- October 27: 2019 Ford Flex Backup Camera Problems Investigated investigations | 7 days ago
- October 26: California Ford Emissions Warranty Lawsuit Dismissed news | 8 days ago
- October 25: Flicking Parking Lights Cause Ford F-150 Recall recalls | 9 days ago
- October 5: Ford Truck Roof Collapse Lawsuit: Partial Dismissal news | 29 days ago
- October 5: Ford Edge Brake Hose Recall May Be Needed investigations | 29 days ago
Ford TSB #SSM 47849
2015 Ford Fusion
TSB Document:
Affected Component: ENGINE AND ENGINE COOLING
- Summary
- Some 2014-2019 Fusion and 2017-2019 Escape equipped with 1.5L Ecoboost engine may exhibit coolant consumption and white smoke concern. Follow the Cooling System Pressure Test procedure in WSM, Section 303-03, pressurize the cooling system to 138kPa(20 psi0 and hold for 5 hours. If cooling system pressure drops 27.57kPa(4psi) after 5 hours and internal engine coolant loss is confirmed, further investigation of the engine block surface to head gasket interface is required. Carefully inspect engine block cylinders and cylinder bore bridges for erosion, pitting, and flatness. If defects with the cylinder block surface are identified, follow WSM, Section 303-01A procedures for repairs. Complete cost cap as needed to determine the most cost effective repair. Ford has found that all returned cylinder heads pass inspection and may have been reused.
Click a tab for more information.