- October 28: Chevrolet Recalls Blazer and Equinox Over Door Strikers recalls | 6 days ago
- October 12: GM Vortec Oil Consumption Lawsuit Dismissed news | 22 days ago
- October 8: Enel X Way Closure and JuiceBox Charger Fires Investigated investigations | 26 days ago
- October 2: Chevrolet Bolt Battery Settlement Preliminarily Approved news | 32 days ago
- September 28: GM Shift to Park Class Action Lawsuit Debated in Ohio news | 36 days ago
Chevrolet TSB #PIP5168C
2009 Chevrolet Silverado 2500
TSB Document:
Affected Component: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE)
- Summary
- This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a no crank concern. Technician will need to check the valve train for movement when the engine is cranked. If the valve train is not moving while the crankshaft is moving the front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the valve train is rotating during inspection, disconnect the Camshaft Position sensor and check if the engine will start. If the engine starts front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the engine does not start with the Camshaft Position sensor disconnected the follow published ?Engine Cranks But Does Not Run? diagnosis in Service Information. Also perform an Engine Compression Test and Cylinder Leakage Test in Service Information documents all results. If the Service Information procedures above isolate an engine mechanical concern then removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly.
Click a tab for more information.