- September 30: ZF-TRW Airbag Failure Investigation Closed investigations | 2 days ago
- September 21: Toyota Corolla Cross Hybrid SUVs Recalled For Hard Brake Pedals recalls | 11 days ago
- September 14: Ram 1500 Electric Power Steering Problems Cause Lawsuit news | 18 days ago
- September 7: Nearly 1.4 Million Ram 1500 Trucks Recalled Over Software Errors recalls | 25 days ago
- September 5: HEMI Tick Lawsuit Includes 5.7-liter and 6.4-liter Engines news | 27 days ago
Ram TSB #05191925A
2019 Ram 1500
TSB Document:
Affected Component: ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY
- Summary
- Radiator If vehicle comes in for transmission fluid leaking from trans-oil cooler fittings on the radiator, please check the following before replacing the radiator/cooler:~ 1. Remove both of the transmission lines from the cooler?s top/bottom flared fittings on the radiator. ~ 2. Loosen the hex nut on the top flared fitting on the radiator tank.~ 3. Torque the top flared fitting to 235 +/- 15 Lb-In.~ 4. Torque hex nut to 100 +/- 10 Lb-In.~ 5. Repeat for bottom flared fitting.~ 6. Reinstall transmission line per normal installation procedures and ensure correct fluid level.~ ~ If vehicle is in need of a new radiator for another reason, check the new radiator for correct torque on the trans-oil cooler fitting per steps 2-5 above.~ ~ If radiator has a yellow mark by the trans-oil cooler fittings the torque does not have to be checked.
Click a tab for more information.