- September 1: Ford Nano EcoBoost Engine Recall: Intake Valves Break recalls | 64 days ago
- August 18: Ford Backup Camera Recalls Allegedly Failed, Says Lawsuit news | 78 days ago
- August 17: Ford Ranger and Lincoln Nautilus Recalled Over Window Reversal Feature recalls | 79 days ago
- August 14: Ford and Mazda Issue 'Do Not Drive' Warnings recalls | 82 days ago
Lincoln TSB #SSM 47204
2015 Lincoln MKZ
TSB Document:
Affected Component: ENGINE AND ENGINE COOLING
- Summary
- Some 2015-2018 Fusion/MKZ/MKC/Escape/Edge vehicles equipped with a 2.0L EcoBoost engine may exhibit a runs rough condition with DTCs P0300, P0301, P0302, P0303, P0304 and/or P0316. This may be due to coolant intrusion due to corrosion on the engine block. To diagnose this concern, with the engine at normal operating temperature, pressurize the cooling system to 138 kPa (20 psi) and hold for 5 hours. If the coolant pressure drops 27.57 kPa (4psi), remove the spark plugs and inspect for coolant in the cylinders. If coolant is found in any of the cylinders, replace the engine long block assembly. Follow normal prior approval process for your Dealership. However, follow the diagnostic repair procedure in this article to determine correct repair. For claiming, use causal part 6006 and applicable labor operations in Section 6 of the SLTS Manual.
Click a tab for more information.