- September 29: Motion to Dismiss Ford Super Duty Roof Collapse Class Action Lawsuit news | 3 days ago
- September 25: Ford Recalls 2024 Explorer Hybrids Over Fire Risk recalls | 7 days ago
- September 22: Ford Maverick Radio Problems Kill the Backup Camera Images recalls | 10 days ago
- September 16: Ford Mustangs Recalled Over Fractured Rear Suspension Knuckles recalls | 16 days ago
- September 7: Ford Issues Transit Steering Column Intermediate Shaft Recall recalls | 25 days ago
Ford TSB #SSM 47265
2016 Ford Edge
TSB Document:
Affected Component: ENGINE AND ENGINE COOLING
- Summary
- Some Ford and Lincoln vehicles equipped with a 2.7L or 3.0L EcoBoost engines may exhibit an oil leak from the engine oil pan RTV seal. Replace the oil pan by performing the published Workshop Manual (WSM) service procedures. After removing the oil pan, it is suggested to allow the crankcase to drain overnight to minimize the chance of residual oil contaminating the crankcase sealing rail. Remove all traces of old RTV, clean the engine sealing surface with only Motorcraftù Metal Brake Parts Cleaner then wipe with Motorcraftù Metal Surface Prep Wipes, and allow to air dry as directed in WSM, Section 303-00, RTV Sealing Surface Cleaning and Preparation. If possible, after the new oil pan is installed, allow the new RTV sealant to cure for 4 hours before refilling the engine with oil. Ford is investigating this concern. Monitor OASIS for future updates.
Click a tab for more information.