Occupant Restraint Controller (ORC)
For PF, KL or UF Vehicles ONLY:
Prior to replacing ORC part numbers, please contact FCA engineering if ANY of the
following Diagnostic trouble codes are Stored or Active in the ORC module:
DTC: B223D-00 - OCM DTC Present
DTC: B0050-13 - Driver Seatbelt Sensor-Circuit Open
DTC: B0052-13 - Passenger Seatbelt Sensor-Circuit Open
DTC: B00B5-13 - Driver Seat Track Position Restraints Sensor-Circuit Open
DTC: B00C5-13 - Passenger Seat Track Position Restraints Sensor-Circuit Open
DTC: B0028-13 - Right Side Seat Deployment Squib 1-Circuit Open
DTC: B0020-13 - Left Side Seat Deployment Squib 1-Circuit Open
Execute DealerCONNECT / TechCONNECT Diagnostic Procedures to assess
potential defects to devices connected to the ORC Module depending on the active
or stored Diagnostic Trouble Code. If no defects are detected, verify wiring
connectivity between the ORC Module and the component associated with the
Diagnostic Trouble Code. Investigate connector pins and wire harness terminals for
bent,corroded,or spread conditions. If no response within 15 minutes, proceed with
repair.
FCA Engineering Contacts:
Jay Nagle (ORC Module, Driver/passenger seat track position sensor, OCM for PF,
KL or UF Vehicles ONLY) @ cell (248) 576-5657
