- July 20: Arizona Files Lawsuit Over Ram 2500 and 3500 Diesel Emissions news | 2 days ago
- July 18: Chrysler Pacifica Hybrid Battery Fire Recall: Park Outside recalls | 4 days ago
- July 16: Ram Diesel Emissions Lawsuit Settlement Preliminarily Approved news | 6 days ago
- July 15: Ram Air Suspension Class Action Lawsuit Dismissed news | 7 days ago
- July 8: Jeep Clutch Recall Lawsuit Baseless, Argues Fiat Chrysler news | 14 days ago
Chrysler TSB #9003756
2017 Chrysler 300C
TSB Document:
Affected Component: BACK OVER PREVENTION
- Summary
- Rain light sensor Rain sense wipers do not operate: 1. Visual Inspection--> Check if the sensor is visually OK. (all the pins are OK) Check that the Connector is NOT loose (Sensor must get a voltage from 9V to 16V) 2. Functional Checks Rain--> Steering column switch is in auto mode (sensor is active) it is necessary to splash water on the sensitive surface of the sensor to trigger wipes. check the same for different sensitivities When the rain sensitivity is increased (for example from level 0 to level 1), as an acknowledgement a single wipe is seen. (This is not a phantom wipe) and this single wipe is not seen when the rain sensitivity is decreased (from higher level to lower level) Light--> Steering column switch is in auto mode (sensor is active) block the light coming on the sensor from outside of the vehicle (use a opaque object), the head lamps should be activated 3. If the sensor seems functional, it is ideal to remove the silicon gel pad from the sensor, replace it with the new silicon gel pad instead of replacing the whole sensor. When servicing the LRSM please replace the silicon gel pad with a new silicon gel pad (PN 68224945AA) instead of replacing the whole sensor.
Click a tab for more information.