Technical Service Bulletins (TSBs) for the 2022 Santa Cruz are official communications between Hyundai & their dealerships that describe processes for troubleshooting or fixing certain common problems.
All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
Certain 2022-2023MY Santa Cruz (NXT) vehicles may experience a warning lamp illumination for a diagnostic trouble code P2181 that is related to the Integrated Thermal Management Module (ITM). Read More »
This bulletin provides the diagnostic procedure for the GDI injector(s) in certain 21-23MY Sonata, 21-22MY Santa Fe, certain 22MY Santa Cruz, and certain 21-23MY Tucson equipped with 2. Read More »
If you are servicing an 8-speed vehicle with a a??Check Enginea?? light on and one or more of the DTC listed, follow the service procedure and replace the related solenoid and harness. Read More »
This bulletin provides the diagnostic procedure for the GDI injector(s) in certain 21-23MY Sonata, 21-22MY Santa Fe, certain 22MY Santa Cruz, and certain MY21-23 Tucson equipped with 2. Read More »
This bulletin provides the diagnostic procedure for the GDI injector(s) in certain 21-22MY Sonata, Santa Fe, and certain 22MY Santa Cruz, and Tucson equipped with 2. Read More »
This bulletin provides the procedure to update ECU and TCU of a vehicle experiencing any of the following DTC: P013E - O2 Sensor Delayed Response - Rich to Lean Bank 1 Sensor 2 P0456 - Evaporative ... Read More »
Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement. Read More »
ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM)
If you are servicing an applicable vehicle with a a??Check Enginea?? light on and one or more of the DTC listed below, follow the repair procedure and replace the related input/output speed sensor and harness. Read More »
ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS
Certain vehicles listed below equipped with 2.5T turbo engines may have a misassembled check valve for the PCV (Positive Crankcase Ventilation) system, resulting in engine oil entering the intake and contaminating the air cleaner. Read More »
This bulletin describes the procedure to inspect and if necessary, place a new emissions specification label on top of the existing label. The label is located on the underside hood panel of the vehicle. Read More »
This TSB provides a procedure to diagnose and replace, if necessary, an automatic transmission with Incorrect Ratio DTC (transmission clutch slip in gear above limit) listed on Page 2. Read More »
This bulletin provides the procedure for updating the automatic transmission TCU and ECU software (Santa Fe ONLY) to improve shift quality, judder with ISG enabled and hesitation when accelerating. Read More »
This bulletin provides information related to a Transmission Control Unit (TCU) software update for certain vehicles equipped with an 8-speed wet dual clutch transmissions (8WDCT) that improves the touch point learning variation. Read More »
This bulletin outlines changes to the service procedure regarding the replacement of 8-speed wet dual clutch transmissions (8WDCT) and associated transmission control unit (TCU). These changes only apply to vehicles equipped with Theta 2. Read More »
If you are servicing an 8-speed vehicle with a a??Check Enginea?? light on and one or more of the DTC listed, follow the service procedure and replace the related solenoid and harness. Read More »
This bulletin provides service procedures to prevent possible moisture intrusion of the HP EOP (High Flow Electric Oil Pump) connector when servicing the 8-speed wet dual clutch transmission (8WDCT). Read More »
This bulletin outlines changes to the service manual regarding the replacement of 8-speed dual clutch transmissions (DCT) and associated transmission control module (TCM). Read More »
This bulletin provides the procedure to update ECU and TCU of a vehicle experiencing any of the following DTC: P013E - O2 Sensor Delayed Response - Rich to Lean Bank 1 Sensor 2 P0456 - Evaporative ... Read More »
If you are servicing an applicable vehicle with a a??Check Enginea?? light on and one or more of the DTC listed on Page 2, follow the repair procedure and perform the diagnosis. Read More »
If you are servicing an applicable vehicle with a a??Check Enginea?? light on and one or more of the DTC listed below, follow the repair procedure and replace the related input/output speed sensor and harness. Read More »
If you are servicing an applicable vehicle with a a??Check Enginea?? light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and valve body harness. Read More »
This bulletin outlines the repair procedure for some 22MY and 23MY Tucson and Santa Cruz vehicles that exhibit symptoms of no audio or intermittent sound from the vehicle's speakers. Read More »
This bulletin outlines the process for replacing the external amplifier on certain 22MY and 23MY Tucson and Santa Cruz vehicles equipped with an external amplifier. Read More »
This bulletin describes the procedure to update wireless CarPlay to alleviate frequent disconnection of wireless CarPlay caused by other wireless noise from unknown sources which could make wireless communication unstable between D-Audio ... Read More »
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. Read More »
This bulletin provides instructions to inspect and repair certain Santa Cruz (NXT) vehicles experiencing a condition where the tonneau cover does not retract properly and/or a V-Gap is present when closed. Read More »
This bulletin provides repair instructions for certain Santa Cruz (NXT) vehicles exhibiting difficulty with the tonneau cover not opening (does not unlatch when unlocked and the handle is in the open position) or not closing (does not ... Read More »
This bulletin provides repair information for a non-glossy front door pull handle that exhibits paint peeling on certain 2022 a?? 2023MY Tucson (NX4A) and Santa Cruz (NXT) vehicles. Read More »
Certain 2022MY Tucson (NX4A) and Santa Cruz (NXT) vehicles may exhibit delamination on the main crash pad assembly. This bulletin outlines the procedures to inspect and replace the assembly if necessary. Read More »
The tonneau cover latch and pull strap may not be fully seated and could detach when pulled. The TSB# 21-01-062H described the procedure to inspect, and if necessary, replace the latch and pull strap assembly. Read More »
The screws on the tonneau cover canister may become rusted. This bulletin describes the procedure to inspect, and if necessary, replace the tonneau cover canister screws. Read More »
Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. Read More »
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail ... Read More »
This bulletin describes the procedure to update wireless CarPlay to alleviate frequent disconnection of wireless CarPlay caused by other wireless noise from unknown sources which could make wireless communication unstable between D-Audio ... Read More »
This bulletin describes the procedure to inspect and if necessary, place a new emissions specification label on top of the existing label. The label is located on the underside hood panel of the vehicle. Read More »