- November 14: Dodge Durangos and Jeep Grand Cherokees Recalled Over ABS Modules recalls | 1 days ago
- November 12: Chrysler 300 and Dodge Charger Door Panels Warp: Lawsuit news | 3 days ago
- November 8: Dodge Class Action Lawsuit Dismissed news | 7 days ago
- November 7: Dodge Hornet Hybrid and Alfa Romeo Tonale Hybrid Recalled recalls | 8 days ago
- September 30: ZF-TRW Airbag Failure Investigation Closed investigations | 46 days ago
Red Light On Dashboard Lit Continuously
2003 Dodge Caravan
This problem may be covered under warranty. Ask your Dodge dealer.
6.7
fairly significant- Typical Repair Cost:
- No data
- Average Mileage:
- 44,500 miles
- Total Complaints:
- 3 complaints
Most Common Solutions:
- clear the instrument cluster of all learned (1 reports)
- reprogram the instrument cluster of all learned codes (1 reports)
- tsb 08-015-04 (supercedes 08-021-03) (1 reports)
accessories - interior problem
Helpful websites
- No one has added a helpful site for this 2003 Caravan problem yet. Be the first!
A D V E R T I S E M E N T S
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 08-021-03 DATED JUNE 27, 2003 WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH ASTERISKS AND INCLUDES CORRECTING THE SUBJECT. SUBJECT: ABS, BRAKE, TRAC OFF and Security/Vehicle Theft Alarm (VTA) Cluster Lamps Illuminated on Vehicles not Equipped with ABS Brakes or SKIM. OVERVIEW: This bulletin involves using the DRBIII� to clear the instrument cluster of all learned features instead of replacing the instrument cluster. MODELS: 2001 - 2003 (RS) Town & Country/Caravan/Voyager SYMPTOM/CONDITION: Vehicles not equipped with ABS brakes may have the ABS, BRAKE, and TRAC OFF lamps illuminated on the instrument cluster or vehicles not equipped with Sentry Key Immobilizer (SKIM) may have the Security/VTA lamp illuminated on the instrument cluster. DIAGNOSIS: If the condition is present, perform the Repair Procedure. EQUIPMENT REQUIRED: CH6000 Scan Tool (DRBIII�) CH7000 J1962 Cable NOTE: THE DRBIII� MUST BE AT LEVEL 55.0 OR HIGHER AND THE MDS2� AT CD 2111 OR HIGHER TO PERFORM THE REPROGRAMMING. REPAIR PROCEDURE: 1. Connect the DRBIII� to the vehicle diagnostic connector, using cable CH7000. 2. Turn the ignition key to the ON position (engine off). 3. From the DRBIII� Main Menu, select #1 - DRBIII� Standalone 4. Select #1 - 1998 - 2005 Diagnostics 5. Select #1 - All 6. Select #3 - Body Interior 7. Select #2 - Electro/Mech Cluster (MIC) 8. Select #9 - Miscellaneous 08-015-04 -2- 9. Select #1 - Reset Learned Features 10. Follow the directions on the DRBIII� screen. 11. When the DRBIII� returns to the Miscellaneous Menu, select #2 - Reset Module. 12. Erase fault codes using the DRBIII�. 13. Disconnect the DRBIII� from the vehicle. 14. Verify the ABS, BRAKE, TRAC OFF, and Security lamps are no longer illuminated.
- Cyril B., West Haven, CT, US