- September 29: Motion to Dismiss Ford Super Duty Roof Collapse Class Action Lawsuit news | 3 days ago
- September 25: Ford Recalls 2024 Explorer Hybrids Over Fire Risk recalls | 7 days ago
- September 22: Ford Maverick Radio Problems Kill the Backup Camera Images recalls | 10 days ago
- September 16: Ford Mustangs Recalled Over Fractured Rear Suspension Knuckles recalls | 16 days ago
- September 7: Ford Issues Transit Steering Column Intermediate Shaft Recall recalls | 25 days ago
Ford TSB #SSM 47339
2018 Ford Edge
TSB Document:
Affected Component: EQUIPMENT
- Summary
- Some 2017-2018 Edge vehicles with 3.5L engines and MKX vehicles with 3.7L engines may exhibit an illuminated MIL with DTC P013C in the powertrain control module (PCM). This may be due to an exhaust system leak. Exhaust leak inspection should be conducted before performing Powertrain Control/Emissions Diagnostics PC/ED Manual diagnostic routines. Inspect for carbon soot/moisture witness marks at all exhaust connections and catalyst monitor sensor (CMS) threads. Refer to Workshop Manual (WSM), Section 303-14C. Inspect CMS crush washer to confirm sensor is fully seated in the exhaust pipe. Apply soapy water to exhaust connections including CMS threads, while exhaust flow is restricted at the tailpipe and exhaust system is pressurized at 5 PSI (do not exceed 5 PSI), will increase ability to identify and confirm leaks.
Click a tab for more information.