2018 ALTIMA AND SENTRA; DO NOT ERASE DTC P0315
This bulletin applies to vehicles equipped with a 4-cyl (non-turbo) engine only.
SERVICE INFORMATION
If DTC P0315 is stored on an Applied Vehicle, do not erase it.
If DTC P0315 is stored, the description on the CONSULT-III plus screen will be listed as:
(TBD) Crankshaft Position System Variation Not Learned.
If you find DTC P0315 stored, please note the following:
- Do not erase the DTC.
- It will not turn ON the MIL.
- No diagnosis or repair is necessary.
- It will clear itself after a few trips with normal operation of the vehicle.
NOTE: If DTC P0315 is erased with C-III plus, the ECM will restart the learning pattern:
- The DTC may be stored again before the learning/driving pattern is complete.
- The MIL will not come ON.
- The DTC will clear itself after a few trips with normal operation of the vehicle.
