originally system warning message to service brake system. had system checked by mechanic. nothing found. after a few weeks as i was merging on a highway i felt my engine start to stall. I immediately tried to make my way to the side of highway. brakes were very hard to press and car stalled with engine light immuninating, and no power steering. code P0017. engine will crank and sputter but will not start also has blowby present. cam and crankshaft sensors/actuator solenoids were replaced, then the vacuum pump cover was opened and found broken parts inside. upon removal of pump it was found broken. suspect broken parts are blocking crankshaft or either of the cams to not be able to rotate properly. this issue possibly has cause timing chain issues as well. parts in the vacuum caused it to seize. exhaust cam continued to spin shattering the end connected on the pump. I have done research and found that others have had the same thing occur with the warning for brake system and then weeks later the brakes do not work, which is due to the pump providing pressure for the brake boost system.

- Sun Valley, NV, USA