- November 12: Chrysler 300 and Dodge Charger Door Panels Warp: Lawsuit news | 8 days ago
- November 3: Ram 1500 Recalled For Stability Control Problems recalls | 17 days ago
- October 31: Ram 1500 Classic Heated Trailer Tow Mirror Glass May Detach recalls | 20 days ago
- October 5: Recall: Ram 1500 Turn Signals May Not Self-Cancel recalls | 46 days ago
- September 30: ZF-TRW Airbag Failure Investigation Closed investigations | 51 days ago
Ram TSB #9003357
2013 Ram 3500
TSB Document:
Affected Component: EQUIPMENT
- Summary
- ADAPTER, Engine Oil Filter (Pentastar V6) Engineering is seeking information regarding OFA leaks. Questions/info can be directed to: Bob Jackson (248) 944-0466 - bob.jackson@fcagroup.com Ron Dallison (248-292-9510) ron.dallison@fcagroup.com Joe Lovell (734) 309-6467 - joe.lovell@fcagroup.com If no response in 15 minutes, proceed with repair. All vehicles equipped with a 3.2L or 3.6L except for model year 2014 vehicles with leak concern: 1) Ensure the Oil Filter Adapter (OFA) Cap O-ring is seated in the proper groove in the cap and not damaged or cut. 2) If replacing the (OFA) due to a leak detected between (OFA) and block. Ensure the torque on the 5 bolts are torqued to 12nm. If not record the actual values, torque to 12nm and contact the FCA employees listed below. 3) Remove the (OFA) and replace the O-ring and gaskets only (Kit #68191356A$), NOT THE OFA. 4) If oil was drained, add oil dye to ensure the leak is repaired. For model year 2014 vehicles replace the Oil Filter Adaptor.
Click a tab for more information.