SOME 2017 FUSION/MKZ VEHICLES BUILT ON OR BEFORE 18-AUG-2016 MAY EXHIBIT AN AIR BAG LAMP. CONNECT THE IDS AND CHECK THE RCM FOR DTCS. IF DTC U3000, U2100, U2101, U2300, U0455, U0452, B0080, B141B, B141C, B0054, B140C, B140D, B0057, B140E, AND/OR B140F ARE STORED IN THE RCM, REPROGRAM THE RCM TO THE LATEST LEVEL USING IDS RELEASE 102.03 OR HIGHER. AFTER REPROGRAMING, PERFORM AN AS-BUILT CONFIGURATION OF THE RCM. SELECT NO WHEN ASKED IF YOU WERE SENT HERE BY AN ARTICLE. MAKE SURE YOU ARE CONNECTED TO THE INTERNET WHEN ENTERING MODULE PROGRAMMING TO OBTAIN THE LATEST UPDATES. USE THE APPLICABLE LABOR OPERATION IN SECTION 10 OF THE SERVICE LABOR TIME STANDARDS MANUAL AND CAUSAL PART 14B321 WHEN CLAIMING THIS REPAIR. CALIBRATION FILES MAY ALSO BE OBTAINED AT WWW.MOTORCRAFTSERVICE.COM
