- December 17: Jeep Renegade Recall: Bumper Backup Light Problems recalls | 5 days ago
- November 26: 2024 Jeep Grand Cherokees May Show The Wrong Vehicle Speeds recalls | 26 days ago
- November 15: Jeep Power Steering Pump Fire Risk Causes Lawsuit news | 37 days ago
- November 14: Dodge Durangos and Jeep Grand Cherokees Recalled Over ABS Modules recalls | 38 days ago
- October 25: Jeep 4xe FORM Class Action Lawsuit Moves Forward news | 58 days ago
Jeep Engineering Analysis EA07007: ENGINE STALLING
2006 Jeep Commander
ENGINE STALLING
Electrical System
Engine And Engine Cooling
Power Train:Automatic Transmission:Control Module (Tcm/Pcm/Tecm)
- Summary
- On May 5, 2008, Chrysler llc (Chrysler) submitted a defect information report to NHTSA concerning an engine calibration issue that could result in engine stall in approximately 24,461 model year (MY) 2006 Jeep Commander vehicles equipped with the 4.7L V-8 engine and built from February 25, 2005 through January 11, 2006.according to Chrysler, the powertrain control module (PCM) was programmed with software that may allow the engine to stall during certain operating conditions.Chrysler dealers will reprogram the PCM software in the recalled vehicles. Information provided by Chrysler during PE07-009 and EA07-007 indicated that a revised engine calibration was implemented in production effective January 12, 2006 for the MY 2006 Jeep Commander vehicles equipped with 4.7L V-8 engines.ODI's analysis ofconsumer complaints, field reports and other data related to field experience with engine stalling in MY 2006 through 2007 Jeep Commander vehicles equipped with 3.7L, 4.7L and 5.7L engines identified an elevated rate of stalling incidents in the MY 2006 vehicles equipped with 4.7L engines that were manufactured before the calibration change.ODI interviewed over 70 consumers who reported stalling incidents in early production MY 2006 4.7L vehicles.information gathered from those interviews indicated that the stalling incidents were occurring at various speeds, often occurred during turns and typically occurred more than once.the interviews did not identify any concerns with restartability. Although the early MY 2006 production vehicles with 4.7L engines make up only about 15 percent of all MY 2006 through 2007 Jeep Commanders built by Chrysler, they were responsible for 465 of the 854 reported stalling incidents (54%), 6 of the 12 crash incidents (50%) and the only injury claim.the stalling rate for the recalled vehicles is 1.90 percent, almost 7 times greater than the rate in the remaining population (0.28 percent).Chrysler's recall covers the vehicles with the elevated stalling rate.the remaining vehicles have relatively low rates of stalling and do not exhibit any signs of aggravating factors such as problems with restart. ODI also analyzed complaints alleging concerns with loss of lighting coincident to stalling incidents.this analysis identified seven stalling incidents where loss of exterior lighting was alleged.no specific cause was identified in these incidents and there was no discernible pattern regarding engine, vehicle production options, build range or failure trend. This investigation is closed with Chrysler's recall.
- Documents (10)
- OCC 3/13/2008 LETTER TO CHRYSLER GRANT CONFIDENTIAL TREATMENT TO CHRYLSER 1/4/2008 LETTER TO OCC
- MEMO TO TIS, ONE CD, DIAMLERCHYSLER 1/4/2008 ENCLOSURE 1, 2, 3, 4, 7, 8, 11, 12, 13 & 15
- CHRYLSER 1/4/2008 LETTER TO OCC REQUEST FOR CONFIDENTIAL TREATMENT
- IR TO MFR * 11/06/07 * p
- TEST/SURVEY REQUEST * 03/28/08 * p
- OPENING RESUME APPROVED * 04/27/07 * p
- MEMO 4/4/2008 TO TIS, ONE CD, CHRYSLER 4/4/2008 SUPPLEMENTAL RESPONSE
- CLOSING RESUME APPROVED * 05/07/08 * p
- MEMO 4/29/2008 FROM CHRYSLER TO ODI
- CHRYSLER 4/4/2008 LETTER TO ODI
Click a tab for more information.