"2011-2015 ROGUE AND ROGUE SELECT; REDUCED PERFORMANCE DUE TO CVT FLUID TEMPERATURE PROTECTION LOGIC
IF YOU CONFIRM
THE VEHICLE SPEED IS, OR WAS, REDUCED BY THE CVT FAIL-SAFE (REDUCED VEHICLE SPEED) AFTER CONTINUOUS OPERATION UNDER THE FOLLOWING CONDITIONS:
- HIGH RPM AND/OR HIGH SPEED DRIVING (RPM OF 4000+ OR SPEEDS OF 65 MPH [104.6 KM/H] FOR 1.0 – 1.5 HRS. OR MORE)
- DRIVING IN AMBIENT TEMPERATURE OF 96 DEGREES OR HIGHER
- CLIMBING STEEP OR EXTENDED HILLS FOR 6 MILES (9.6 KM) OR MORE
- WHINE OR RATTLE TYPE NOISE OCCURRING DURING REDUCED ENGINE PERFORMANCE (VEHICLE SPEED DECREASE)
NOTE: BEFORE APPLYING THIS BULLETIN, CHECK FOR AND REPAIR ANY DTCS FIRST.
ACTION
1. PERFORM SELF-DIAGNOSIS WITH CONSULT-III PLUS (C-III PLUS).
- IF DTCS ARE PRESENT, REFER TO THE APPROPRIATE SECTION OF THE ELECTRONIC SERVICE MANUAL (ESM) AND DIAGNOSE THE DTCS FIRST BEFORE PROCEEDING TO STEP 2 BELOW.
2. CHECK THE NUMBER OF COUNTS OF ""CVT-A” WITH C-III PLUS.
- REFER TO THE FLOW CHART ON PAGE 2 AND THE SERVICE PROCEDURE STARTING ON PAGE 3 TO CONFIRM IF THIS BULLETIN APPLIES."
