2 day after changing my brake & rotors my car starts vibrating really bad and didn' t have much power. I'd put it in nuetral while going down the road and the vibration would stop then at stop light it would vibrate while sitting at light. took it to auto mechanic and they said that my motor & tranny mounts were really really bad, so took to shop $600 dollars later get it out of shop and notice the next day that its still got a vibration not as bad but there is a small vibration and has no power idles high. So i check my spark plug and one of the wires were burnt inside the wire adaptor so i changed wire and park plugs, took for test drive and it didnt vibrate and had power like it used to the next morning getting ready to go to work and it starts vibrating and running like s$it it acts like its only running on 3 cylinders. what else can i check

I had the first experience with the sway bars in Oct 2007. The front end was squeaking and shaking while driving. I had my vehicle in the shop to find the problem. I was told the sway bar linkage and bushings needed to be replaced. They were and two weeks later back in the shop for the same problem. I was told my tires were bad, and the took

the linkage out cleaned lubed and replaced. I also replaced tires not at the dealer due to cost and had the car aligned. While driving with a friend in the car on 1-16-08 i noticed

a bolt hanging from the front end i thought i only had couple of miles to drive back to

work and would go by the dealer after work. The part came off while driving. I took directly to the dealer after work with the part. I was called that evening to inform me it was the swaybar linkage that had broke basically in half. I am thankful i wasn't on the highway on the way home and my child was not in the vehicle. In my opinion this could have caused major issues.