- November 11: BMW Owner Loses Tip of Thumb in Door, Awarded $1.9 Million news | 7 days ago
- October 27: BMW Diesel Class Action Lawsuit Settlement Approved news | 22 days ago
- October 25: BMW Integrated Brake Recall Issued a Second Time recalls | 24 days ago
- October 11: BMW Water Pump Recall Causes Lawsuit news | 38 days ago
- September 9: BMW X1 Acceleration Lag Lawsuit Filed in Virginia news | 70 days ago
BMW TSB #610314
2016 BMW 428
TSB Document:
Affected Component: ELECTRICAL SYSTEM
- Summary
- Check Control Messages Related to Battery Charge During Cold Ambient Temperatures. On cold days with an outside ambient temperature of less than 15°F, customers may notice a check control message related to the battery that is displayed on the instrument cluster and the control information display. Under these conditions, the vehicle starts. Various power management faults can be stored. When the outside temperatures drop below 46°F, the charging system is switch to full charge. CAUSE ? The check control message (ID 229) is caused by a heavily discharged battery. ? The check control message is triggered when the current state of charge (SoC) of the battery approaches the minimum SoC that is required to start the vehicle (start capability limit). ? In low outside ambient temperatures, the start capability limit of the vehicle is higher. Therefore it takes more energy from the battery to start a cold engine. ? Without the early warning of the check control message, the current state of charge would drop below the start capability limit and the vehicle would not start. ? The vehicle's intelligent power management system actively takes measures to increase the charge of the battery, such as increasing idle speed and reducing or shutting down certain electrical consumers.
Click a tab for more information.