- October 27: Honda Fuel Pump Recall Issued Over Fuel Leaks recalls | 7 days ago
- October 13: Honda Infotainment Lawsuit Says Speakers Make Popping Noise news | 21 days ago
- October 11: Honda Sticky Steering Lawsuit Argued in Federal Court news | 23 days ago
- October 10: Honda Sticky Steering Recall Involves 1.9 Million Vehicles recalls | 24 days ago
- September 30: ZF-TRW Airbag Failure Investigation Closed investigations | 34 days ago
Honda Defect Investigation RQ24011: Rear-View Camera Failure
2018 Honda Ridgeline
Rear-View Camera Failure
Back Over Prevention
- Summary
- On November 23, 2022, American Honda Motor Co. (Honda), submitted recall 22V-867 to the Office of Defects Investigation (ODI), addressing concerns of a loss of the Rear View Camera (RVC) function in model year (MY) 2017-2019 Honda Ridgeline vehicles. Recall 22V-867 states that the RVC wire harness was manufactured with a protective corrugated tubing which was insufficient to protect against bending wear and zip ties which were insufficiently tightened and would not keep the protective tubing in place. The consequence is that the RVC wire harness may fatigue and break after repeated opening and closing of the tailgate. This ultimately results in the failure of the RVC image to display due to a lack of connectivity. Honda-??s remedy identified in the recall filing was a replacement harness with longer protective corrugated tubing and sufficiently tightened zip ties. On May 3, 2024, Honda submitted recall 24V-321 to ODI, addressing concerns of a loss of the RVC function in MY 2020-2024 Honda Ridgeline vehicles. Recall 24V-321 states that the RVC wire harness was manufactured with a material which was susceptible to breakage upon repeated opening and closing of the tailgate, which ultimately leads to a complete loss of RVC function. Honda-??s remedy identified in the recall filing was a replacement harness manufactured by a new supplier with improved material properties to withstand wear from bending. At this time, ODI has not received any allegations of RVC failure post recall 22V-867 remedy, as the nature of the failure addressed by this recall requires time in service that the remedy parts have not yet seen. Since the remedy parts for this recall and the parts being recalled under 24V-321 use the same supplier and materials for critical components in the RVC wire harness, ODI is opening this Recall Query to assess the long-term suitability of the remedy for recall 22V-867.
Click a tab for more information.