- November 18: Ford Expedition Seat Belt Pretensioner Recall Investigated investigations | 2 days ago
- November 18: Ford Battery Failures Investigated in Mavericks, Bronco Sports investigations | 2 days ago
- November 17: Ford Backup Camera Problems Cost Automaker $165 Million news | 3 days ago
- November 9: Ford 'Death Wobble' Lawsuit Certified as Class Action news | 11 days ago
- November 7: Ford Mustang Mach-E Lawsuit Over Battery Contactors Dismissed news | 13 days ago
Ford TSB #SSM 52342
2023 Ford Bronco
TSB Document:
Affected Component: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Summary
- Some 2022-2024 Broncos Raptors built on and before 13-Feb-2024 and 2021-2024 Broncos equipped with a 2.3L EcoBoost engine may exhibit an illuminated MIL with ignition system DTC(s) P0352, P0353, P0354, P0355, P0357, P2303, P2306, P2309, P2312, P2318, P2304, P2307, P2310, P2313, P2319, and/or P2322 set in the powertrain control module (PCM). This may be due to incorrect cylinder to DTC mapping within the PCM. This means the DTCs listed may set against the incorrect cylinder. Even though the cylinder to DTC mapping is incorrect in the PCM, the presence of these DTCs means that a real ignition system concern is present that requires diagnosis and repair. Prior to performing a pinpoint test for one of the listed DTCs, it will be necessary to identify the correct cylinder that has the issue. Do this by using the Ford diagnosis and repair system (FDRS) to perform a cylinder power balance test. If the results show two cylinders dropping out, begin diagnosing the ignition system components for the cylinder that is dropping out and not setting an ignition related DTC. Due to the incorrect cylinder to DTC mapping
Click a tab for more information.