Technical Service Bulletins (TSBs) for the 2015 WRX STI are official communications between Subaru & their dealerships that describe processes for troubleshooting or fixing certain common problems.
All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
This bulletin announces a design change to the front strut mounts intended to address customer concerns of a popping-type sound which may be heard when making low speed turns. Read More »
This service Information bulletin provides precautions to follow when servicing the Brembo brake calipers utilized on the models listed. Because of their aluminum construction, it is critcal to take extra care when servicing. Read More »
This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. Read More »
This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. Read More »
This bulletin announces availability of reprogramming files for optimization of the ECM. The files will address customer concerns of a lack of engine power output resulting from reduced turbocharger boost at high ambient temperatures ... Read More »
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH ... Read More »
This bulletin announces availability of reprogramming files to optimize the Engine Control Module (ECM). The new files will address DTC P0116 and hard starting in cold temperature concerns when an accessory engine block heater is utilized. Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
This Service Information bulletin announces a design change to the internal contact portion of the oil pressure switch to increase durability Read More »
This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Read More »
This bulletin informs of a design change to the reverse idler gear and its internal spring along with a revised assembly procedure. The only purpose for the change was to enhance production efficiency. Read More »
This Service Information Bulletin announces a change to the procedure and sequence used for torqueing the cylinder head bolts on the EJ25 turbocharged engine used in the 2015-2018MY STI. Read More »
This Service Information Bulletin announces a change to the procedure and sequence used for torqueing the cylinder head bolts on the EJ25 turbocharged engine used in the 2015-2018MY STI. Read More »
ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
This Service Information Bulletin announces a change to the procedure and sequence used for torqueing the cylinder head bolts on the EJ25 turbocharged engine used in the 2015-2018MY STI. Read More »
ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:OIL COOLER
Effective with all 2015 model year cars and forward, the oil change interval is changing to 6,000 miles or 6 months, whichever comes first. Read More »
FUEL (GASOLINE) FILLER DOOR (FLAP) DOES NOT OPEN - THIS BULLETIN PROVIDES NEW PART NUMBER INFORMATION ALONG WITH A SERVICE PROCEDURE TO ADDRESS A CUSTOMER CONCERN OF THE FUEL FILLER DOOR NOT OPENING WHEN LIFTING THE INTERIOR RELEASE LEVER. Read More »
This Service Information bulletin announces a change to the shape of the rubber cap used on the flange nuts securing the sub-level sending unit to the fuel tank. In addition, two of the caps are now used in production instead of only one. Read More »
This bulletin announces availability of reprogramming files for optimization of the ECM. The files will address customer concerns of a lack of engine power output resulting from reduced turbocharger boost at high ambient temperatures ... Read More »
FUEL (GASOLINE) FILLER DOOR (FLAP) DOES NOT OPEN - THIS BULLETIN PROVIDES NEW PART NUMBER INFORMATION ALONG WITH A SERVICE PROCEDURE TO ADDRESS A CUSTOMER CONCERN OF THE FUEL FILLER DOOR NOT OPENING WHEN LIFTING THE INTERIOR RELEASE LEVER. Read More »
THIS SERVICE INFORMATION BULLETIN SERVES AS A REMINDER TO ALWAYS FOLLOW THE PROPER PROCEDURES WHEN DIAGNOSIS OF A DTC B1500 LEADS TO REPLACEMENT OF A FAULTY MAIN AND / OR SUB FUEL LEVEL SENSOR. Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2015-2021 model year WRX STI vehicles, which may contain a defective back-up lamp switch. Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2015-2021 model year WRX STI vehicles, which may contain a defective backup lamp switch. Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2015-2021 model year WRX STI vehicles, which may contain a defective back-up lamp switch. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the turbocharged 2. Read More »
This bulletin informs of a design change to the reverse idler gear and its internal spring along with a revised assembly procedure. The only purpose for the change was to enhance production efficiency. Read More »
This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Read More »
This Service Information bulletin announces a design change made to the rubber timing hole access plug to improve its retention and prevent water intrusion into the converter case. Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2015-2021 model year WRX STI vehicles, which may contain a defective back-up lamp switch. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. is extending the New Car Basic Warranty coverage for the 12 Volt batteries used in the above listed models and model years beyond the original three (3) years or thirty six ... Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2015-2021 model year WRX STI vehicles, which may contain a defective back-up lamp switch. Read More »
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. is extending the New Car Basic Warranty coverage for the 12 Volt batteries used in the above listed models and model years beyond the original three (3) years or thirty six ... Read More »
In the interest of customer satisfaction, Subaru of America, Inc. is extending the New Car Basic Warranty coverage for the 12 Volt batteries used in the above listed models and model years beyond the original three (3) years or thirty six ... Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2015-2021 model year WRX STI vehicles, which may contain a defective back-up lamp switch. Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2015-2021 model year WRX STI vehicles, which may contain a defective back-up lamp switch. Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2015-2021 model year WRX STI vehicles, which may contain a defective backup lamp switch. Read More »
This bulletin has been developed to outline the steps for gathering basic essential information during diagnosis and repair of the Infotainment concerns. (Applicable to all models with Harman or Denso CP1 Infotainment). Read More »
This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation a??Gen 2a?? and a??Gen 2.1a?? F10 Navigation and Display Audio systems. Read More »
This bulletin announces availability of reprogramming files to optimize the Engine Control Module (ECM). The new files will address DTC P0116 and hard starting in cold temperature concerns when an accessory engine block heater is utilized. Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
This bulletin announces availability of a new HVAC blower motor unit assemblies developed to address isolated concerns of the blower motor becoming inoperative. Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2. Read More »
"This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: a?? Power windows inoperative from the drivera??s door master and / or passenger front door switch a?? ... Read More »
This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ? Power windows inoperative from the driver?s door master and / or passenger front door switch ? Unable to ... Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the turbocharged 2. Read More »
This bulletin announces a design change to the EPB adapter cord harness connector. In some cases, the retaining tab of the connector may become damaged as a result of removal or installation for diagnosis and later and cause DTC C1956 or ... Read More »
This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Read More »
This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Read More »
THIS SERVICE INFORMATION BULLETIN IS INTENDED TO PROVIDE HELPFUL INSIGHT TO USE WHEN RESPONDING TO CUSTOMER INQUIRIES INVOLVING THE PAIRING AND USE OF CELLULAR PHONES WITH CLARION AUDIO UNITS. Read More »
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. is extending the New Car Basic Warranty coverage for the 12 Volt batteries used in the above listed models and model years beyond the original three (3) years or thirty six ... Read More »
This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully. Read More »
All 2012 to 2015 Models Equipped with Fujitsu Ten (F10) Generation 1 (Gen1) Audio / Navigation Systems. This bulletin announces a new procedure for updating the operating software used in F10 Gen1 audio / navigation systems. Read More »
Although Fujitsu TEN (F10) Navigation units utilize an externally (faceplate) accessible MicroSD memory card, the MicroSD card used in Clarion display audio units is internal and not accessible. Read More »
SERVICE MANUAL CORRECTIONS - THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2015-2021 model year WRX STI vehicles, which may contain a defective backup lamp switch. Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2015-2021 model year WRX STI vehicles, which may contain a defective back-up lamp switch. Read More »
This bulletin announces a design change to the headlamp assembly to improve sealing and prevent moisture intrusion. This condition may result from a slight misalignment of the attaching points during the headlamp assembly process. Read More »
THIS BULLETIN PROVIDES A REVISED ADJUSTMENT PROCEDURE TO BE USED WHEN DIAGNOSING BRAKE LIGHT SWITCH (BLS) -RELATED DTCS C1531 AND/OR C0054. IF THE BLS IS OUT OF ADJUSTMENT, THE ABS AND/OR VDC WARNING LAMP MAY ILLUMINATE. Read More »
"This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: a?? Power windows inoperative from the drivera??s door master and / or passenger front door switch a?? ... Read More »
This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ? Power windows inoperative from the driver?s door master and / or passenger front door switch ? Unable to ... Read More »
This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Read More »
This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Read More »
This bulletin announces a change to the procedure used in production of the rear door glass assembly. The bottom edge of the door glass is pressed into a metal channel lined with rubber. Read More »
"This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: a?? Power windows inoperative from the drivera??s door master and / or passenger front door switch a?? ... Read More »
SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
IMPORTANT: This Service Bulletin has been as been replaced by TSB 12-243-18 dated 6/6/2018 entitled ?Paint Chipping between Hood Grille (Scoop) and Hood?. Read More »
This bulletin replaces TSB 12-201-16R and provides a new repair procedure to address customer concerns of the hood scoop scrubbing the finish of the hood panel in the areas shown in the photo. Read More »
This bulletin announces a design change to the front door checkers used on the models listed. The new checker mechanism provides a more ?positive feel? of the detents or check positions as the front doors are opened and closed. Read More »
This bulletin provides information about changes made to the rear shelf trim to address customer concerns of a rattling sound heard while driving over bumpy / rough roads. Read More »
Paint Chipping between Hood Grille (Scoop) and Hood - This new bulletin replaces TSB 12-186-15 and announces a new repair procedure to address customer concerns of the hood scoop scrubbing the finish of the hood panel in the areas shown ... Read More »
This bulletin outlines changes made to the rear shelf trim to address customer concerns of a rattling sound heard while driving over bumpy / rough roads. Read More »
This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully. Read More »
This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully. Read More »
This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully. Read More »
This bulletin announces availability of a new front door checker mechanism designed to hold the doors more securely when they are in partially open / closed positions. An additional detent position has also been added. Read More »
SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. Read More »
THIS BULLETIN ANNOUNCES AVAILABILITY OF A REVISED FRONT DOOR CHECKER MECHANISM DESIGNED TO HOLD THE FRONT DOORS MORE SECURELY WHEN THEY ARE IN PARTIALLY OPEN POSITIONS. AN ADDITIONAL DETENT POSITION HAS ALSO BEEN ADDED. Read More »
This bulletin announces availability of a new front door checker mechanism designed to hold the doors more securely when they are in partially open / closed positions. An additional detent position has also been added. Read More »
THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO ENHANCE THE OPERATION OF THE TRUNK LATCH MECHANISM AND PREVENT IT FROM RELEASING IMMEDIATELY AFTER CLOSING. Read More »
PAINT CHIPPING DUE TO TRUNK LID MOVEMENT - THIS BULLETIN PROVIDES A PROCEDURE FOR HOW TO ADDRESS A CUSTOMER CONCERN OF SIDE-TO-SIDE TRUNK PANEL MOVEMENT AND POSSIBLE CONTACT WITH THE CORRESPONDING TOP EDGES OF THE QUARTER PANELS. Read More »
This new bulletin replaces TSB 12-186-15 and announces a new repair procedure to address customer concerns of the hood scoop scrubbing the finish of the hood panel in the areas shown in the photo below. Read More »
This bulletin announces a repair procedure to address customer concerns of the hood scoop scrubbing the finish of the hood panel in the areas shown in the photo below. Read More »
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully. Read More »
This new bulletin replaces TSB 12-186-15 and announces a new repair procedure to address customer concerns of the hood scoop scrubbing the finish of the hood panel in the areas shown in the photo below. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin announces availability of a redesigned stay (reinforcement) to address isolated customer concerns of a creaking-type sound from the r/rear seat cushion / backrest hinge area. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin announces a design change made to the front seat outer hinge cover trim panels. In some cases, when exiting the vehicle, the trim panel may inadvertently get kicked and become dislodged from the seat cushion assembly. Read More »
All Models Listed with Seat Lifter Feature. This bulletin provides a procedure to address a customer reported cosmetic condition of surface rust appearing on the inner seat cushion frame of the front seat assemblies. Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2015-2021 model year WRX STI vehicles, which may contain a defective back-up lamp switch. Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2015-2021 model year WRX STI vehicles, which may contain a defective back-up lamp switch. Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2015-2021 model year WRX STI vehicles, which may contain a defective back-up lamp switch. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. is extending the New Car Basic Warranty coverage for the 12 Volt batteries used in the above listed models and model years beyond the original three (3) years or thirty six ... Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2015-2021 model year WRX STI vehicles, which may contain a defective back-up lamp switch. Read More »
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
This bulletin announces the recommended cleaning procedures to followed when encountering vehicles with long time exposure to pollen on painted surfaces on vehicles imported from Japan. This bulletin does not apply to SIA built vehicles. Read More »
In the interest of customer satisfaction, Subaru of America, Inc. is extending the New Car Basic Warranty coverage for the 12 Volt batteries used in the above listed models and model years beyond the original three (3) years or thirty six ... Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2015-2021 model year WRX STI vehicles, which may contain a defective back-up lamp switch. Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. Read More »
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2015-2021 model year WRX STI vehicles, which may contain a defective backup lamp switch. Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
This bulletin announces availability of new front wheel hub assemblies incorporating bearing surfaces having increased resistance to imperfections resulting from shock loads. Read More »
To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
This bulletin outlines changes made to the rear shelf trim to address customer concerns of a rattling sound heard while driving over bumpy / rough roads. Read More »
The purpose of this bulletin is to provide a desription of current changes to service manuals available via the Subaru Technical Information System (STIS) web site. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2. Read More »
This Service Information bulletin announces a design change made to the retaining bolt used to secure the child anchors to the rear shelf plates on the models listed above. Read More »
To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool. Read More »
This Service Information bulletin announces a design change made to the rubber timing hole access plug to improve its retention and prevent water intrusion into the converter case. Read More »
This Service Information Bulletin announces a change to the procedure and sequence used for torqueing the cylinder head bolts on the EJ25 turbocharged engine used in the 2015-2018MY STI. Read More »
This bulletin announces a design change to the A/C Condenser receiver-dryer assembly. The change involves the addition of a rubber end cap and retaining clip onto the bottom of the receiver-dryer tank portion to prevent corrosion ... Read More »
This bulletin announces a design change to the front door checkers used on the models listed. The new checker mechanism provides a more ?positive feel? of the detents or check positions as the front doors are opened and closed. Read More »
This bulletin provides details regarding a new oil filler tube o-ring developed to address engine oil seepage concerns. This seepage may accumulate along the bottom sealing surface of the rocker cover. Read More »
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
This bulletin provides information about changes made to the rear shelf trim to address customer concerns of a rattling sound heard while driving over bumpy / rough roads. Read More »
Paint Chipping between Hood Grille (Scoop) and Hood - This new bulletin replaces TSB 12-186-15 and announces a new repair procedure to address customer concerns of the hood scoop scrubbing the finish of the hood panel in the areas shown ... Read More »
When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. Read More »
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. Read More »
THIS BULLETIN PROVIDES INFORMATION ABOUT CHANGES MADE TO THE REAR SHELF TRIM TO ADDRESS CUSTOMER CONCERNS OF A RATTLING SOUND HEARD WHILE DRIVING OVER BUMPY / ROUGH ROADS. Read More »
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH ... Read More »
GEAR OIL LEAKING FROM REAR DIFFERENTIAL COVER - THIS BULLETIN PROVIDES A REPAIR PROCEDURE TO ADDRESS A CUSTOMER CONCERN OF A GEAR OIL LEAK FROM THE REAR DIFFERENTIAL COVER AREA. Read More »
"THIS BULLETIN ANNOUNCES A CHANGE TO THE DCCD CONTROL MODULE TO PREVENT UNNECESSARY ILLUMINATION OF THE DCCD WARNING LIGHT. THE LOGIC IN THE DCCD MODULE CAN DETECT DIFFERENCES IN TIRE CIRCUMFERENCE DUE TO TIRE SIZE / WEAR INCONSISTENCIES. Read More »
This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems. Read More »
THIS BULLETIN REVIEWS TWO POSSIBLE CAUSES FOR A ?PLEASE CHECK AUDIO SYSTEM? MESSAGE TO APPEAR IN THE MFD ON THE ABOVE LISTED VEHICLES. IT IS VERY IMPORTANT TO INTERVIEW THE CUSTOMER CAREFULLY TO DETERMINE WHICH REPAIR IS REQUIRED. Read More »
THIS BULLETIN REVIEWS TWO POSSIBLE CAUSES FOR A ?PLEASE CHECK AUDIO SYSTEM? MESSAGE TO APPEAR IN THE MFD ON THE ABOVE LISTED VEHICLES. IT IS VERY IMPORTANT TO INTERVIEW THE CUSTOMER CAREFULLY TO DETERMINE WHICH REPAIR IS REQUIRED. Read More »
All 2012 to 2015 Models Equipped with Fujitsu Ten (F10) Generation 1 (Gen1) Audio / Navigation Systems. This bulletin announces a new procedure for updating the operating software used in F10 Gen1 audio / navigation systems. Read More »
This bulletin provides information to help diagnose and address different conditions relating to customer concerns which may arise when operating the new-generation ?Gen 2? and ?Gen 2.1? F10 Navigation and Display Audio systems. Read More »
Although Fujitsu TEN (F10) Navigation units utilize an externally (faceplate) accessible MicroSD memory card, the MicroSD card used in Clarion display audio units is internal and not accessible. Read More »
Revised TSB. Models with "Gen 2" F10 Audio/Navigation Systems. ?Gen 2? & ?Gen 2.1? Operating Tips. This bulletin provides information to help diagnose and address different s relating to customer concerns which may arise when ... Read More »
In the interest of customer satisfaction, Subaru of America, Inc. (SOA) is extending the New Car Limited Powertrain Warranty coverage for the turbocharged 2. Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. Read More »
When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. Read More »
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. Read More »
When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. Exchange order entry will now request a date and time when condition was last duplicated. Read More »
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. Read More »
THIS SERVICE INFORMATION BULLETIN PROVIDES INSTRUCTIONS AND PRECAUTIONS TO HELP PROTECT THE PAINT FINISH AND THE ADJACENT BODY GARNISH EDGE AREAS WHEN REMOVING OR REINSTALLING THE SIDE SPOILER ASSEMBLY. Read More »
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. Read More »
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. Read More »
SERVICE MANUAL CORRECTIONS - THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This Service Information Bulletin announces a change to the procedure and sequence used for torqueing the cylinder head bolts on the EJ25 turbocharged engine used in the 2015-2018MY STI. Read More »
This Service Information Bulletin announces a change to the procedure and sequence used for torqueing the cylinder head bolts on the EJ25 turbocharged engine used in the 2015-2018MY STI. Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2. Read More »
When ordering exchange units from Fujitsu Ten through their online web site, some new information will soon be requested and in some cases required. Read More »
Revised TSB. The Subaru Lock Information Site (SLIS) is located at http://lockinfo.subaru.com, and provides information on how to obtain immobilizer codes and key cut codes for Subaru vehicles from the 2000MY to present. Read More »
This bulletin announces availability of a new HVAC blower motor unit assemblies developed to address isolated concerns of the blower motor becoming inoperative. Read More »
A design change was made to the blower motor assembly to address the following customer concerns: ? Blower fan is either inoperative or only operates on high speed. ? Excessive rotational-type sound heard when the fan is operating. Read More »
This bulletin announces a design change to the A/C Condenser receiver-dryer assembly. The change involves the addition of a rubber end cap and retaining clip onto the bottom of the receiver-dryer tank portion to prevent corrosion ... Read More »
This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Read More »
