- July 5: Mazda Connect Infotainment Problems Cause Lawsuit news | 17 days ago
- June 22: Mazda Valve Stem Seal Settlement Reached news | 30 days ago
- May 28: Automatic Emergency Braking Standard by September 2029 news | 55 days ago
- May 23: Mazda Automatic Emergency Braking Recalls Affects CX-90 SUVs recalls | 60 days ago
- May 16: Mazda SKYACTIV-G 2.5T Engine Reliability Challenged in Lawsuit news | 67 days ago
Mazda TSB #09-048-22
2021 Mazda MAZDA3
TSB Document:
Affected Component: ELECTRICAL SYSTEM
- Summary
- Some vehicles may exhibit the following symptoms with DTC P05A0:00 (Active air shutter and the opening angle abnormality (sticking)) stored in memory. Symptom 1 [Mazda3 and CX-30]: The active air shutter is working, but DTC P05A0:00 is stored in memory. Cause 1: This is caused by improper control software of the PCM detecting the DTC immediately without performing the failsafe operation. When the active air shutter detects unusual torque, it is designed to repeat the open/close cycles up to three times as a failsafe to try to remove the object(s) which temporarily disturbed the movement. Symptom 2 [Mazda3, CX-30 and MX-30]: The active air shutter is frozen by snow and/or ice under freezing temperatures with DTC P05A0:00 stored in memory. Cause 2 [Mazda3 and CX-30]: When a temporary blocking of the active air shutter is expected to be caused by snow and/or ice and the intake air temperature is above the freezing point, DTC P05A0:00 may be unintentionally detected. [MX-30]: When a temporary blocking of the active air shutter is expected to be caused by snow and/or ice and the heater is turned on, DTC P05A0:00 may be unintentionally detected
Click a tab for more information.