TSB Document:

• MC-10114468-9999.pdf

Affected Component: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

Summary

This Preliminary Information communication provides information to the technician about vehicles that may have Service Engine Soon Malfunction Indicator Lamp on and a reduced engine power after cold starting their engine when the ambient temperature is approximately ? 10 Fahrenheit (-23 Celsius). Technician may find Diagnostic Trouble Codes P1516, P2101, P2119, and/or P2176. Technician may find some vehicles may have an oil leak from the front or rear crank seal, cam cover gasket, or dipstick tube as well. Technician will need to determine if the concern is the result of a frozen positive crankcase ventilation system. To determine if the concern is the result of a frozen positive crankcase ventilation system on inline 4 and 5 engines disconnect the positive crankcase ventilation vacuum pipe that is attached to the rear of cam cover and inspect the inside of it for ice, moisture, and/or sludge. Also inspect the engine oil dipstick and engine oil fill cap for moisture, sludge, and/or ice. To determine if the concern is the result of a frozen positive crankcase ventilation system on inline 6 carefully disconnect the top or the bottom of the rubber positive crankcase ventilation vacuum hose that is between the #3 and #4 intake runners and inspect for ice. Also inspect the engine oil dipstick and engine oil fill cap for moisture, sludge, and/or ice. If the positive crankcase ventilation is not determined to be frozen follow Service Information diagnosis and any other bulletins or Preliminary Information that apply to the vehicle you are working on. If there is moisture, ice, and/or sludge in/on the oil fill cap, oil dipstick, and/or positive crankcase ventilation vacuum tube, this is most likely the result of a frozen positive crankcase ventilation system and the suggestions in the Preliminary Information should be followed. Technician should clean any ice, sludge, water out of the positive crankcase ventilation pipes, hoses and throttle body, and allow them to dry. Te

Click a tab for more information.