IF YOU CONFIRM: - The engine has an over temp condition. - The radiator fan does not operate. - The 40A fusible link for the fan shroud and motor assembly (cooling fan or radiator fan) is open or has no continuity. NOTE: - The MIL may be ON with DTC P1217 (ENG OVER TEMP) stored in the ECM. - The customer may state the A/C does not produce cold air as defined in the Electronic Service Manual. ACTION: 1. Compare the vehicle?s current ECM part number to those listed in Table A (see page 6). 2. If the ECM part number matches one listed in Table A, reprogram the ECM. 3. Replace the 40A fusible link. 4. Replace the fan shroud and motor assembly (cooling fan/radiator fan). 5. Inspect the engine room harness, replace as necessary. 6. Verify cooling system operation and related engine condition. See this bulletin for further detail.
