Technical Service Bulletins (TSBs) for the 2016 A3 are official communications between Audi & their dealerships that describe processes for troubleshooting or fixing certain common problems.
All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
This bulletin provides information for when the front shock absorber cap emits cracking noises or causes spring jumps when steering or maneuvering. Read More »
This bulletin states to lightly lubricate the contact surface between the buffer stop for the shock absorber, and the front shock absorber cap to address cracking noises/spring jumps when steering or maneuvering. Read More »
This bulletin contains repair instructions for when DTC B145504 with symptom code 7340800. 48 Steering wheel heater is not working, DTC B145504 is stored in the steering column control module. Read More »
This bulletin explains that the steering wheel may warm up while being held leading to the impression that he steering wheel isn't heating evenly. Read More »
This bulletin states to lightly lubricate the contact surface between the buffer stop and shock absorber cap when cracking noises/spring jumps are detected when steering or maneuvering. Read More »
This bulletin provides repair instructions for instances where creaking/squeaking noises are heard from the left front or right front area of the vehicle when being driven on uneven roads. Read More »
This bulletin provides information for when creaking/squeaking noises are heard from the left front or right front area of the vehicle when driven on uneven roads. Read More »
This bulletin contains information on how to fix a clunking or rattling noise heard from the rear suspension when the vehicle is driven over bumps. Read More »
This bulletin contains repair information for when there is a creaking or squeaking noise from the front of the vehicle. This only occurs on uneven roads. Read More »
This bulletin contains information on how to fix a clunking or rattling noise heard from the rear suspension when the vehicle is driven over bumps. Read More »
This technical service bulletin asks the reader to check for improperly installed or deformed front shock bellows and to replace if necessary. Read More »
This bulletin contains information on how to fix a clunking or rattling noise heard from the rear suspension when the vehicle is driven over bumps. Read More »
This bulletin contains repair information for when there is a creaking or squeaking noise from the front of the vehicle. This only occurs on uneven roads. Read More »
Thos bulletin contains repair information for when there is a creaking or squeaking noise from the front of the vehicle. This only occurs on uneven roads. Read More »
This bulletin states to lightly lubricate the contact surface between the buffer stop for the shock absorber, and the front shock absorber cap to address cracking noises/spring jumps when steering or maneuvering. Read More »
This bulletin contains information on how to fix a clunking or rattling noise heard from the rear suspension when the vehicle is driven over bumps. Read More »
This bulletin states to lightly lubricate the contact surface between the buffer stop for the shock absorber, and the front shock absorber cap to address cracking noises/spring jumps when steering or maneuvering. Read More »
This informational contains an explanation for when the customer hears creaking noises when braking at almost standstill (crawling when pulling away or briefly before standstill). Read More »
This bulletin provides information for when one or more DC is stored in the ABS control unit related to the parking switch; DTC C100C07 and/or C100C29. Read More »
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning. Read More »
This bulletin provides information for when the customer advises that there is cracking, grinding, rattling, humming, whining, or similar interference. Read More »
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. Read More »
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. Read More »
A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Read More »
ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:OIL COOLER
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. Read More »
ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM)
This bulletin contains repair instructions for when the all wheel drive coupling is stuck on or doesn't engage without DTCs stored. Also Audi 2015 and 2016 A3 Cabriolet. Read More »
This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. Read More »
This bulletin contains information for when the message appears in the instrument cluster about the high beam assist and/or traffic sign detection with DTC C12B3FD. Read More »
Elsa2Go campaign information is now 100% aligned with ElsaPro. This update to Elsa2Go ensures that both systems are displaying the same campaign information, including OPEN/CLOSED status, repair date as well as criterions at the same time ... Read More »
This bulletin contains instructions for correcting DTC B12251B and B102229 with airbag/seatbelt warning lamp or the PODs indicator light is displaying incorrectly. Read More »
This technical service bulletin explains how to determine the status of activation keys (that affect the function of Audi drive select, cruise control, navigation, Bluetooth, smartphone interface and voice recognition), and how to update ... Read More »
This bulletin contains instructions for when the MMI shows the message 'Read error occurred when accessing the navigation data' after initialization and reboots constantly with DTC B126CF0 and/or B126CF1. Read More »
This technical service bulletin explains how to determine the status of activation keys (that affect the function of Audi drive select, cruise control, navigation, Bluetooth, smartphone interface and voice recognition), and how to update ... Read More »
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet. Read More »
This bulletin provides instructions for when the anti-theft alarm has gone off for no reason, or did not go off at all. No DTCs are stored. Read More »
This bulletin contains information for when the message appears in the instrument cluster about the high beam assist and/or traffic sign detection with DTC C12B3FD. Read More »
This bulletin contains information for when the messages appear in the instrument cluster about the high beam assist and/or traffic sign detection with DTC C12B3FD. Read More »
This informational bulletin provides an explanation for the customer regarding known software issues with the MIB & MMI3G+ bluetooth security profile. Read More »
This technical service bulletin explains how to determine the status of activation keys (that affect the function of Audi drive select, cruise control, navigation, Bluetooth, smartphone interface and voice recognition), and how to update ... Read More »
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update. Read More »
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning. Read More »
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning. Read More »
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning. Read More »
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning. Read More »
This bulletin provides information when the all-wheel drive coupling does not work, the fuse is blown or the DTC C111204 is stored in the all-wheel drive control module. Read More »
This information bulletin states to remove the car wash bristle and advise the customer to go somewhere else to prevent it from occurring again. Read More »
This bulletin contains information for when the messages appear in the instrument cluster about the high beam assist and/or traffic sign detection with DTC C12B3FD. Read More »
This bulletin provides instructions for when faint images appear on the windshield from the production sticker, or an image of the suction cups used to install the windshield in production. Read More »
This bulletin contains instructions for correcting DTC B12251B, B102229, and/or B102202 with airbag/seatbelt warning lamp or the PODs indicator light is displaying incorrectly. Read More »
This bulletin contains instructions for correcting DTC B12251B, B102229, and/or B102202 with airbag/seatbelt warning lamp or the PODs indicator light is displaying incorrectly. Read More »
This bulletin contains instructions for correcting DTC B12251B and B102229 with airbag/seatbelt warning lamp or the PODs indicator light is displaying incorrectly. Read More »
This bulletin contains instructions for correcting DTC B12251B, B102229, and/or B102202 with airbag/seatbelt warning lamp or the PODs indicator light is displaying incorrectly. Read More »
This bulletin contains instructions for correcting DTC B12251B, B102229, and/or B102202 with airbag/seatbelt warning lamp or the PODs indicator light is displaying incorrectly. Read More »
This bulletin contains instructions for correcting DTC B12251B and B102229 with airbag/seatbelt warning lamp or the PODs indicator light is displaying incorrectly. Read More »
This information bulletin states to remove the car wash bristle and advise the customer to go somewhere else to prevent it from occurring again. Read More »
This bulletin contains repair instructions for various squeaks and/or rattles that are heard from the roof area on vehicles equipped with pananormic sunroof. Read More »
This bulletin provides instructions for when a vibration is felt in the floor, seat, footwell, pedals or steering wheel while driving at highway speeds from 55 - 80 mph. Read More »
This bulletin provides information regarding vibrations or movement that are felt in the wheel. 2015-2020 A3 Cabriolet, 2016-2018 A3 Sportback, 2008-2009 S4 Cabriolet, 2008 and 2010 RS4 Cabriolet, 2018-2020 A5 Sportback, 2010-2012 and ... Read More »
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked. 2019-2021 A3 Cabriolet, A5 Sportback, RS5 Cabriolet, S5 Sportback, 2021 RS6 Avant Read More »
This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. Read More »
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update. Read More »
This bulletin explains that the steering wheel may warm up while being held leading to the impression that he steering wheel isn't heating evenly. Read More »
This technical service bulletin informs the reader that damage to the appearance of the leather steering wheel caused by outside influence is not covered under warranty. Read More »
This bulletin contains information on how to fix a clunking or rattling noise heard from the rear suspension when the vehicle is driven over bumps. Read More »
This bulletin contains instructions for additional reporting requirements for safety related inquiries (airbag/seatbelts, accidents, fire and overheat damage). Read More »
This bulletin contains repair instructions for various squeaks and/or rattles that are heard from the roof area on vehicles equipped with pananormic sunroof. Read More »
This informational contains an explanation for when the customer hears creaking noises when braking at almost standstill (crawling when pulling away or briefly before standstill). Read More »
This bulletin contains instructions for when the MMI shows the message 'Read error occurred when accessing the navigation data' after initialization and reboots constantly with DTC B126CF0 and/or B126CF1. Read More »
This bulletin contains information on how to fix a clunking or rattling noise heard from the rear suspension when the vehicle is driven over bumps. Read More »
This informational bulletin contains instructions for when a phone is connected to the vehicle via Bluetooth, one of the following conditions occurs when the user searches for a contact name in the MMI address book (by using the MMI ... Read More »
This technical service bulletin explains how to determine the status of activation keys (that affect the function of Audi drive select, cruise control, navigation, Bluetooth, smartphone interface and voice recognition), and how to update ... Read More »
This technical service bulletin explains how to determine the status of activation keys (that affect the function of Audi drive select, cruise control, navigation, Bluetooth, smartphone interface and voice recognition), and how to update ... Read More »
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet. Read More »
This bulletin provides information for when high beam assist or traffic sign detection limited, DTC 12B3FD may be stored in the DAS control module. Read More »
This technical service bulletin explains how to determine the status of activation keys (that affect the function of Audi drive select, cruise control, navigation, Bluetooth, smartphone interface and voice recognition), and how to update ... Read More »
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet. Read More »
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update. Read More »
This bulletin contains instructions for when the MMI shows the message "Read error occurred when accessing the navigation data" after initialization and reboots constantly with DTC B126CF0 and/or B126CF1. Read More »
This bulletin contains instructions for when the MMI shows the message 'Read error occurred when accessing the navigation data' after initialization and reboots constantly with DTC B126CF0 and/or B126CF1. Read More »
This bulletin advises that the MMI screen may freeze, or go blank and then restart when a special character like a symbol or emoticon is used in the name field for contact(s). Read More »
This technical service bulletin explains how to determine the status of activation keys (that affect the function of Audi drive select, cruise control, navigation, Bluetooth, smartphone interface and voice recognition), and how to update ... Read More »
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet. Read More »
This bulletin contains repair information for when there is a creaking or squeaking noise from the front of the vehicle. This only occurs on uneven roads. Read More »
This informational bulletin contains instructions for when the message "Audi pre sense currently restricted. See owner's manual" is displayed in the instrument cluster without DTCs. Read More »
This information bulletin states to remove the car wash bristle and advise the customer to go somewhere else to prevent it from occurring again. Read More »
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning. Read More »
This bulletin contains instructions for correcting DTC B12251B and B102229 with airbag/seatbelt warning lamp or the PODs indicator light is displaying incorrectly. Read More »
This bulletin explains that the steering wheel may warm up while being held leading to the impression that he steering wheel isn't heating evenly. Read More »
This informational bulletin provides an explanation for the customer regarding known software issues with the MIB & MMI3G+ bluetooth security profile. Read More »
This technical service bulletin explains how to determine the status of activation keys (that affect the function of Audi drive select, cruise control, navigation, Bluetooth, smartphone interface and voice recognition), and how to update ... Read More »
This bulletin provides information when there are scratches, or a coating on the cover of the instrument cluster, or particles in the housing. Read More »
This bulletin provides information when the all-wheel drive coupling does not work, the fuse is blown or the DTC C111204 is stored in the all-wheel drive control module. Read More »
This bulletin contains repair instructions for various squeaks and/or rattles that are heard from the roof area on vehicles equipped with pananormic sunroof. Read More »
This bulletin contains instructions for when the MMI shows the message 'Read error occurred when accessing the navigation data' after initialization and reboots constantly. Read More »
This technical service bulletin explains how to determine the status of activation keys (that affect the function of Audi drive select, cruise control, navigation, Bluetooth, smartphone interface and voice recognition), and how to update ... Read More »