- October 27: 2019 Ford Flex Backup Camera Problems Investigated investigations | 7 days ago
- October 26: California Ford Emissions Warranty Lawsuit Dismissed news | 8 days ago
- October 25: Flicking Parking Lights Cause Ford F-150 Recall recalls | 9 days ago
- October 5: Ford Truck Roof Collapse Lawsuit: Partial Dismissal news | 29 days ago
- October 5: Ford Edge Brake Hose Recall May Be Needed investigations | 29 days ago
Ford TSB #SSM 50089
2017 Ford F-150
TSB Document:
Affected Component: FUEL SYSTEM, GASOLINE
- Summary
- Some 2017-2021 Ford and Lincoln vehicles equipped with 3.3L, 3.5L EcoBoost, or 5.0L engines may exhibit stalling, lack of power, low fuel rail pressure and/or DTCs P0087 or P008A after a repair was made that required the removal of the fuel line that connects the high-pressure fuel pump to the port injection rail, such as injector replacements or base engine repairs. This line must be installed in the correct orientation as it has an internal one-way check valve. To determine if the fuel line has been installed improperly, look at the position of the Oetiker clamp (stainless band clamped around the black fuel line). The clamp holds the one-way check valve in place and should be located closest to the end connected to the port injection rail. If the clamp is not closest to the port injection rail, remove and reinstall the line in the proper orientation.
Click a tab for more information.