NISSAN; INTELLIGENT KEY INITIALIZATION PROCEDURE STOPS OR WILL NOT CONTINUE
SERVICE INFORMATION
When the initialization procedure being performed with a new or existing Intelligent Key to an applied vehicle is interrupted (the procedure stops or will not continue), the BCM may be
left in learn mode and will not function until it returns to normal mode. Under this condition, the BCM and Intelligent Key(s) will not function normally. If this condition occurs, the BCM
must be returned to normal mode and the initialization procedure started over.
To get back to the beginning of the Initialization procedure, use one of the following procedures:
- Successfully perform the initialization procedure using one of the original Intelligent Keys twice consecutively.
- Each successful initialization will follow with two (2) quick tones.
OR
- When the initialization procedure cannot be successfully performed twice (more than two quick tones), perform the initialization procedure five (5) times using the inoperative ?failed? Intelligent Key.
- Initialization does not need to be successful when performed five times.
When returning to normal operating mode, the initialization procedure for all Intelligent Keys may be started again.
