Technical Service Bulletins (TSBs) for the 2015 Genesis are official communications between Hyundai & their dealerships that describe processes for troubleshooting or fixing certain common problems.
All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years. Read More »
This bulletin provides service information for the shock absorber extension wiring harness, applicable to vehicles equipped with Electronic Control Suspension (ECS). These harnesses are now available separately from the ECS shock assembly. Read More »
This bulletin describes the procedure to replace the brake tube assemblies for certain 2015MY Hyundai Genesis (DH) vehicles located in the salt belt states. Salt belt states are listed below in Applicable Vehicles. Read More »
This bulletin describes the procedure to inspect and if necessary replace the brake tube assemblies for certain 2015MY Hyundai Genesis (DH) vehicles located in the non-salt belt states. Read More »
This bulletin provides information regarding the changes in the timing chain and the crankshaft sprockets on certain Azera (HG), Santa Fe/Santa Fe XL (NC), Genesis (BH/DH), Genesis Coupe (BK), and G90 (HI) vehicles equipped with Lambda 3. Read More »
When servicing a Genesis (DH) with a ?Check Engine light? and any of the following DTCs listed below are found stored, replace the throttle body. Read More »
When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the related solenoid and E-module. Read More »
If you are servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the E-module. Read More »
Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement. Read More »
This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required ... Read More »
Certain 2015-2016MY Hyundai Genesis (DH) vehicles may exceed evaporative emissions standards due to Onboard Refueling Vapor Recovery (ORVR) system. Read More »
Certain 15-16MY Hyundai Genesis (DH) vehicles may exceed evaporative emissions standards due to Onboard Refueling Vapor Recovery (ORVR) system. Read More »
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)
HYUNDAI: SOME VEHICLES WILL EXPERIENCE DIAGNOSTIC TROUBLE CODE REGARDING CRANKSHAFT POSITION SENSOR, ENGINE ROUGH IDLE, MALFUNCTION INDICATOR LAMPS BLINKS OFF AND ON AND PROCEDURE IS PROVIDED. MODEL 2015 GENESIS. Read More »
Certain 2015-2016MY Hyundai Genesis (DH) vehicles may exceed evaporative emissions standards due to Onboard Refueling Vapor Recovery (ORVR) system. Read More »
Certain 15-16MY Hyundai Genesis (DH) vehicles may exceed evaporative emissions standards due to Onboard Refueling Vapor Recovery (ORVR) system. Read More »
This TSB provides consolidated diagnosis and repair information, currently in the shop manual, to address DTC U0109 / U010900 related to a communication error with the Fuel Pump Control Module (FPCM). Read More »
This bulletin outlines the basic components of the BG Fuel Test Kit and the procedure to test the quality of the fuel during vehicle diagnosis. Read More »
This TSB provides a procedure to diagnose and replace, if necessary, an automatic transmission with Incorrect Ratio DTC (transmission clutch slip in gear above limit) listed on Page 2. Read More »
This bulletin describes the procedure to replace the 35R and 4&OD solenoids for a shift flare and/or harsh shift during the 2~3, 3~4 or 4~5 upshift. Read More »
The bulletin describes the procedure to measure and set propeller shaft angles to optimize driveline vibration performance on certain 2015-2016MY 3.8L AWD G80 (DH) vehicles. Read More »
The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions: Read More »
If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. Read More »
This bulletin provides information regarding the changes in the timing chain and the crankshaft sprockets on certain Azera (HG), Santa Fe/Santa Fe XL (NC), Genesis (BH/DH), Genesis Coupe (BK), and G90 (HI) vehicles equipped with Lambda 3. Read More »
This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. Read More »
This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Read More »
When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the related solenoid and E-module. Read More »
This bulletin provides the procedure to replace the automatic transmission fluid (ATF) warmer connector on some vehicles which may exhibit a coolant leak between the ATF connector and engine side heater pipe. Read More »
This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. Read More »
When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the related solenoid and E-module. Read More »
"UPDATE THE WARRANTY INFORMATION. DESCRIPTION: DO NOT REPLACE THE TRANSMISSION FOR THE DTC LISTED BELOW. INSTEAD, FOLLOW THE REPAIR PROCEDURE AND REPLACE THE E-MODULE." Read More »
THIS BULLETIN PROVIDES A PROCEDURE TO TRANSFER PRESSURE DATA TO THE TCM USING GDS MOBILE. THIS PROCEDURE IS NECESSARY TO REDUCE THE TCM LEARNING TIME AND IMPROVE THE SHIFT QUALITY. Read More »
"THE PCM OR TCM CONTAINS LOGIC TO ADJUST SOLENOID DUTY AND LINE PRESSURE AS NEEDED TO COMPENSATE FOR NORMAL CLUTCH WEAR OVER THE LIFE OF THE TRANSAXLE. Read More »
POWER TRAIN:AUTOMATIC TRANSMISSION:COOLING UNIT AND LINES
"THE PCM OR TCM CONTAINS LOGIC TO ADJUST SOLENOID DUTY AND LINE PRESSURE AS NEEDED TO COMPENSATE FOR NORMAL CLUTCH WEAR OVER THE LIFE OF THE TRANSAXLE. Read More »
This bulletin provides the warranty extension, service procedure to replace the left side of the multifunction switch assembly, and perform a software update. Read More »
This bulletin provides the warranty extension and service procedure to replace the multifunction switch assembly. Certain vehicles may exhibit intermittent headlight flickering while driving with the light switch on AUTO light mode. Read More »
Hyundai is extending the multifunction switch assembly warranty to 15 years with unlimited miles from the date of original retail delivery or date of first use (whichever occurs first). Read More »
On certain 2015-2016 Genesis (DH) vehicles, the trunk harness may be damaged due to tension against the trunk lid arm. This bulletin provides the procedure to inspect, repair when necessary, and reroute the wire harness. Read More »
This bulletin provides information on identifying dealer stock vehicles with either: a?? A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. a?? A 30 Day alert - vehicle has not started and reported an SOC in 30 days. Read More »
This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. Read More »
This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Read More »
Some Hyundai Genesis vehicles may experience a haptic steering warning light with DTC Code B247100 ? Vibration Motor Fault code set. This bulletin provides service information and the procedure to replace the haptic controller. Read More »
This bulletin describes the procedure to repair a condition with the radio changing bands/switching modes between AM>FM>SXM (intermittently) on its own. Read More »
This bulletin provides information for new software to update the Navigation and Display Audio system to include the Apple CarPlay and Android Auto feature. Read More »
THIS BULLETIN PROVIDES INFORMATION FOR NEW SOFTWARE TO UPDATE THE NAVIGATION AND DISPLAY AUDIO SYSTEM TO INCLUDE THE APPLE CARPLAY AND ANDROID AUTO FEATURE. Read More »
This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. Read More »
Hyundai is extending the multifunction switch assembly warranty to 15 years with unlimited miles from the date of original retail delivery or date of first use (whichever occurs first). Read More »
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. Read More »
This bulletin provides information on the serviceable parts for the outside mirror assembly. When diagnosing and repairing the outside mirror, do not replace the entire assembly. Read More »
This bulletin provides instruction detailing the repair of a panoramic sunroof exhibiting the following condition(s): ? Creaking Noise ? Inoperative Slide Read More »
The warranty coverage for the panoramic sunroof moving glass has been extended to 10 years or 120,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent ... Read More »
This bulletin provides information on the serviceable parts for the outside mirror assembly. When diagnosing and repairing the outside mirror, do not replace the entire assembly. Read More »
The warranty coverage for the panoramic sunroof moving glass has been extended to 10 years or 120,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent ... Read More »
Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. Read More »
On certain 2015-2016 Genesis (DH) vehicles, the trunk harness may be damaged due to tension against the trunk lid arm. This bulletin provides the procedure to inspect, repair when necessary, and reroute the wire harness. Read More »
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail ... Read More »
This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance. Read More »
2015MY GENESIS SEDAN (DH) TIRE REPLACEMENT (RECALL 138) Description: On certain 2015MY Genesis sedan (DH) vehicles the original equipment tires (Hankook Ventus S1 Noble 2) may exhibit uneven tread wear; and/or cracks along the ... Read More »
ON CERTAIN 2015MY GENESIS SEDAN (DH) VEHICLES THE ORIGINAL EQUIPMENT TIRES (HANKOOK VENTUS S1 NOBLE 2) MAY EXHIBIT UNEVEN TREAD WEAR; AND/OR CRACKS ALONG THE SIDEWALL(S). Read More »
This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance. Read More »
Some vehicles may experience seat noise and/or possible wobble movement from the seat bottom when the vehicle is turning. This bulletin describes the procedure to install an e-ring clip to the tilt pipe housing on the front seat. Read More »
Certain 2015-2016 Genesis (DH) vehicles may have a condition where the seat backboard comes loose. This bulletin describes the procedure to replace the seat backboard clip. Read More »
Certain 2015-2016 Genesis (DH) vehicles may have a condition where the seat backboard comes loose. This bulletin describes the procedure to replace the seat backboard clip. Read More »
This bulletin describes the procedure to replace the front seat cushion tilt pipe housing. If wobble, and/or noise occurs from the front seat track assembly, it is recommended to replace the front seat cushion tilt pipe housings with new ... Read More »
Certain 2015-2016 Genesis (DH) vehicles may have a condition where the seat backboard comes loose. This bulletin describes the procedure to replace the seat backboard clip. Read More »
This bulletin provides service information for the shock absorber extension wiring harness, applicable to vehicles equipped with Electronic Control Suspension (ECS). These harnesses are now available separately from the ECS shock assembly. Read More »
The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. Read More »
The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. Read More »
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) sets a threshold for correcting load capacity information indicated on tire placards when the vehicle weight has been increased before retail sale. Read More »
This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required ... Read More »
This bulletin describes the procedure to replace the brake tube assemblies for certain 2015MY Hyundai Genesis (DH) vehicles located in the salt belt states. Salt belt states are listed below in Applicable Vehicles. Read More »
This bulletin describes the procedure to inspect and if necessary replace the brake tube assemblies for certain 2015MY Hyundai Genesis (DH) vehicles located in the non-salt belt states. Read More »
The bulletin describes the procedure to measure and set propeller shaft angles to optimize driveline vibration performance on certain 2015-2016MY 3.8L AWD G80 (DH) vehicles. Read More »
This bulletin provides the warranty extension, service procedure to replace the left side of the multifunction switch assembly, and perform a software update. Read More »
This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. Read More »
This bulletin provides the warranty extension and service procedure to replace the multifunction switch assembly. Certain vehicles may exhibit intermittent headlight flickering while driving with the light switch on AUTO light mode. Read More »
This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products. Read More »
This bulletin provides information on identifying dealer stock vehicles with either: a?? A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. a?? A 30 Day alert - vehicle has not started and reported an SOC in 30 days. Read More »
If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. Read More »
This bulletin contains information regarding the clock display on certain Navigation (AVN 4.0) head units. This procedure is specifically for the clock date and time not displaying which started appearing around August 17, 2019. Read More »
When servicing a Genesis (DH) with a ?Check Engine light? and any of the following DTCs listed below are found stored, replace the throttle body. Read More »
This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality. Read More »
This bulletin describes the proper steps to identify and correct a symptom with a "Subscription Updated" or "Loading" pop-up message shown (intermittently) after every Head Unit boot up. Read More »
This bulletin describes the procedure to repair a condition with the radio changing bands/switching modes between AM>FM>SXM (intermittently) on its own. Read More »
HYUNDAI: PROCEDURE IS PROVIDED FOR PASSENGER'S SEAT CONNECTOR FOR INSTALLATION OF DUMMY HOUSING TO SEAL CONNECTION HOUSING DUE TO WATER INTRUDING IN INTERIOR CABIN. MODEL 2015 GENESIS. *PE Read More »
This bulletin contains information regarding the clock display on certain Navigation (AVN 4.0) head units. This procedure is specifically for the clock date and time not displaying which started appearing around August 17, 2019. Read More »
This bulletin provides information for new software to update the Navigation and Display Audio system to include the Apple CarPlay and Android Auto feature. Read More »
This bulletin describes the procedure to determine if the vehicle's navigation unit needs to be replaced as a result of the inability to set the clock or view it on the top of the screen. Read More »
This bulletin describes the procedure to variant code the Genesis Sedan (DH) navigation system. If the variant coding procedure is not performed after the navigation unit is replaced and vehicle is in the Reverse gear, a black/blank ... Read More »
This bulletin describes the procedure to variant code the Genesis Sedan (DH) navigation system. If the variant coding procedure is not performed after the navigation unit is replaced and vehicle is in the Reverse gear, a black/blank ... Read More »
"THIS BULLETIN DESCRIBES STEPS TO ACTIVATE APPLICABLE VEHICLES WITH NAVIGATION OR DISPLAY AUDIO RADIOS THAT HAVE BEEN DE-ACTIVATED FOR THE FOLLOWING REASONS: ?H A CUSTOMER WHO INITIALLY WAIVES BLUE LINK ENROLLMENT, AND THEN DECIDES TO ... Read More »
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) sets a threshold for correcting load capacity information indicated on tire placards when the vehicle weight has been increased before retail sale. Read More »
The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions: Read More »
This bulletin provides the warranty extension, service procedure to replace the left side of the multifunction switch assembly, and perform a software update. Read More »
This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. Read More »
This bulletin provides the warranty extension and service procedure to replace the multifunction switch assembly. Certain vehicles may exhibit intermittent headlight flickering while driving with the light switch on AUTO light mode. Read More »
The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions: Read More »
Certain 2015-2016 Genesis (DH) vehicles may have a condition where the seat backboard comes loose. This bulletin describes the procedure to replace the seat backboard clip. Read More »
This bulletin contains information regarding the clock display on certain Navigation (AVN 4.0) head units. This procedure is specifically for the clock date and time not displaying which started appearing around August 17, 2019. Read More »
This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Read More »
This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Read More »
When servicing a Genesis (DH) with a ?Check Engine light? and any of the following DTCs listed below are found stored, replace the throttle body. Read More »
