- October 27: 2019 Ford Flex Backup Camera Problems Investigated investigations | 7 days ago
- October 26: California Ford Emissions Warranty Lawsuit Dismissed news | 8 days ago
- October 25: Flicking Parking Lights Cause Ford F-150 Recall recalls | 9 days ago
- October 5: Ford Truck Roof Collapse Lawsuit: Partial Dismissal news | 29 days ago
- October 5: Ford Edge Brake Hose Recall May Be Needed investigations | 29 days ago
Ford TSB #SSM 46702
2017 Ford C-Max
TSB Document:
Affected Component: ELECTRICAL SYSTEM:SOFTWARE
- Summary
- Some 2016-2017 Ford/Lincoln vehicles SYNC 3 may exhibit an intermittent blank screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. During the update process the SYNC status bar shows Updating System Software for approximately 30 minutes. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or blank screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
Click a tab for more information.