states front brake noise Customer states blind spot monitoring error in MFI Customer states blower stays on ... Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states MIL-on, fault P2422 stored in ECM Customer states front brake noise Customer states blower stays on ... Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states front brake noise Customer states blower stays on Customer states cannot set seat memory Customer ... Read More »
Customer states rattle noise from the underbody heat shields Oil level sensor leaking Customer states front brake noise Customer states blower stays on Customer states cannot set seat memory Customer states cannot set seat memory ... Read More »
Customer states rattle noise from the underbody heat shields Oil level sensor leaking Customer states noise from front suspension Customer states blower stays on Customer states cannot set seat memory Customer states cannot set seat ... Read More »
Update incorrect model year applicability in model table. Passenger Side Heated Seat May Take Longer to Heat Up and Potentially be Lower in Temperature Read More »
When replacing the radio on a 2010 ? 2011 vehicle equipped with a Premium 8 (RCD 510) radio with part number ending in the suffix ?AC? (1K0 035 180 AC), if the replacement part has a suffix ?AF?, make sure that online coding is performed. Read More »
When replacing the radio on a 2010 ? 2011 vehicle equipped with a Premium 8 (RCD 510) radio with part number ending in the suffix ?AC? (1K0 035 180 AC), if the replacement part has a suffix ?AF?, make sure that online coding is performed. Read More »
Customer states MIL-on with P013E in the ECM Customer states MIL-on with P0087 P0149 P053F in the ECM Customer states noise during clutch pedal operation Hood release inoperative Customer states MIL-on with ... Read More »
Customer states MIL-on with P013E in the ECM Customer states MIL-on with P0087 P0149 P053F in the ECM Customer states noise during clutch pedal operation Hood release inoperative Customer states MIL-on with ... Read More »
Elsa2Go campaign information is now 100% aligned with ElsaPro. This update to Elsa2Go ensures that both systems are displaying the same campaign information, including OPEN/CLOSED status, repair date as well as criterions at the same time ... Read More »
Elsa2Go campaign information is now 100% aligned with ElsaPro. This update to Elsa2Go ensures that both systems are displaying the same campaign information, including OPEN/CLOSED status, repair date as well as criterions at the same time ... Read More »
REMOVED all 12 hour wait period before starting references. ADDED EFB to "Select correct battery type" in bottom box. Also Jetta Wagon 2005 and 2018-2020 Tiguan LWB. Read More »
REMOVED all 12 hour wait period before starting references. ADDED EFB to "Select correct battery type" in bottom box. Also Jetta Wagon 2005 and 2018-2020 Tiguan LWB. Read More »
This special notice is to inform dealers to return all part numbers listed in the document and order the superseded part numbers going forward. Read More »
This document contains the VW Elsa Newsletter that contains a general overview of wiring diagrams updates, ElsaPro infomedia icons grayed out, workshop equipment tool storage application, technical bulletins, pending service solutions, ... Read More »
Technical Bulletin: This document concerns the sensitivity of the washer solvent level sensor (G33) can be affected by the type, concentration, and the presence of additives in the washer solvent currently in the tank. Read More »
When performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off. A hard wired internet connection is also recommended. Read More »
When performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off. A hard wired internet connection is also recommended. Read More »
Technical Bulletin (Removing Paint Contaminants from Exterior Paint): This document informs how to remove paint contaminants such as rail dust and industrial fallout from exterior paint. Read More »
Technical Bulletin (Exterior Lights, Moisture Accumulation): This document informs of the Condensation and or water droplets visible on inside of exterior light lenses. The document also informs how to service the issue. Read More »
Technical Bulletin (Squeaks, Rattles, Noise, Repair Materials): This doucment contains a list of components and applications developed to repair concerns of squeaks, rattles, noise and trim fit conditions. Read More »
When replacing the complete vehicle lock set (all vehicle keys and lock cylinders) for any reason, be aware that the ?Adapt keys? test plan will not allow the new keys to adapt to the vehicle. Read More »
When replacing the complete vehicle lock set (all vehicle keys and lock cylinders) for any reason, be aware that the ?Adapt keys? test plan will not allow the new keys to adapt to the vehicle. Read More »
Tech Tips (New Beetle-Pollen Filter Removal): This document informs from mid-2007 through 2011, the New Beetle was produced without the pollen filter. Read More »
Tech Tips (All Models 2000-2014 - Part ordering): If a needed service part is on back order, upgrade the daily order to a red order and check the ?Car Down? box to escalate the order. Read More »
Tech Tips (All Models 2000-2014 - Part ordering): If a needed service part is on back order, upgrade the daily order to a red order and check the ?Car Down? box to escalate the order. Read More »
If a needed service part is on back order, upgrade the daily order to a red order and check the ?Car Down? box to escalate the order. If parts assistance is needed, please call 800-767-6552 to speak with a VWGoA Parts Specialist. Read More »
If a needed service part is on back order, upgrade the daily order to a red order and check the ?Car Down? box to escalate the order. If parts assistance is needed, please call 800-767-6552 to speak with a VWGoA Parts Specialist. Read More »
If a needed service part is on back order, upgrade the daily order to a red order and check the ?Car Down? box to escalate the order. If parts assistance is needed, please call 800-767-6552 to speak with a VWGoA Parts Specialist. Read More »
If a needed service part is on back order, upgrade the daily order to a red order and check the ?Car Down? box to escalate the order. If parts assistance is needed, please call 800-767-6552 to speak with a VWGoA Parts Specialist. Read More »
Quick Reference Update Guide: This document informs of the corresponding software/hardware and disc availability to the customer concerns about a vehicle Read More »
Warranty Information (Volkswagen DoubleCheck Labor Operations): Volkswagen DoubleCheck Labor Operations for All VW Models Except Routan ElsaWeb/Pro was updated on August 12, 2013 with the following Volkswagen DoubleCheck labor ... Read More »
In SAGA, the time units for the Volkswagen DoubleCheck labor operation were reduced in error from 50 time units to 30 time units during the system update posted on July 4th. Read More »
In SAGA, the time units for the Volkswagen DoubleCheck labor operation were reduced in error from 50 time units to 30 time units during the system update posted on July 4th. Read More »
Be aware that fuel lines are color coded on vehicles with return fuel pressure lines. The black line is for fuel pressure supply and the blue line is for fuel pressure return. Read More »
Technical Bulletin (High Pressure Fuel Pump Diagnosis): Completing the GFF high pressure pump function test is essential to diagnose proper pump operation and to avoid unnecessary replacements. Read More »
Warranty Information (Regularly Scheduled Maintenance Interval Time or Mileage Guidelines): The Volkswagen Customer Experience Team has monitored the claims processed through the Carefree Maintenance (CFM) program from its inception. Read More »
Technical Bulletin (PDI - Vehicle Inspection, Protection Removal and Detailing): This document informs of the procedure to perform when a dealer receives a car. Read More »
Technical Bulletin (Wiper Blade Inspection for Proper Warranty Coding): Wiper blade inspection guidelines for wear and tear, outside influence and factory defect. Read More »
Technical Bulletin (PDI - Vehicle Inspection, Protection Removal and Detailing): This document informs of the procedure to perform when a dealer receives a car. Read More »
Technical Bulletin (Bluetooth System Identification): This document informs of the method to understand how to identify the various Bluetooth systems by: ? Visual Identification ? PR Code ? Part ... Read More »
Technical Bulletin (Bluetooth System Identification): This document informs of the method to understand how to identify the various Bluetooth systems by: ? Visual Identification ? PR Code ? Part ... Read More »
Warranty Information (Volkswagen Amenity Subsidy Program - Revised): Volkswagen announced a new short-term program that reimburses Dealers $20 per repair order when model year 2010 ? 2013 Volkswagen customers bring in their vehicle for ... Read More »
Warranty Information (Volkswagen Amenity Subsidy Program - Revised): Volkswagen announced a new short-term program that reimburses Dealers $20 per repair order when model year 2010 ? 2013 Volkswagen customers bring in their vehicle for ... Read More »
Customer states rattle noise from the underbody heat shields Customer states coolant leak Oil level sensor leaking Customer states front brake noise Customer states blind spot monitoring error in MFI Customer states blower stays on ... Read More »
Tech Tips (ECM Fault P1250 "Fuel Level Too Low" Will Not Clear): This document informs to clear static ECM fault P1250 "Fuel Level Too Low", add fuel to vehicle and complete a road test of at least 10 miles. Read More »
Tech Tips (Bluetooth Compatibility): This document informs of the web address that can be used to check Bluetooth compatibility for all 2011, and newer vehicles, as well as 2010 Routan Read More »
Tech Tips (Bluetooth Compatibility): This document informs of the web address that can be used to check Bluetooth compatibility for all 2011, and newer vehicles, as well as 2010 Routan Read More »
Warranty Information (Volkswagen DoubleCheck Labor Operations): Volkswagen DoubleCheck Labor Operations for All VW Models Except Routan ElsaWeb/Pro was updated on August 12, 2013 with the following Volkswagen DoubleCheck labor ... Read More »
When replacing the radio on a 2010 ? 2011 vehicle equipped with a Premium 8 (RCD 510) radio with part number ending in the suffix ?AC? (1K0 035 180 AC), if the replacement part has a suffix ?AF?, make sure that online coding is performed. Read More »
When replacing the radio on a 2010 ? 2011 vehicle equipped with a Premium 8 (RCD 510) radio with part number ending in the suffix ?AC? (1K0 035 180 AC), if the replacement part has a suffix ?AF?, make sure that online coding is performed. Read More »
Technical Bulletin (Bluetooth System Identification): This document informs of the method to understand how to identify the various Bluetooth systems by: ? Visual Identification ? PR Code ? Part ... Read More »
Tech Tips (All Navigation Radios-All Models): When the Navigation RNS 850/510/315 is in 3D mode, the top portion of the screen may not display streets. This line represents the horizon and is a normal operation of system. Read More »
Technical Bulletin (Bluetooth System Identification): This document informs of the method to understand how to identify the various Bluetooth systems by: ? Visual Identification ? PR Code ? Part ... Read More »
For concerns of navigation inaccuracy, with or without antenna fault codes, begin by checking the number of received satellites in the area of the concern. Read More »
For concerns of navigation inaccuracy, with or without antenna fault codes, begin by checking the number of received satellites in the area of the concern. Read More »
When performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off. A hard wired internet connection is also recommended. Read More »
When performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off. A hard wired internet connection is also recommended. Read More »
When pairing an Android phone to the Bluetooth system, a few extra steps may be necessary. Follow the instructions below to pair the phone: Read More »
When pairing an Android phone to the Bluetooth system, a few extra steps may be necessary. Follow the instructions below to pair the phone: Read More »
Update incorrect model year applicability in model table. Passenger Side Heated Seat May Take Longer to Heat Up and Potentially be Lower in Temperature Read More »
This document contains the VW Elsa Newsletter that contains a general overview of wiring diagrams updates, technical bulletins, pending service solutions, tech tips, campaigns, updates, and suggestions. Read More »
This document contains the VW Elsa Newsletter that contains a general overview of wiring diagrams updates, ElsaPro infomedia icons grayed out, workshop equipment tool storage application, technical bulletins, pending service solutions, ... Read More »
Emissions Service Action: The vehicle?s engine management software has been improved to assure the vehicle?s tailpipe emissions are optimized and operating efficiently. Read More »
VOLKSWAGEN DEALERSHIP COMMUNICATION: The vehicle?s engine management software has been improved to assure the vehicle?s tailpipe emissions are optimized and operating efficiently for Volkswagen Vehicles Equipped with a 2. Read More »
VOLKSWAGEN DEALERSHIP COMMUNICATION: This document announced a warranty Volkswagen extension program to cover the High Pressure Fuel Pump on 2009-2012 model year TDI Clean Diesel Engine vehicles. Read More »
VOLKSWAGEN DEALERSHIP COMMUNICATION: Volkswagen announced a warranty extension program to cover the High Pressure Fuel Pump on 2009-2012 model year TDI Clean Diesel Engine vehicles Read More »
Technical Bulletin: Condensation and or water droplets becomming visible on inside of exterior light lenses issue is discussed in this document Read More »
VOLKSWAGEN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. AN EXTENSION WARRANTY, WITH SPECIFIC CONDITIONS, 10 YRS OR 120,000 MILES,WHICHEVER IS FIRST, HAS BEEN ISSUED FOR EMISSIONS CONTROL SYSTEMS WARRANTY FOR INTAKE MANIFOLD AND FUEL ... Read More »
Technical Bulletin (PDI - Vehicle Inspection, Protection Removal and Detailing): This document informs on the service a vehicle shouold received when it has successfully reached a dealership. Read More »
Beetle Perfect Delivery Inspection (PDI) - Technician and Detailer Inspections: A checklist to insure a customer receives a wonderful delivery of a vehicle that looks, feels, and meets the expectations of a new vehicle that he/she has ... Read More »
Beetle Perfect Delivery Inspection (PDI) - Technician and Detailer Inspections: A checklist to insure a customer receives a wonderful delivery of a vehicle that looks, feels, and meets the expectations of a new vehicle that he/she has ... Read More »
We would like to inform you that the FAQ for Service Action 20T8 has been revised to include additional information for dealers to share with customers about the misfueling guard. Read More »
We would like to inform you that the FAQ for Service Action 20T8 has been revised to include additional information for dealers to share with customers about the misfueling guard. Read More »
Be aware that fuel lines are color coded on vehicles with return fuel pressure lines. The black line is for fuel pressure supply and the blue line is for fuel pressure return. Read More »
Tech Tips (Technician Helpline Vehicle Check Sheets): When it becomes necessary to open a VW Technician Helpline VTA case while performing diagnosis for a diesel particulate filter, manual transmission repair, or turbocharger concern, ... Read More »
Warranty Information (Regularly Scheduled Maintenance Interval Time or Mileage Guidelines): The Volkswagen Customer Experience Team has monitored the claims processed through the Carefree Maintenance (CFM) program from its inception. Read More »
Technical Bulletin (PDI - Vehicle Inspection, Protection Removal and Detailing): This document informs of the procedure to perform when a dealer receives a car. Read More »
Technical Bulletin (Slave Cylinder - Clutch Pedal Operation Diagnosis): A Customer may comment: ? Complaints on clutch system. ? After pressing the clutch pedal, it remains on the floor. Read More »
Technical Bulletin (Slave Cylinder - Clutch Pedal Operation Diagnosis): A Customer may comment: ? Complaints on clutch system. ? After pressing the clutch pedal, it remains on the floor. Read More »
Technical Bulletin (Paint Finish, Reducing Swirl Marks and Fine Scratches): New vehicles (prior to Retail Delivery) with swirl marks and or fine scratches from polishing or cleaning. Read More »
Technical Bulletin (Paint Finish, Reducing Swirl Marks and Fine Scratches): New vehicles (prior to Retail Delivery) with swirl marks and or fine scratches from polishing or cleaning. Read More »
Technical Bulletin (Paint Finish, Reducing Swirl Marks and Fine Scratches): New vehicles (prior to Retail Delivery) with swirl marks and or fine scratches from polishing or cleaning. Read More »
Technical Bulletin (Hood, Under Hood Not Painted Body Color): The paint color and/or finish of the engine compartment and underside of hood may not match the exterior paint color of the vehicle. Read More »
Technical Bulletin (Hood, Under Hood Not Painted Body Color): The paint color and/or finish of the engine compartment and underside of hood may not match the exterior paint color of the vehicle. Read More »
Technical Bulletin (Hood, Under Hood Not Painted Body Color): The paint color and/or finish of the engine compartment and underside of hood may not match the exterior paint color of the vehicle. Read More »
Technical Bulletin (Bluetooth System Identification): This document informs of the method to understand how to identify the various Bluetooth systems by: ? Visual Identification ? PR Code ? Part ... Read More »
Warranty Information (Volkswagen Amenity Subsidy Program - Revised): Volkswagen announced a new short-term program that reimburses Dealers $20 per repair order when model year 2010 ? 2013 Volkswagen customers bring in their vehicle for ... Read More »
Body/Infotainment Module Software Updates: This document informs of various complaints that were addressed in software updates, and technical bulletins. Read More »
Updates (RVU): This document informs of the reflashs that took place at specific updated software levels to address the complaints of various cars. Read More »
Customer states MIL-on with P013E in the ECM Customer states MIL-on with P0087 P0149 P053F in the ECM Customer states noise during clutch pedal operation Hood release inoperative Customer states MIL-on with ... Read More »
Customer states MIL-on with P013E in the ECM Customer states MIL-on with P0087 P0149 P053F in the ECM Customer states noise during clutch pedal operation Hood release inoperative Customer states MIL-on with ... Read More »
Tech Tips (Test Plan to Calibrate Adaptive Cruise Control Sensors Will Not Begin notice): Notification that If the test plan to calibrate the Adaptive Cruise Control Sensors will not begin, turn off the overhead lights in the shop. Read More »
Technical Bulletin (Slave Cylinder - Clutch Pedal Operation Diagnosis): A Customer may comment: ? Complaints on clutch system. ? After pressing the clutch pedal, it remains on the floor. Read More »
Technical Bulletin (Paint Finish, Reducing Swirl Marks and Fine Scratches): New vehicles (prior to Retail Delivery) with swirl marks and or fine scratches from polishing or cleaning. Read More »
Technical Bulletin (Hood, Under Hood Not Painted Body Color): The paint color and/or finish of the engine compartment and underside of hood may not match the exterior paint color of the vehicle. Read More »
Statement referring to TB 2043893 removed. To include additional models and model year applicability. A.C. Compressor Replacement, GFF Required Regardless of Concern and Flush Requirement Read More »
Statement referring to TB 2043893 removed. To include additional models and model year applicability. A.C. Compressor Replacement, GFF Required Regardless of Concern and Flush Requirement Read More »
DIRECTION TO PERFORM SYSTEM RESET AFTER COMPONENT REPLACMENT OR DISCONNECT OF THE HVAC SYSTEM CONTROL HEAD. NO TEST PLAN INFORMATION TO ADDRESS THIS. Read More »
DIRECTION TO PERFORM SYSTEM RESET AFTER COMPONENT REPLACMENT OR DISCONNECT OF THE HVAC SYSTEM CONTROL HEAD. NO TEST PLAN INFORMATION TO ADDRESS THIS. Read More »
Technical Bulletin (Air Conditioning, Cleaning of the Refrigerant Circuit (U.S.Only)): In cases where an air conditioning system component (such as a compressor or other system component) has failed and debris from the compressor or ... Read More »
Technical Bulletin (Air Conditioning, Cleaning of the Refrigerant Circuit): In cases where an air conditioning system component (such as a compressor or other system component) has failed and debris from the compressor or component is ... Read More »
Tech Tips (AC Compressor Replacement, Refrigerant Circuit Flushing Requirement): This document informs when replacing the Air Conditioning compressor it is necessary to flush the entire system to remove all the PAG oil. Read More »
Tech Tips (New Beetle-Pollen Filter Removal): This document informs from mid-2007 through 2011, the New Beetle was produced without the pollen filter. Read More »
Customer states rattle noise from the underbody heat shields Customer states noise from front suspension Customer states blower stays on Any TDI within the vehicle/MY range Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states rattle noise from the underbody heat shields Customer states noise from front suspension Customer states blower stays on Any TDI within the vehicle/MY ... Read More »
Customer states MIL-on with P0087 P053F in the ECM Customer states rattle noise from the underbody heat shields Customer states noise from front suspension Customer states blower stays on Any TDI within the vehicle/MY ... Read More »
VOLKSWAGEN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. AN EXTENSION WARRANTY, WITH SPECIFIC CONDITIONS, 10 YRS OR 120,000 MILES,WHICHEVER IS FIRST, HAS BEEN ISSUED FOR EMISSIONS CONTROL SYSTEMS WARRANTY FOR INTAKE MANIFOLD AND FUEL ... Read More »
To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. The check must be performed with the engine running and heated rear window switched on. Read More »
To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. The check must be performed with the engine running and heated rear window switched on. Read More »
To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear. Read More »
To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear. Read More »
To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear. Read More »
To clear static ECM fault P1250 ?Fuel Level Too Low?, add fuel to vehicle and complete a road test of at least 10 miles. Simply adding fuel without completing a road test may not allow fault to clear. Read More »
