"CONCERN
L405 OR L494 ONE OR MORE CONCERNS WITH ACCESSORY
DEPLOYABLE SIDE STEPS (DSS):
1. DYNAMIC RESPONSE PIPES CONTACT DEPLOYABLE SIDE
STEP BRACKET.
2. FREE PLAY IN DEPLOYABLE SIDE STEP MOUNTING
BRACKET
3. DEPLOYABLE SIDE STEP MODULE INITIALISATION
4. DEPLOYABLE SIDE STEP FITTING – TAP HOLE INSTRUCTION
5. DEPLOYABLE SIDE STEP SELF-TEST PROCEDURE
ACTION
1. IF IT IS NOTICED VISUALLY OR AUDIBLY THAT THE DYNAMIC
RESPONSE PIPES ARE FOULING THE SIDE STEP BRACKET
THEN PLEASE REFER TO TSB LTB00588
2. IF THE FRONT END OF THE DEPLOYABLE SIDE STEP IS
FOUND TO BE LOOSE WHEN DEPLOYED, ADD 1 ADDITIONAL
SHIM TO THE INNER MOUNTING POINT ON THE FRONT OF THE
BRACKET – SEE ATTACHED FILE – SIDE STEP EXTRA SHIM
FITMENT. PDF
3. WHEN CONDUCTING THE INITIALISATION PROCEDURE,
SHOULD THE DEPLOYABLE SIDE STEPS NOT FUNCTION
PLEASE SEE THE ATTACHED FILE – INITIALISATION OF
DSS.PDF
4. FROM VIN 120000 L405 AND VIN 300000 L494,
SHOULD DEPLOYABLE SIDE STEPS & TUBES REQUIRE
FITMENT THEN ALL THE LOCATION BOSSES WILL REQUIRE
TAPPING OUT. THE SRO TIME ALLOWANCE HAS NOW
BEEN INCLUDED IN THE FITMENT SRO.
5. SHOULD A DEALER OR CUSTOMER REPORT A CONCERN WITH
THE DEPLOYABLE SIDE STEP SYSTEM OPERATION, THEN
AT THE FIRST INSTANCE PLEASE USE THE DSS - ON
DEMAND SELF TEST PROCEDURE WITHIN SDD TO
VALIDATE THE SYSTEM. PLEASE SEE THE ATTACHED FILE –
SELF TEST DSS.PDF"
