- November 5: $1.7 Billion Ford Truck Roof Collapse Verdict: Ford Gets New Trial news | 0 days ago
- November 4: Ford F-250, F-350 and F-450 Recalled Over Camera Issues recalls | 1 days ago
- November 4: Ford Mustangs Recalled For Instrument Panel Failures recalls | 1 days ago
- October 27: 2019 Ford Flex Backup Camera Problems Investigated investigations | 9 days ago
- October 26: California Ford Emissions Warranty Lawsuit Dismissed news | 10 days ago
Ford TSB #SSM 46069
2015 Ford Flex
TSB Document:
Affected Component: POWER TRAIN:AUTOMATIC TRANSMISSION
- Summary
- Some 2015-2016 vehicles equipped with 6F50/6F55 transmission Built On 11/2/2015 And Through 2/1/2016 may exhibit no reverse, 3rd and 5th gear and/or DTCs P0715, P0717, P0756 and/or P2701. This may be caused by the direct clutch snap ring out of position and/or damage to the direct clutch hub. The cause of the failure is the Tone Wheel surface putting uneven load on the snap ring. To repair this condition the Tone Wheel (7F283) must be replaced,(also referred to as Direct Clutch Cylinder/Tone wheel) in addition to the Tone Wheel, replace Direct Clutch Hub (7G384), Direct Clutch Return Spring (7F235), Direct Clutch Snap Ring (7C122), TSS Sensor (7M101), Seal Kit (7153) and filter in the kit. Disassemble, clean the transmission and main control to remove metal particles. Refer to WSM, Section 307-01. Use causal part 7F283 and applicable Labor ops from SLTS section 7.
Click a tab for more information.