CarComplaints.com Notes: When the 3rd-generation Durango was introduced in 2011 owners almost immediately started having a wide range of issues -- from water pump failure to stalling engines. Turns out the TIPM is to blame and those problems carried into the 2012 model year.
TIPM (Totally Integrated Power Modules) is responsible for controlling and distributing power to all the vehicle’s electrical functions. So when the TIPM starts acting up, so do all sorts of problems in the vehicle.
The problems have been so bad -- and replacement parts became so hard to find -- that a class-action lawsuit was filed against Chrysler focusing on the 2011-2012 Durango. The lawsuit accuses the automaker of ignorning the problem until it spiraled out of control.
Most times when I go to start the truck it will not start. If it does start it dies immediately. When I try to start it again, the starter seems to get stuck, so I turn the key off and have to try it again. Eventually it will start and run normal. Just this morning, I went to move the vehicle, and it had no power. Once I hooked up the jumper cables I could hear a humming noise, which I assume would be the fuel pump, as I have read many complaints online about it not turning off due to the TIPM. After I started it and let it run for a while I shut it off and could still here the fuel pump. I should not have to pull the fuse so that my battery will not die due to a defective part. I just got this truck a little over 2 months ago and have had the starting problem since I've got it. Now I got this fuel pump issue. I should not have to pay for something that Chrysler is aware of and, at this point, has chose not to do anything about.
A D V E R T I S E M E N T S
Most times when I go to start the truck it will not start. If it does start it dies immediately. When I try to start it again, the starter seems to get stuck, so I turn the key off and have to try it again. Eventually it will start and run normal. Just this morning, I went to move the vehicle, and it had no power. Once I hooked up the jumper cables I could hear a humming noise, which I assume would be the fuel pump, as I have read many complaints online about it not turning off due to the TIPM. After I started it and let it run for a while I shut it off and could still here the fuel pump. I should not have to pull the fuse so that my battery will not die due to a defective part. I just got this truck a little over 2 months ago and have had the starting problem since I've got it. Now I got this fuel pump issue. I should not have to pay for something that Chrysler is aware of and, at this point, has chose not to do anything about.
- Joshua T., San Antonio, TX, US