- June 27: Cadillac XT5 and XT6 Instrument Panel Recall Announced recalls | 11 days ago
- May 8: Cadillac XT5 Recall Issued to Replace Driver's Airbags recalls | 61 days ago
- May 7: GM Transmission Lawsuit Affects Hydra-Matic 8L90 and 8L45 news | 62 days ago
- April 19: Cadillac LYRIQ Problems Investigated After Brake System Failures investigations | 80 days ago
Cadillac TSB #PIP5062A
2013 Cadillac XTS
TSB Document:
Affected Component: ELECTRICAL SYSTEM:IGNITION
- Summary
- This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that have check engine light and a misfire. Technician will find a P0300 set. If the misfiring cylinder is creating NO or very low power, technician will need to follow these diagnostics steps. 1) Swap the ignition coil and spark plug with another cylinder. 2) Inspect the plug when out for wet or dry condition. 3) Perform an injector test with a scan tool. 4) If the plug is wet then check for a leaking or stuck open injector. 5) If the plug is dry then enrich the intake air with propane. If the severity of the misfire is less with enrichment, suspect a weak or inoperative injector driver in the Engine Control Module and replace as needed. 6) Perform a cylinder leakage test to determine if there is a valve sealing concern. If there is a valve sealing concern see the latest version of PIP5029 for recommendations.
Click a tab for more information.