- September 30: ZF-TRW Airbag Failure Investigation Closed investigations | 34 days ago
- September 5: HEMI Tick Lawsuit Includes 5.7-liter and 6.4-liter Engines news | 59 days ago
- August 11: Dodge Challenger Seatback Recall Issued to Inspect Strikers recalls | 84 days ago
- August 9: Dodge Chargers Recalled Because Seatbacks Don't Lock recalls | 86 days ago
Dodge TSB #68332810
2002 Dodge Grand Caravan
TSB Document:
Affected Component: ENGINE AND ENGINE COOLING
- Summary
- Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar® Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 N·m [21 ft. lbs.].
Click a tab for more information.