- August 23: Ford Bronco Sport and Maverick 12V Battery Investigation Closed investigations | 1 days ago
- August 22: Ford Maverick Trucks Recalled Over Low Battery Conditions recalls | 2 days ago
- August 18: Ford Truck Roof Lawsuit Filed After F-350 Rollover Crash news | 6 days ago
- August 18: Ford Backup Camera Recalls Allegedly Failed, Says Lawsuit news | 6 days ago
- August 17: Ford Ranger and Lincoln Nautilus Recalled Over Window Reversal Feature recalls | 7 days ago
Ford TSB #SSM 46702
2017 Ford Explorer
TSB Document:
Affected Component: ELECTRICAL SYSTEM:SOFTWARE
- Summary
- Some 2016-2017 Ford/Lincoln vehicles SYNC 3 may exhibit an intermittent blank screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. During the update process the SYNC status bar shows Updating System Software for approximately 30 minutes. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or blank screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
Click a tab for more information.