- October 27: 2019 Ford Flex Backup Camera Problems Investigated investigations | 7 days ago
- October 26: California Ford Emissions Warranty Lawsuit Dismissed news | 8 days ago
- October 25: Flicking Parking Lights Cause Ford F-150 Recall recalls | 9 days ago
- October 5: Ford Truck Roof Collapse Lawsuit: Partial Dismissal news | 29 days ago
- October 5: Ford Edge Brake Hose Recall May Be Needed investigations | 29 days ago
Ford TSB #SSM 48053
2017 Ford Explorer
TSB Document:
Affected Component: ELECTRICAL SYSTEM
- Summary
- Some 2016-2019 Ford and Lincoln vehicles equipped with SYNC 3 not at the latest software level may exhibit Various Performance Related concerns such as Display Operation, Navigation, Voice Recognition, Phone Pairing, Applink, Travel Link, Slow System Response, etc. Check for SYNC software update under the OASIS Tab SYNC selection. If an update is available refer to WSM,Section 415-00 and update the APIM software. After Installation, complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual. Section
Click a tab for more information.