- October 5: Ford Truck Roof Collapse Lawsuit: Partial Dismissal news | 1 days ago
- October 5: Ford Edge Brake Hose Recall May Be Needed investigations | 1 days ago
- September 29: Motion to Dismiss Ford Super Duty Roof Collapse Class Action Lawsuit news | 7 days ago
- September 25: Ford Recalls 2024 Explorer Hybrids Over Fire Risk recalls | 11 days ago
- September 22: Ford Maverick Radio Problems Kill the Backup Camera Images recalls | 14 days ago
Ford TSB #SSM 51122
2019 Ford F-150
TSB Document:
Affected Component: ELECTRICAL SYSTEM:STARTER ASSEMBLY
- Summary
- Some 2017-2022 F-250-F-550, 2015-2020 F-150 and 2018-2022 Expedition vehicles without push button start and passive entry may exhibit a condition where it is difficult to insert the ignition key and/or turn it to the accessory position when removing the ignition lock cylinder per the functional lock cylinder service procedure in Workshop Manual (WSM), Section 501-14. This may be due to debris or contamination in the ignition lock cylinder. If this concern occurs, use a suitable shop vacuum to dislodge or remove debris or contamination by placing the vacuum hose over the lock cylinder, without the key installed, for 30 seconds. Insert the ignition key and reattempt turning it to the accessory position for lock cylinder removal. If the key will not turn to the accessory position, continue with the non-functional lock cylinder removal procedure.
Click a tab for more information.